cannot open the mouse settings in the control panel after the update

Similar Questions

• Cannot open the updates that have been downloaded.

  I downloaded a file manager. I have to update to windows 8.1 but when I checked the updates, I downloaded it but it says

  the updates have been downloaded, but could not be opened (8018830f)

  kindly help me in this case and if you know a good manager who can access phone data please let me know. Thank you

  (8018830f)

  Assuming it's a Windows Phone 8, not a computer of Windows 8, see next page.

• Cannot open option programs and features in Control Panel configuration, as well as Windows Defender.

  Original title: programs and features.

  The part programs and features of my Control Panel has been disabled. How can I obtain a permit? My Windows Defender is not as open. Is it possible to use Windows Defender to disable programs and features. I could do this for me.

  I have not tried to use the programs and features for months.  I get a message that says that your system administrator has disabled P & F. I get the same message when I try all the options on the left screen. I am the administrator.

  Thanks for any help you can give me...

  Hello

  
  1. what exactly happens when you try to open windows defender or programs and features in Control Panel?
  2 How long have you been faced with this problem?
  3. you are the administrator of the computer?
  4. have you been able to open the programs and features option or defender of windows without any problems earlier?
  Please provide more information. This will help us assist you better. It is not possible to disable the windows Defender Control Panel.
   
  You can try the steps below and check if this help to allow programs and features.
  a. click the Start button, type gpedit.msc and press ENTER.
  (b) in the left pane, click User Configuration, Administrative Templates, control panelandprograms.
  c. double-click on the page of 'Programs and features' Hide.
  d. now selectnadou E option and click the ok button.
  e. close the Group Policy window.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CS4 Web Standard: upgrade of control; Cannot open the Dw & Fw

  I got a new pc 3 weeks; transferred * CS4, then the launch of Dw and Fw, there is a message (as shown below) box for example

  the license is on an experimental basis. But I misplaced the MX2004 license and today the trial expires, and I can't open/launch Dw and Fw.

  I have reinstall CS4 (DVD), but still cannot open the Dw & Fw

  I am the user ONLY of MX or CS and the current/new * pc is my 3rd or 4th CS4 (DVD set) bought in 2008.

  (*) - The previous and new pc works on Windows 10.

  -It could have been errors during the transfers/back up between the discs (unfortunately, given in the external hard have)
  removed)

  I chat with adobe support and they asked me to go on the forums; That's why I appreciate for any assistance given.

  Finally, I am a user of Fw & Dw base; Use them only for image and text content, and for now, I really need to change content

  and sent to a new site.

  Thank you.

  

  

  The only way to get the programs to work is to enter the serial number of the previous product. Did you register your original software with Macromedia? If so, you should be able to get your serial number by logging in to your Adobe account. If this isn't the case, you're out of luck.

• Cannot open the application "iTunes" because another user is open.

  I recently bought a new computer with vista. Installed iTunes on this computer and found that there is a problem between the two profiles on the computer. I run iTunes on my profile - but whenever my wife profile is active we are getting consistent error messages indicating "cannot open the application"iTunes"as another user, he has opened." Ask the other user to quit the application and try again.

  I need to keep itunes open in my profile - and anyway, why are they bent them in two profiles in Vista... we never had this problem under XP.
  I asked Apple for advice, and they suggested to install itunes in the second profile... which I did and said to reinstall/repair...which is not the goal... Apple then told me to contact Microsoft support as he would have to do with the admin files...
  Any advice pls.
  Thank you

  Find the Itunes.exe in the Itunes folder in Program Files.  Right click on the .exe / Properties / compatibility, look down at the bottom of this page for the 'privilege level' and check the box that says "change settings for all users.  In the heartbeat window according to the box that says "run this program as an administrator".  This can only solve your problem if you can both run under the same user name.

  When you run a program as an administrator you should get a quick UAC (unless maybe you have turned off UAC?

  To see the file extensions, you may need to go into Control Panel / folder Options / discovers, there you can uncheck "hide known file type.

• IE cannot open the operation of the website abandoned when I try to log on to Facebook

  I have windows vista and when I log on facebook IE says that it cannot open the operation of the website abandoned. Why does do that

  Hello

  ·         What Web browser do you use?

  ·         This problem is limited to Facebook?

  The article says that the problem does not occur in Internet Explorer 8 and provided also for Internet Explorer 7 troubleshooting steps.

  http://support.Microsoft.com/kb/927917

  You can also follow the steps/methods of the link below and check if the problem persists.
  
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Cannot open the safari link after installing the iOS 9.3

  Cannot open the safari link after installing the iOS 9.3

  This is a common problem and there is currently no permanent solution yet.

  Try turning off JavaScript under settings - Safari - Advanced.

  I think that apple will figure things out soon.

• iPod touch will not got to some Web sites - "Safari cannot open the page because the network connection has been lost."

  Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:

  S afari cannot open the page because the network connection has been lost.

  The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.

  No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.

  I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.

  Thank you!

  Not "no matter where I am," means, it happens with all networks?

  If so:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Vision Builder HAVE: (Hex 0xFFFA960C) cannot open the record of inspection.

