Cannot open the shared docs and 6 docs that I was working on went

Similar Questions

• Cannot open the control panel and workstation - "Windows Explorer has stopped working"

  Original title - I can't open my computer or control panel.

  I try to open my computer or control panel so I can uninstall something I think that may have caused a problem. When I try to do so, a window opens saying "Windows Explorer has stopped working". I don't know what to do. I think it was some game, I installed recently which caused this.

  Restart your computer in safe mode by pressing F8 just before windows logo appears after intervention by the bios. And see if you can open my computer or control for safe mode. If you then uninstall the program/game where you doubt. also run msconfig and remove startup programs that you do not use frequently and do not trust. Also if you have recently added a toolbar or of any custom theme and then disable it. then reboot in normal mode and see if the problem persists. It will be useful.

  Good luck!

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Part removed from the registry, cannot open the .exe, .lnk and cannot access the system restore

  Following the advice on a Wikipedia page to remove a virus 'active security scan', I accidentally deleted a potion of my registry (software?)  Now I can't access any .exe, .lnk, files etc.  I get the message "windows cannot open this file", and then me accesses a page with no software suggested to open the file.  I tried the system restore, but get the same message when I try to open the system restore program.  Any suggestions?

  Jay,
  You should read through this article, because it addresses a similar situation.  Let us know if it helps.
  Recover corrupted regitry

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have win 7 Ultimate edition and windows cannot open the hidden files and folders.

  I have win 7 ultimate, windows cannot open hidden files and folders.plz give me the solution

  Hello

  Please see the thread below for a possible solution (applicable to Windows 7):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/show-hidden-files-and-folders-option-not-working/4d6d7b29-8382-4798-AB43-49ccbfd109bf

• Install updates problems, cannot open the cbs.log and corrupted files

  My laptop is having a lot of problems now may not install as 16 important updates, it continues to display the 800700B error code. Then I run sfc/scannow, and then he said he finds corrupted files, but could not resolve, so I tried to open the cbs.log newspaper to for more details but he said that the access was denied (no matter in many ways, I have tried, it won't let me access it).
  So please help me to solve these problems, I don't know what the problem principal here, please help me!

  How about an error of 8007000 b? See http://support.microsoft.com/kb/956699 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LaserJet pro 1415: cannot open the cartridge door and prints have red lines on them

  First problem was the red lines on the printed pages, now I can't open the cartridge door

  Just to close the loop, we decided to force the drawer open, because the printer was unusable anyway even if we have something broken. With a lot of pressure, the drawer open. We then tried to print something and a message there is a paper jam.  We opened the back door to clear paper jam and off broke a spring and a broken then only plastic parts. We cleared the jam and thought that the broken part just came to the door but was clearing of the works.  Then we printed out a page and everything worked fine.  If the door does not close completely because it is missing a piece, so what? The printer works fine. Thanks for trying to help.

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• HP Photosmart C6300: Photomsart C6300 HP cannot open the Bluetooth Menu and cannot install CD as ive got no CD player

  So I wanted to install my wireless printer and connected to the internet just fine. However, aparantly, you must install it via the CD that is given but my laptop is not a CD ROM drive so I can't do that. Is anyway to install it without using the CD?

  Second, I tried to set up via Bluetooth and I go to settings and scroll down to the "Bluetooth Menu" and when I click OK, it opens all open all the other menus, for example, tools, Netowork, etc..

  What continues? :/

  I do not have any connected USB or Ethernet cables because I read somewhere that it may not allow you to open the Bluetooth Menu.

  Hello

  For the second question: it requires HP USB Bluetooth adapter, you bought this part mentioned on his page:

  http://support.HP.com/us-en/document/c01490922

  And for the first question, if please download the suite of folloqing and install on your computer:

  http://ftp.HP.com/pub/softlib/software13/COL30126/MP-109713-3/PS_AIO_04_C6300_Net_Full_Win_WW_140_408-5.exe

  Kind regards.

• Equium A60-692 - cannot open the start menu and keyboard problem

  I have a problem starting my laptop A60-692 and I'm not near the points of service.

  When I push the power button the screen goes through its startup routine gives her marching band welcome charge to the top of my desk.
  But when I click on the start only the start window flashes for a split sec and remains standing. If I press the windows key on the keyboard I can then click on the start and the start window appears on the screen.

  However if I open a program like note book or internet explorer, the keyboard will not and only gives a Bell sound when I use the keyboard. If I click Start, then shut down and click on restart the laptop turns off and then restart everything works fine!

  It's very boring and tedious. I'struggled with this for a long time, although it was not like that when new.
  Everyone had the same problem or have any advice to give?
  I would be very grateful!

  Concerning

  Andrew

  Hello

  Believe me it is not easy to say what the problem is here.
  I would like to know where the mouse you are using. Use you touch pad s notebook or external mouse?
  If you use the s key to laptop please disable it with FN + F9 and test with an external mouse only.

