Cannot open a file that it created CS6
I have some files created in and saved by CS6 (in JPEG format) that it cannot re - open. (Next day, no update or anything else.)
The message says:
"Could not complete your request because it is a type of marker JPEG unknown or not valid."
How Photoshop can create a file, it can not read?
More importantly, how avoid this in the future?
Hello
This problem is usually caused by saving a file with an extension that does not match its actual size. For example, the screenshot below, I've changed manually the extension marker in the field record under .jpg but drop Format indicates that the file will be saved in the Photoshop .psd format.
Below are directions to check if your issue is due to formats (I use Mac, but you can find indications of PC here) and markers of file do not match.
1. find the file you get the error message. Right-click on the file and select information.
2 confirm that you have an incompatible file format and marker. As you can see, name and extension my file see 'circle.jpg' but the file type is an Adobe Photoshop file. The same question could be if applied to other format combinations do not match, not just jpg/psd.
3 to fix this, simply type the file extension that corresponds to the file type - in my case, I replaced circle.jpg in the name and Extension field with circle.psd.
You should now be able to open your file with Photoshop and re - save the image in JPEG format. To avoid this problem doesn't happen in the future, always make sure that when you go to file > save under you remove or change the file extension in the field save slot, and the extension corresponding to the file format selected.
If you have any questions, or if it has not addressed the problem, please feel free to post a reply. In addition, , This is a very comprehensive article on other reasons that this problem could occur and how to fix it.
See you soon,.
Kendall
Tags: Photoshop
Similar Questions
-
original title: DOC files
Cannot open DOC files that are sent to me. I have wordpad and Notepad on my computer but you do not have Microsoft Office. Most of the time, I get a screen that says 'open' or 'save' the file and when I click on 'Open', this message disappears. Sometimes it opens, but the message is completely scrambled with letters and symbols.
Cannot open DOC files in wordpad or Notepad. you will need a more advanced software suite. Try OpenOffice.org - it's free, and it supports the DOC format. But the best solution is to get Microsoft Office once and for all.
Download OpenOffice.org: http://download.openoffice.org/contribute.html?download=mirrorbrain&files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe. Note: Click on the link at the bottom that says "http://download.services.openoffice.org/files/stable/3.2.1/OOo_3.2.1_Win_x86_install-wJRE_en-US.exe" to download the program.
This should solve your problem,
Rifdhan
-
Cannot delete a file that I created
I created a file then created another file and registered under the same name, which worked. The usual windows save as. Now, I can't open the file. I can't delete the file. I can't change anything in the properties. I want to really just delete the file. When I do, I get "error deleting the file or folder: cannot delete < Filename > access is denied ' I use a version fully update 7.
There is an excellent freeware called Unlocker that will tell you what applications are locks the file and you cannot remove.
Have a look here: http://www.filehippo.com/download_unlocker/
-
Cannot open a file that is encrypted
Original title: I think I need to set an encryption
I can't open a file and the properties indicates that it is encrypted. How can I change the encryption?
Hi vonfurstenburg,
1. have you tried encrypt the file by using a third-party tool?
If Yes, then you will have to decipher using the same software.
You can also read the following article and check if help to:
How to remove encryption from a file or a folder in Windows XP
http://support.Microsoft.com/kb/308993
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I am an administrator on my current account, can someone help me please, help is very appreciated. I've read other threads and try to find solutions, but no luck.
Hello
- You did changes to the computer before the show?
- What version of web browser work?
You can temporarily disable the antivirus software, and then try to install programs, and also try to open .exe files to check if that helps.
Check the link for more information.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps!
-
I just update the latest version of Adobe Creative cloud Muse. But when I try to open the file... "Cannot open file. This Adobe Muse site file requires a newer version of Adobe Muse. Please upgrade to the latest version. "Where is the problem? Thank you in advance.
Hello
You have probably 2 versions of Muse on your machine.
Please check the folder Applications (Macintosh); or the Program files (Windows), for Muse applications installed.
Run the latest version and try to open the file.
Let me know if this helps.
Concerning
Sonam
-
Cannot open some files that I was sent
I have specific emails that I can not open with Adobe or Windows. An online search indicates they are .doc files, but can't find what
I need to open.Hey, Toyota
. DOC files to open with Microsoft Word. You can download a trial version for 60 days for free.
http://US1.trymicrosoftoffice.com/default.aspx
I hope this helps! Mark <> Microsoft Partner
-
Can help please I want to play freecell and solitaire that came with my pc but I get this error message... Why would he do that? How can I solve this problem?
original title: windows cannot open this file: free cell.exe.mui.Hello
1. don't you make changes to the computer?
These can help you:
Method 1: Perform a system restore
To get the procedure perform system restore, open the site mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Method 2: Clean boot
For the procedure to place the computer in a clean boot, open the site mentioned below
http://support.microsoft.com/kb/929135.
Note: To set the computer back to start normally, use the step 7 in the same link.
Method 3: Check the new user account
Open the site mentioned below for steps to create a new user account
http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account.
I hope this helps.
-
IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?
Hi JRCLNSIN100,
Welcome to Microsoft Answers Forums.
We would like to get some more information from you to help solve your problem. You better, please answer the following questions.
· What is the disk you use to reinstall?
· Is this a recovery or reinstalling the disc you are using?
· When exactly do you get this error message?
· What is the edition of Windows Vista, you try to install?
· How old is the drive that you are using?
· How are you starting the installation process?
After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.
First check if you have scratches or dust on the disc and clean the surface and try again.
To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.