  I HAV built an inspection in the generator of vision for automated inspection (the code, the image and inspection is provided in the attachment)
  but my program cannot open the inspection is to launch an error: error-354804 occurred in VBAI Interface - open Inspection.vi.

  I am using the NI 1742 smart camera and run the program on the remote target

  I don't get the reason for this error.

  If smbdy can solve... Please...

  I think the problem is that the path you specify is invalid for a goal of RT. On the RT, the 'path' should just be the name of the inspection. If you look at help for the VI open Inspection, it says to use the get target Inpections VI to see what paths for all controls are... sometimes the path is a name of numbers subsequent, though it may not be what you think.

  Hope this helps,

  Brad

• XP, Windows Media Player tries to open each file and responds with, "windows media player cannot open the file.

  I can't even go to open, ' Change / Remove Programs "Control Panel. Same shortcuts on my desktop are not open without WMP trying to open the first file. Why is it in the middle of everything? How can I disable WMP or stop trying to open all files, media files that are not same? There version of WMP 9, but when I try to download a newer version, it won't work because WMP keeps popping up, saying: it cannot open the file.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article mentioned below and check if the problem persists.

  Windows Media Player invalid file Error Message Format

  Hope this information helps.

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• PpsPermission cannot open the path

  I have a problem when my application tries to access to the phone.

  The app show this debug info:

  [UI] {W} [10:20:09.463 06/05/15] [22128 KB] PpsPermission cannot open the path: "/ pps/services/phone/private/calls/.all?delta".
  [UI] {W} [10:20:09.490 06/05/15] [22144 KB] PpsPermission cannot open the path: "/ pps/services/phone/protected/calls/.all?delta".
  [UI] {W} [10:20:09.601 06/05/15] [22144 KB] PpsPermission cannot open the path: "/ pps/services/phone/public/calls/.all?delta".
  [UI] {D} [10:20:09.623 06/05/15] [22128 KB] failed to open object pps phone
  [UI] {W} [10:20:09.643 06/05/15] [22144 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:09.660 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:09.679 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/public/control
  [UI] {W} [10:20:09.698 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:09.716 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:09.735 06/05/15] [22128 KB] PpsControl cannot open the path: / pps/services/phone/public/control
  [UI] {W} [10:20:09.948 06/05/15] [24080 KB] PpsPermission cannot open the path: "/ pps/services/phone/private/calls/.all?delta".
  [UI] {W} [10:20:10.069 06/05/15] [24080 KB] PpsPermission cannot open the path: "/ pps/services/phone/protected/calls/.all?delta".
  [UI] {W} [10:20:10.094 06/05/15] [24080 KB] PpsPermission cannot open the path: "/ pps/services/phone/public/calls/.all?delta".
  [UI] {D} [10:20:10.122 06/05/15] [24080 KB] failed to open object pps phone
  [UI] {W} [10:20:10.146 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:10.170 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:10.198 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/public/control
  [UI] {W} [10:20:10.225 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/private/control
  [UI] {W} [10:20:10.339 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/protected/control
  [UI] {W} [10:20:10.371 06/05/15] [24080 KB] PpsControl cannot open the path: / pps/services/phone/public/control

  Someone had this problem?

  ignore the warnings, it's just the usual journal spam

• Cannot open the catalog

  I am unable to use Organizer in elements or Prime Minister. An error in says: "cannot open the catalog. An internal program error has occurred. »

  I tried to reinstall and update but the problem persists. I use the Version 12 on Windows 8.1.

  I found similar issues in the community, but they all seem to be unanswered. Help to solve this problem would be highly appreciated.

  Thank you.

  Colin

  Hello again

  By trail and error, I found a solution to 99%.

  Right-click on the desktop, the icon of elements.

  Select Troubleshoot Compatibility.

  Select troubleshoot program

  Select a problem (I used the other)

  Select the Version of Windows (Windows 8 for me)

  Select the Test program

  If it works, which he did in my case, save the settings.

  This seems to have solved my problem, except that I now get an extra screen at the opening of the elements to allow the program to make changes to my computer. I can live with that.

  When I get time I will check if there is any Adobe or updates to Windows that will make this unnecessary step.

  I hope this helps other people with the same problem.

  Thanks for responding and making suggestions.

  Colin

• Cannot open the filter saved in AE as a file filter DM says PP. displacement map is missing.

  Cannot open the filter saved in AE as a file filter DM says PP. displacement map is missing. Also get a message that the AE file format does not match the sequence. Ask me to retain the existing settings or sequence - or track work. Haven't tried dynamic link as well - no chance. I'm a noob, so might be something real simple.

  Thank you

  Other features such as text, or shape layer, that do not exist in PrPro, or effects can be translated when you export your AE project as PrPro project. Similar things happen when you replace a clip (or a group of clips) by PrPro chronology by dynamically linked composition AE: titles, quite a few effects and transitions are not translated (at least correctly).

  However, dynamically linked composition AE is considered a composite PrPro. Therefore, there should be no problem seeing the result of applying any effect within a dynamically linked composition in the chronology of PrPro. If you have some difficulties with it, please provide a detailed explanation of what you want to achieve and what you are doing exactly.