Cannot open the coral usng images

Similar Questions

• Cannot open the folder of IMAGES on SONY NWZ - E383 Walkman using Windows Explorer.

  I loaded several songs, videos and photos on the Walkman NWZ-E383.

  The PICTURES folder has become inaccessible to Windows Explorer (cannot open to add or remove photos).

  Any ideas?

  Joffrey:

  I tried your suggestion, but I am still unable to access the folder IMAGES using Windows Explorer.

  The progress bar green in Windows Explorer at the top never quite reaches the right side.

  MUSIC and VIDEO files work fine.

  I even tried pressing the RESET button at the back of the Walkman, without success.

  What other ideas can you suggest?

  Thank you.

  Clay

• Cannot open the RAMDISK IMAGE file MINIPE\WIPE.IS_ CAN NOT BE LOAD error Code is 7

  HELP PLEASE

  I forgot my windows password 8 Pro. Tried several programs Freeware - different product Code to these Apps - no work!

  A reset of password - but is fails (cannot open the RAMDISK IMAGE file MINIPE\WIPE.IS_ CAN NOT BE LOAD error Code is 7)?

  Do I have to buy a soft reset? Buy new Microsoft product key?

  I read somewhere that I can use regedit (run as administrator), but have no details. I thank all of you for your help since. I would really appreciate help with this or I'm screwed.

  Thanks again

  Hippie TOKE

  Hey Hippie,

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Please click the link mentioned below on Microsoft Policy all lost or forgotten the password.

  http://support.Microsoft.com/kb/189126/en-us

  Answer please if you have any questions.

• Cannot open the Canon 7 d Mark II Raw files PES 9. [was: download Raw images]

  I have Adobe Photoshop Elements 9. I have a Canon 7 d camera of the brand he's.

  When I shoot in Raw Adobe cannot open the image. I was told that I need to download the most recent record.

  Not this intelligent computer, whatever, how should I do this, and where I get it?

  Thank you

  Robert G

  The 7 5 d Mark II was first supported by Camera Raw version 8.7 (the plugin used by Photoshop Elements to open Raw files)

  Devices supported by Camera Raw

  Camera Raw 8.7 is only compatible with 13 elements and later versions.

  Elements 9 is compatible only with versions of Camera Raw 6.1 to 6.5 included so you will never be able to open the Raw of Mark II 7 d files in Elements 9.

  You have two choices:

  1. Upgrade to the latest version of items (currently 14 but is there a new version due every day now), or
  2. Download the free Adobe DNG converter, batch convert all 7 d Mark II Raw files to DNG format and then edit DNG files in Elements 9. An extra step for you, but no extra costs.
     Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC
     Camera Raw: How to use Adobe DNG Converter - YouTube

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?

• IdeaPad Y450 - message 'cannot open the camera.

  I recently bought a Lenovo IdeaPad Y450. There is a problem with the camera. I use the Windows 7 32-bit operating system.

  I installed the drivers and the Lenovo easy Capture software.

  When I check the Device Manager on my computer, the camera is listed under imaging devices and it indicates that the device is functioning properly.

  Other USB devices on my computer work correctly.

  When I open the Lenovo easy Capture software, I get the following message: "cannot open the camera.

  I tried to uninstall everything and do a fresh install, but nothing seems not to solve this problem.

  Do you have any suggestions?

  
  

• Vision Builder HAVE: (Hex 0xFFFA960C) cannot open the record of inspection.

  I HAV built an inspection in the generator of vision for automated inspection (the code, the image and inspection is provided in the attachment)
  but my program cannot open the inspection is to launch an error: error-354804 occurred in VBAI Interface - open Inspection.vi.

  I am using the NI 1742 smart camera and run the program on the remote target

  I don't get the reason for this error.

  If smbdy can solve... Please...

  I think the problem is that the path you specify is invalid for a goal of RT. On the RT, the 'path' should just be the name of the inspection. If you look at help for the VI open Inspection, it says to use the get target Inpections VI to see what paths for all controls are... sometimes the path is a name of numbers subsequent, though it may not be what you think.

  Hope this helps,

  Brad

• Cannot start Microsoft Outlook. Cannot open the Outlook window.

  I tried running Outlook.exe / resetnavpane because I see it worked for a ton of people - but I got the error message "cannot start Microsoft Office Outlook.  The command line argument is not valid.  Check the switch you are using.

  This is almost always due to:

  1. you have an older version of Outlook that does not have command line switch.  What version of Outlook you have?
  2. you have not put a space between "Outlook.exe" and "/ resetnavpane.

  Cannot start Microsoft Office Outlook. Cannot open the Outlook window.

  For Microsoft Office Outlook 2007 command line switches
  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Minnie3,

  You may need to change the default program that opens the images.
  Take a look at the following link for more information: http://windows.microsoft.com/en-us/windows-vista/Change-which-programs-Windows-uses-by-default
  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the windows store, a message comes on that I'm not on the internet, or it has expired.

