Virgin video in the timeline but the audio is ok

Similar Questions

• In Movie Maker, I want to place a photo on a part of a video without stopping the audio from the video.

  It's all in Windows Movie Maker (Windows Vista)

  Example:

  First of all, I want to have a video (with audio),
  change photo (with audio video) and then continue to the same as before (with audio) video

  I have a video with audio.
  I want to put an image instead of the Visual part of the video.
  But in doing so, I want to still the audio from the video to play while the image is on the screen.

  Please help me, I need the answer as soon as possible.

  Hi benlach,

  Welcome on the site of Microsoft Windows Vista Community.  I suggest you try these methods

  Method 1:

  1. drag a copy of the video on the audio / music.

  2. her completely to the left on the track.

  3. right click / Mute the Audio track... now the audio will be separated from the video but still play correctly.

  4. divide the video and to delete an article of the same duration as it turned again.

  Method 2:

  1 divide your video clip on each side of the area where will be the stills.

  2. now... drag the part cut on the audio / music. BTW... If you want to add a second 5 again... Remove 5 seconds of the video clip. (Info below on the separation if you need)

  3. slide your shots yet to the time line and drop them to the location where you have removed the video.

  4. the Audio clip on the audio / music can be dragged to the right or left to adjust its position.

  Info on splitting...

  "Split a Clip in Movie Maker 2.1"

  1. drag the video clip on the timeline.

  2. play the video/audio by clicking on the 'Play' button under the display screen.

  3. you will see the playback indicator (vertical line) to move forward on the scenario.

  4. click on the "Pause" button at the location where you want to cut and type... CTRL + L or click the "Split" button at the bottom of the display screen. (You can also make adjustments by dragging the playback indicator)

  5. as the many coves that you want and delete unwanted items by right click / Delete.

  And... Movie Maker 2.1 shows that all of the other images. To see all the pictures of Movie Maker 2 shows you all-other-frame. While you are editing project, Movie Maker Vista displays each image. It is generally not a problem ignoring middle managers, but sometimes you notice a flickering image in a clip that is a "stray", and you can not see or cut it out. If you apply the Slow - Down - half video effect to a clip in the timeline panel, see you then each image rather than everyone. You can see the frame problem and separate out. Remove the effect of the clamp to return to normal.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How "unpin" the audio from the video?

  Hello

  I have a video clip on the timeline. I wanted to move the video but the sound of the rest where he is...

  Whenever I selected / highlighted video, audio correspondent below also automatically selected / highlighted. How to choose the video without the audio selected?

  Thank you

  Right-click on the clip on the timeline > unlink. Select the video, and then move it.

  .

• Replace the audio track on a video

  So I cleaned up the audio on my video interview with hearing, now, I would like to replace the old audio on existing video in first, I know that I can make a new sequence with the new audio file in separate but I prefer to replace the old audio track, because it makes editing more easy at first, is there a way to do it?

  You can merge the video with the audio again.  This process will give you the option to remove the original sound.

  However, this creates a new clip merged, which has no impact on what already either in a sequence.  If you have not done no editing, however, it's a good way to do.

• Help please - CS5.5 Why is the audio track not projection in the timeline?

  Of course, I would appreciate your help.  I have been using Adobe first 6, then 6.5 years as a hobby.  I'm a big fan of the first.  Around November 2011, I upgraded to CS5.5.

  I was working on a video with my son recently.  We use MPEG4 video of his digital camera.  I never have this problem.

  Imported fine video.  The problem is that the audio do not arise in the audio track.  When we played the video track, the audio played, but doesn't

  no show.  Out of curiosity I opened the first Elements to see if the audio track would show the video track separately, and he did.

  Is there something I can do to make the audio track appears in CS5.5?

  Thank you for your time and your help.

  Until you see one that you can't see, scroll down the audio tracks. It can be on track 4 or even raining down.

• all of a sudden the audio to youtube does not work? OK but in IE

  all of a sudden when I play a YouTube video of the audio does not work. Works fine in Internet Explorer.

  Did you also check the plugin-container parameter in the Volume mixer?

  You will see Firefox or plugin-container in the mixer volume if you're on a Web site that is running a media (audio) file.

  See also:

  • https://support.Mozilla.com/kb/no+sound+in+Firefox

• Windows Media Player has information about the Audio track and impossible to delete. What is a codec setting?

  Hello
  I'm watching a video and the Audio Track Info appears on the film. I tried to remove it with the settings, but no results. Y at - it a codec setting or Encoder running which is the cause?

  Thank you

  It's the FFDShow (a third-party codec) which has an OSD "on the screen.
  Display"setting. To turn off power, either check the FF... next icon
  the windows clock (right-click to select menus)

  Or in WMP, go to the drop down small playing below, click other
  Options of-> DVD-> advanced, and then clear the OSD off

• At the beginning and end of the audio Volume control

  How to set the volume at the beginning and the end of audio?  So volume up slightly at full volume in middle to lower the volume and at the end of the audio?

  The f

  Each question is important if you do not have an answer for her. So please never hesitate to ask if you need clarification on anything I wrote or need additional information.

  With regard to the location of the Audio Mixer in first elements 11 Windows 8 64-bit (as for Windows 7 64 bit)...