  What about the response of the keyboard? You can also try to test with external keyboard only. Only in this way you can see if this issue has something to do with the internal keyboard.
  Please do some testing to see if this issues can be related to defective portable equipment.

• Cannot open the Webcam HP and HP TouchSmart Web

  Original title: hp touch smart...

  Daniel every time I try to use my webcam or Web of hp touchsmart, it will pop up and then goes away? I don't understand what is happening...

  Hello

  1. What is the number of brand and model of the computer?
  2 did the webcam very well earlier?

  I suggest you try last download and install driver and software for Webcam HP and HP TouchSmart Web respectively on the manufacturer's Web site. And check if it helps.

  To download the latest drivers for Webcam HP see link.

  Support for drivers &
  http://WWW8.HP.com/us/en/support-drivers.html

  HP TouchSmart canvas see the link to download and install the latest software.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-90552-1

  Let us know if it helps.

• Cannot open the Canon 1200D Raw files in PES 11 [was: Raw PSE Converter]

  I have 11 PSE (on Windows 7) happily converting my raw files from the Canon 700 d. I got some CR2 files in a Canon 1200D to change, but my software will not deal with them. What can I do?

  Pat

  Devices supported by Adobe Camera Raw

  Camera Raw plugin and Adobe application compatibility

  The 1200D was first supported in camera Raw 8.4 that is only compatible with PSE 12 and following. Not PSE11 which is only compatible up to 7.4 Raw.

  Options:

  1. Upgrade to PSE14, or
  2. Free option: download the free Adobe DNG converter, convert all 1200D to DNG Raw files, then change the DNG files in PSE11. An extra step for you, but no extra costs.
     Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC
     Camera Raw: How to use Adobe DNG Converter - YouTube

• Error generating content. Cannot open the InDesign file.

  Hey all -

  In the import of an article on a folio, I just got this error:

  "Content generation error.

  Cannot open the InDesign file. Please confirm that the file can be opened in InDesign.

  The file is opened now in InDesign. I can close and reopen without error.

  I tried to save again article in a new file. No help.

  I tried to create a new folio and bring the article there. No help.

  All links are good. It is a simple file with images, a pane scroll and buttons that link to other articles.

  Anyone experience this problem? All solutions?

  Thank you!

  as suggested above, Amy if you download items from a network drive, move your files to local computer HD and download from there. Download the data to a network drive is known to cause unpredictable errors

• I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer.

  I can see other computers on a network of peer to peer windows XP but cannot access their shared files and the shared printer. The computers are connected by a switch, fixed IP addresses that are correctly configured and point to a DNS server outside the network. When I try to open the icon for one of the computers, he asked for credentials. I try to type the user name for the computer that is sharing the resource and the password. It is the user account whose computer is loged on and belongs to the Administrators group. for example: user name (Computer1\username) password (password). It does not work. The Windows Firewall is disabled on all computers. It worked well there 2 days. I can't find anything wrong with the network settings. Does anyone have a solution? Thank you.

  If the portion of the machine has activated - Simple file sharing (i.e. it is XP Home or it is XP Pro with Simple (default) file sharing) - while all file sharing connections authenticate as user 'guest '.  It will not matter what username / password you provide, it will attempt to authenticate as 'guest '.  If the guest user has received a password or the guest account is not active, you will experience the symptoms you describe.

  If the serving machine running XP Pro and Simple file sharing is disabled, then you should be able to connect by specifying the user as computer\user and the password to connect.  To turn off Simple file sharing:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  Also:
  "Description of the account in Windows XP"
    <>http://support.Microsoft.com/kb/300489 >

  HTH,
  JW

• Cannot open the filter request mission shared services

  Cannot open the filter request mission shared services, and this applies to all applications in a 9.3 production environment.
  
  It says "See the Guide Security to configure the security permissions for this application."
  
  And this message is displayed in a tab of HSS named 'built-in Apps.
  
  
  
  Can Essbase suddenly pass from the SSP in native mode security mode? What is the cause?
  
  Published by: Markus on August 9, 2011 01:23

  Have you tried the reinstatement of one of applications with shared services, go to the INJURED, do a right-click on the application and select Register.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I may have inadvertently downloaded Firefox 5 instead of 4 and cannot open the application because it is not supported. Can I still download Firefox 4, which I was planning to do?

  I tried to update to Firefox 3 Firefox 4. But, after completing the download and then tried to open the Firefox application, I got a message saying: "Cannot open the application"Firefox"because it is not supported on this architecture." Is it possible that I may have inadvertently downloaded Firefox 5? I do not think that my system support
  Firefox 5. I'm not a geek, so I really appreciated any help you can give me. Thank you.

  • Versions of Firefox 4 and later do not run a Mac PowerPC.
  • Firefox 4 and later requires at least OS X 10.5 and an Intel Mac.
  • http://www.Mozilla.com/Firefox/5.0/system-requirements/

  For a non-official Firefox 4 compatible version (TenFourFox) which works on Mac PowerPC with OS X 10.4.11 or OS X 10.5.8, you can consult:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x (Mac OS X 10.4 and later versions) can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html