  Original title: 8.0 to 8.1

  Cannot open the windows of my new computer store. I'm now 22 things that are in the box in the store. Whenever I try to open the store, a message lights up, that I am either not on the internet, or it has expired. I don't know what to do. Thank you

  (1) try to reset the cache to the Store: right click on the Windows icon at the bottom left, click Run, type wsreset.exe, enter

  (2) run the troubleshooter App: http://windows.microsoft.com/en-US/windows-8/what-troubleshoot-problems-app

  (3) (3) partir go to a command prompt (Administrator), run the following commands

  (1) sfc/scannow, enter. Restart your computer

  (2) Dism.exe / Online/Cleanup-Image /ScanHealth

  (3) Dism.exe/online /Cleanup - /RestoreHealth Image, restart, and then try to open the store

  (4) re - run sfc/scannow then restart if necessary

  Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  If this has answered your message please mark as answer

• CS4 Web Standard: upgrade of control; Cannot open the Dw & Fw

  I got a new pc 3 weeks; transferred * CS4, then the launch of Dw and Fw, there is a message (as shown below) box for example

  the license is on an experimental basis. But I misplaced the MX2004 license and today the trial expires, and I can't open/launch Dw and Fw.

  I have reinstall CS4 (DVD), but still cannot open the Dw & Fw

  I am the user ONLY of MX or CS and the current/new * pc is my 3rd or 4th CS4 (DVD set) bought in 2008.

  (*) - The previous and new pc works on Windows 10.

  -It could have been errors during the transfers/back up between the discs (unfortunately, given in the external hard have)
  removed)

  I chat with adobe support and they asked me to go on the forums; That's why I appreciate for any assistance given.

  Finally, I am a user of Fw & Dw base; Use them only for image and text content, and for now, I really need to change content

  and sent to a new site.

  Thank you.

  

  

  The only way to get the programs to work is to enter the serial number of the previous product. Did you register your original software with Macromedia? If so, you should be able to get your serial number by logging in to your Adobe account. If this isn't the case, you're out of luck.

• Cannot open with photoshop CS2 image

  I got this camera, Canon 50 d, for little more than two years.

  Now it's time to start working with Raw image and cannot open the image with Photoshop.

  But I could open me with EOS utility for working with Photoshop.

  Thanks for reading and tips pleae

  Photoshop CS2 will never be directly open a Canon EOS - 50 d raw file.  The raw files of each device are different and your camera has been designed after the Photoshop CS2, Camera Raw application has stopped to receive updates.

  This list is relevant:

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  That said, there is a free solution that will allow you to open your pictures indirectly.

  • Download and install the latest version of the free Adobe DNG Converter:
    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5388 (Mac)
    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5389 (PC)
  • Whenever you have a folder full of 50 d raw images run the DNG Converter on the folder to convert all files to DNG.  You will need to select the appropriate compatibility setting.
  • You can now open the DNG files with Camera Raw in Photoshop CS2 converter.

  Either way, the latest version of Photoshop Camera Raw Converter offers better quality images, then you want may be mobile until Photoshop CS6.  Unfortunately, you will have to pay full price; it's not Photoshop CS2-> discount CS6 upgrade.

  -Christmas

• Error generating content. Cannot open the InDesign file.

  Hey all -

  In the import of an article on a folio, I just got this error:

  "Content generation error.

  Cannot open the InDesign file. Please confirm that the file can be opened in InDesign.

  The file is opened now in InDesign. I can close and reopen without error.

  I tried to save again article in a new file. No help.

  I tried to create a new folio and bring the article there. No help.

  All links are good. It is a simple file with images, a pane scroll and buttons that link to other articles.

  Anyone experience this problem? All solutions?

  Thank you!

  as suggested above, Amy if you download items from a network drive, move your files to local computer HD and download from there. Download the data to a network drive is known to cause unpredictable errors

• Cannot open the PNG, cannot reonstitute table

  I have a set Png that does not open. When I try to open them from the desktop or via the menu file, I get an error saying "cannot open the file, an internal error has occurred."
  
  the Start page occasionally said something like a "unrecognized language was requested (fr).»
  
  When I try to restore the paintings, FW crashes.
  
  How can I fix?
  
  

  nickymc wrote:
  > Probably. I did a clean reinstall. You think I'm hooked when FW cannot
  > find a previously assigned fonts?

  Who has been known to occur. You might be able to open the PNG file in
  another application, like Photoshop image processing.

  --
  Linda Rathgeber [PVII] * Adobe Community Expert-Fireworks *.
  --------------------------------------------------------------
  http://www.Projectseven.com
  Fireworks Newsgroup: news://forums.projectseven.com/fireworks/
  CSS newsgroup: news://forums.projectseven.com/css/
  Design aid kits: http://www.webdevbiz.com/pwf/index.cfm
  --------------------------------------------------------------