PpsPermission cannot open the path

Similar Questions

• Help! MicrosoftOffice 2011 cannot open the files after the recent update

  After the recent update (security 2015-006, Mac OS 10.10.5, Yosemite), I can longer open all files in Microsoft Excel or Word.

  When I tried to open the files in the "Open recent" list, Excel reports "Excel cannot open the workbook. The file name or path contains invalid characters (for example, /). "Same error message appears when I go into the folder and open the file in Excel.

  When I tried to open an existing file of the word, he pointed out that "this is not a valid file name.

  PS: Please do not suggest you use everything as your other favorite programs.

  Click the folder just below the recent and see if documents are on my Mac. Additionally, click on a reader-Documents-then the file name and see if the same thing happens. I downloaded the update of security on the App Store and have no problem. Also, in your menu bar, go to help in the Office applications and updates. An Office 2016 update was released last Friday, December 11.

• Vision Builder HAVE: (Hex 0xFFFA960C) cannot open the record of inspection.

  I HAV built an inspection in the generator of vision for automated inspection (the code, the image and inspection is provided in the attachment)
  but my program cannot open the inspection is to launch an error: error-354804 occurred in VBAI Interface - open Inspection.vi.

  I am using the NI 1742 smart camera and run the program on the remote target

  I don't get the reason for this error.

  If smbdy can solve... Please...

  I think the problem is that the path you specify is invalid for a goal of RT. On the RT, the 'path' should just be the name of the inspection. If you look at help for the VI open Inspection, it says to use the get target Inpections VI to see what paths for all controls are... sometimes the path is a name of numbers subsequent, though it may not be what you think.

  Hope this helps,

  Brad

• ipconfig\registerdns... responding system cannot find the path specified__on my windows vista

  When I type the command 'ipconfig\registerdns' and all the commands ipconfig, and then press enter I always get "the system cannot find the path specified" I need help...

  First, you must open the command prompt by clicking on the icon and clicking Run as administrator (if not, you do not have access).

  Second, the command should read ipconfig/registerdns (note the space and the fact that the slash is going the other way).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Every time I try to open a pdf document that is located on a server of our company (so not on my laptop), the drive still shows error. Cannot open the document. Only in EAC I copy the document to my local PC, I can read without problem. Server is mapped

  Every time I try to open a pdf document that is located on a server or in our company (so not on my laptop), reador always shows error. Cannot open the document. Just in case I have copy the document into my local PV, I can read without problem. Server is mapped in my FileExplorer (Win7). So boring and big bug I think.

  Massage of error: "there was an error opening this document. The network path was not found.

  Hi tobiask53385798,

  Could you please try to disable Protected Mode under ' Edit > preferences > (protection) "and see if that helps.

  Let me know.

  Kind regards

  Ana Maria

• Cannot open the file Windows XP Proffesional.vmdk

  I can not power

  on cuz VM of this error, cannot open the file path ' ' Wnidows XP Professional.vmdk, the system does not give especified. Someone knows how to fix this? Help me pls.

  From what I have read it could be a corrupt vmdk file, so I'll share my for you guys.

  None of the binary scopes, "Windows XP Professional - s001.vmdk ' via ' Windows XP Professional - s305.vmdk", lack or size of 0 bytes?

• ORA-07391: sftopn: fopen error, cannot open the text file.

  Hello
  
  The last 3 days, we get the error in the alert below log.
  
  [ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [27091] [] [] [], [], []]
  ORA-27091: unable to queue I/O
  ORA-27072: IO file error
  
  I check as the same partners to it in metalink I found permission to check the directory solution. (DOC ID367619.1)
  I got permission from ORACLE_HOME\dbs $ to 777, but still m making the same mistake.
  
  also I try to recreate spfile so that I try to create pfile first
  
  create pfile from spfile
  
  I get the error below.
  
  ORA-07391: sftopn: fopen error, cannot open the text file.
  
  ls - lrt sp * in the below output shows $ORACLE_HOME
  
  -rwxrwxrwx 1 ora10g 3584 20 September dba10 05:42 < SID > spfile .ora
  
  Help, please.
  
  Thanks in advance

  user8757749 wrote:
  The output of ls - lrt is in the path $ORACLE_HOME\dbs only

  We also have the database version 10.2.0.4 that the spfile even uses everyday cold backup of the database.

  also, I put the 777 permission to the file.

  OK, I guess there will be corruption of the SPFILE as if edited manually or in any other cases too.

  You have a backup of SPFILE? backup of the file PFILE or?

  then starting using this SPFILE, if any backup then start with PFILE and then create SPFILE from PFILE.

  Otherwise, you can copy the contnets of the parameters of the alert log file initialization and paste in the editor and the instance of starutp.

  These are the options.

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• ID but cannot open the phone

  معرف ولكن لا يمكن فتح الهاتف

  I know that ID but cannot open the phone

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• 9.1 Safari cannot open the page after el capitan 10.11.4 updated updated

  have an imac (retina 5 k, 27 ", end of 2014)

  4 GHz of processor intel core i7

  8 GB 1600 Mhz DDR3

  1 TB of flash storage

  running Safari 9.1 (11601.5.17.1)

  Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.

  Journal of the console after repeated attempts-

  

  appreciated all help to solve them.

  Go step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

• Receive "Safari cannot open the page. Too many redirects occurred trying to open google

  On a Mac OS X 10.7, when I try and access google/mail I get the message: "Safari cannot open the page. Too many redirects occurred during open yo... Any ideas?

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Then exit then restart Safari to test.

  If you see the same message, the redirects may be due to malicious software.

  You can download here free malware removal utility > https://www.malwarebytes.org/

  Or, if you would rather download MalwareBytes, you follow the instructions in the malware removal manually here > remove the unwanted advertising software that shows ads advertising and graphics on your Mac

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html