To perform a flat installation of Windows Vista, follow these steps.
Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:
http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx
- Insert the Windows Vista installation disc.
- Start Windows Explorer.
- In Windows Explorer, click to select the drive for the Windows Vista installation disc.
- On the Edit menu, click select all.
- On the Edit menu, click copy.
- Click to select the hard disk you want to contain the flat installation files.
- On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
- Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
- Double-click Setup.exe, and then follow the instructions that appear.
See the link below for more information on flat installation.
How to perform a flat installation of Windows Vista
http://support.Microsoft.com/kb/928902
This problem can also occur if the firmware of the DVD drive is defective or obsolete.
If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.
For more information please visit the link below.
Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".
http://support.Microsoft.com/kb/930984
Hope this information is useful.
Let me know if it worked.
All the best!
Thanks and greetings
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Disk defrag cannot open a file(system32\dfrg.msc) to run
This message appears when I click to open the defragmentation program:
MMC cannot open the file c:\WINDOWS\system32\dfrg.msc.
This file does not exist, is not an MMC console, or was created by a later version of MMC.Then what should I do? I looked around and I still have the file on the computer but I can't open it to all. My computer needs to defragment very badly. It there a way to get a new file or program? Or can I replace this question?
Help
Hi Highhopespf,
Thank you for using Microsoft Answers!I have seen that the installation of Service Pack 3 can sometimes fix this.The following link should help you get installed: http://support.microsoft.com/kb/322389Let me know if that helps!Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I get a message saying "Windows cannot open the file...". »
I had a lot of problems with infections, so I was running many scanning programs.
After getting my computer almost completely cleaned, I ran the Super Anti-Spyware program. We find 3 infections, which I'd delete (I don't have no way of knowing that I removed).
Since then, whenever I try to open a program, or even Windows Update, etc., I get a message saying:
"Windows cannot open the file. To open this file, Windows needs to know what kind of program has created. Windows can go online to search automatically, or you can manually select from a list of programs.
When I go on the web, I get a lot of options, which are almost free scans that then charge for fixing. I am also very scared that I can also get another infection from these sites.
I hope someone can help me solve this problem.
StanEp
Yes, each method is a set of measures to try and then go ahead and try each one separate.
2 method will reset the executable (.exe) extension that will allow you to open programs. It is not clear what exactly you are trying to open so that it can have no effect.
Keep in mind that the damage caused by malware can be irreversible, in the case of relocations are necessary.
-
When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.
Hello
I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
Thank you -
Cannot open .exe files and the desktop icons appear as the white sheet
Original title: Iopening programs
Cannot open exe files. Removed several programs and all the desktop icons changed to a white sheet with a picture of a computer. Get error install disc insert message "for HP photo and image to reload.
Hello
· What are the programs that you have removed from the system?
Method 1:
I suggest you follow the steps mentioned in the article below.
Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer
http://support.Microsoft.com/kb/923077/en-us
Method 2:
I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved. Follow the steps mentioned in the article below.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084/en-us
Method 3:
Perhaps, your user account is damaged. I suggest to create a new user account and check if the problem persists. Follow the steps mentioned in the article below.
How to create and configure user accounts in Windows XP
-
Original title:
MS Info
I need to send a file Ms Info to Wb tech support so that they can help me with the game on steam download. Whenever they open the file it says it gives the following message "information MS cannot open this file. The file may be corrupt or incompatible with this version of the information system. "I tried to open it too and had the same error message how can I send a file not corrupted for them?
Information MS cannot open this file.
They should use Notepad to open the file when it is a txt file.
Another way to create a portable system information file is to select the hotkey Win + R, type msinfo32 , and press ENTER . Click file, Save and name the file. This method creates a file with an extension of nfo file. Perhaps the recipient expects the file in this format.
-
Dmp file that is created by Windows in a collision
Why the dmp file that is created by Windows in a collision is unreadable by Windows, with a message that Windows does not recognize this file type. Really, it's quite shocking to have the operating system to create a file once a critical failure and the operating system cannot even read this type of file. It would be laughable if Windows has cost £/ $0.01 but it doesn't. It is quite appalling. I really don't want to download a third party software to do this, and neither turning well should I.
You can follow the link below:
http://support.Microsoft.com/kb/315263The reason does not provide native support for the type of file, is that the file contains complex entries that must be consulted for debugging by people who are aware of the work of Windows. But, Windows is used by the common people and it is not possible to expect everyone to be aware of this (like Linux) and so Microsoft provides no native support in Windows for the file type. So, those interested can download all the necessary tools to open the file. It's like Visual Studio.
Maybe you are looking for
-
I'm updating to win10 about a month ago. Since 3 days wifi disconnect every minute... is it because of a windows update? concerning
-
Hi guys,. Part of my current LabVIEW project involves me using a video stream, and the user will have to draw several Kings on the power supply. I would like to be able to allow the user to use an interface buttons to control the creation and the rem
-
shared variables does not not on PC
Can someone tell the attached page, why my single variable sharing does not work with the LabVIEW application that I'm running on my PC. I put the variable 48 (I thought), and again in la OR Distributed System Manager, the value is not changed.
-
HP Pavilion dv6-2147el: PROBLEM WITH 10 SCROLLING WINDOWS
Hi guys , I'm new My problem is this , and already known : after resetting the computer and have it upgraded to Windows 10 it does not work as the scroll, in practice I can not scroll more pages Nee vertical nor in horizontal . I state that all drive
-
When I try to do a disk defrag it says defrag disk could not start. Why__
I'm trying to drive defrag, but it says it could not start. What should I do to fix this