  Access is under the Tools Menu at the top of the workspace Expert or Tools tabs at the bottom. Please refer to the screenshot

  

  In addition to what has already been post, here's some additional information about your questions.

  If you have not already seen, please check the excellent document Adobe 'Premiere elements/Audio Mixer and Volume control.

  http://help.Adobe.com/en_US/premiereelements/using/WS6C96BC86-7342-44a4-8D3F-936C1D66DE0B. HTML

  I think you'll do OK with the Audio Mixer Panel. But, you can explore keyframing the volume level of the audio element 'elastic '. It is the orange line which runs horizontally through the middle of the audio clip.

  a. hold CTRL of the computer main keyboard and the left mouse click on a place where you want to place a keyframe volume. You can do it in as many places on the rubberband if necessary. Then, with the mouse cursor, move the White points (keyframes) up or down to increase or decrease the volume to a location along the clip.

  

  Here's a blog I wrote about the video and the Audio Track Rubberbands (with graphic how) that should help you to correctly enter this particular workflow.

  http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html

  Thank you for the opportunity to help with your workflow in Premiere Elements. Screenshots are all first elements 11 Windows.

  RTA

• Video does not load in the timeline, but audio only

  I'm trying to drag and drop my tray video media in the timeline. When I drag and drop there is no video. Only the audio file appears in the timeline panel. If create a new sequence of the video, it works very well. But now I can not add the video imported without encountering this problem.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

• Audio won't come with video on the timeline

  I've just updated Premier Pro to version 2015.2 and now when I put them a video clip with audio on the timeline, only the video will come in. I can preview the audio clip in the clip Editor, but it won't let me get with audio on the timeline. I get only audio clips on the timeline, like music or narration but video clips with audio, it only will come the video portion.

  I thought that my project is maybe corrupted, so I tried in other projects and the same thing happens.  I also tried to restart the computer, but nothing seems to work.  I wonder if there is a setting I need to turn it on in preferences or is this a bug in my update. I'm on a PC with Windows 7
  
  Any help would be greatly appreciated.
  
  I thank in advance
  Lyndon

  Make sure that your Source patch and the targeting of the track are set correctly:

  

  MtD

• As you drag the video in the Timeline, only audio files will show, not video.  Why

  Hello world!

  So I had to update to PPCC 2015 after 2014 CEP kept crashing on me while I just changed.  After having reopened the project and the program telling me to convert everything on the new 2015 PPCC, I didn't think it was a big deal.

  Well now, the old version of my project can still play all the videos, and the editing I've done, but when I try to drag in a new video to continue editing, only audio files will come in the timeline. The video will play in the window of the fine source drive, but try to get the actual image of the video in the timeline, will not be displayed.

  It makes me crazy!

  What should I do?

  It was activated at the same time. I closed my projects and rebooted my computer to see if that would do anything and now it works as usual. Thanks for your help anyway!

• is there a way to NEST or MERGE videos and keep the audio waveform in the timeline?

  Hi guys,.

  I was struggling with solutions for my workflow.

  I do a lot a microphone on a single video track changes. Then when I want to apply and modify the presets, I must apply the effects on all the small changes (sometimes 100 edits in a 3 minute clip).

  So I learned about fusion - but the merger does not allow you to modify the effects in the batch. So in the above example, if I want to make a change in an effect in a merged item, I have to hold single OPTION click on all editions of 100 and then adjust the effects.

  Then I bent over the NESTING. It works pretty well because it transforms all 100 mounts in 1 clip and I can't batch "edict", which means that I can change the effects on all editions of 100 at a time (because it's now 1 clip on the timeline). "

  However, the problem I have now nesting is... get rid of the file audio waveform in the timeline panel. So now, it is difficult to edit audio.

  Is there a way to merge, merge or nest together to make 1 clip (like nesting) and also to keep the audio waveform on the chronology of the changes?

  Kind regards

  Try the sequence > rendered audio and see if you get a waveform.

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• Videos, play not because it shows a green box but again the audio content

  I then some videos from my iPhone to my new laptop because I wanted to free up space. They appear when that I check all, but when I try to play a video, it shows a green box but again the audio to video. Can someone tell me what is happening and how to fix it?

  You can miss the codec (decoder used for video playback).

  What version of Windows do you have?

• Windows/Windows Live Movie Maker no video black screen. but with the audio and subtitles...

  I made a movie in windows live Director and windows movie maker in windows live movie maker, he's playing very well and I've registered as a project and a movie (on my computer), but as soon as I opened in windows movie maker, windows MediaPlayer, youtube or anywhere else, half of the video goes to a black screen. I had all the audio and subtitles, ect for the first minutes of my film no photo or video. I tried to convert the file type, I tried to burn to a disc, then I just gave up and he made once again. still the same problem... Please help? :(* Le fichier EST àle format WMV et je l'ai ai copié et converti en autres formats et juste le même problème à nouveau... quelqu'un peut_il s'il vous PLAÎT m'aider?) its for a project, my friends and I are trying to do and we spent 5 weeks of filming and editing just to be confronted with a problem end:(, je serai vraiment reconnaissante à toute personne si ils peuvent m'aider à résoudre ce problème)

  Hello

  The question you have posted is related to Windows live and will be well suited in the Windows live forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=5