Cannot perform the last update

Similar Questions

• Cannot perform the iTunes update

  Hello
  Try to update iTunes, I received the message (attached, in German):

  "There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »

  What can I do?

  Thanks in advance for the help.

  Best regards, Alpe1

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• Cannot perform the automatic update of Windows via IE

  After the new installation of Windows XP Pro, Windows Update site reports "the website has encountered a problem and cannot display the page you are trying to display" trying to Express/custom install. Tried restarting, cleaning cookies, but nothing works.

  Thank you

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  http://support.Microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
  http://support.Microsoft.com/kb/958053

  Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
  http://support.Microsoft.com/kb/914226
  Windows Update has encountered an error and cannot display the requested page.
  In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page.

• Cannot download the last update on photoshop cs6 extended autonomous

  Cannot download the updated photoshop cs6

  Please follow the steps in the link below:

  https://helpx.Adobe.com/Photoshop/KB/update-Photoshop-CS6-1304-131x.html

  ~ UL

• Cannot perform the insert/update on the form of tables, due to the dynamic action

  Hi all
  
  I created a dynamic action that calculates multiple cells in a table.
  
  This feature works well, when I change the value of the associated cell then the computed value is changed by the dynamic action.
  
  But I am not able to insert or update the line in a table when the dynamic action is enabled. When I put the condition 'Never', then the line is inserted or updated without any problems.
  
  All guess where is the problem?
  
  Apex version: 4.1.1.00.23
  
  Jiri

  Nina wrote:

  I don't know why the 123,40 value (or other) is set to the next item in line (f09, fsc, etc.)
  >

  What is hidden and generated Apex elements are always included in the last cell (td) of the line. Thus, it has nothing to do with the next item, only the last cell.
  If you see the last cell of the 888 Page you will see probably the same type = "hidden" entries here also.

  Your problem is not related to the HTML fragment to the last cell in the row showing all those extra items, it's somewhere else.

  Oh, here comes the jQuery selector:

  var clickedRow = $(this.triggeringElement).closest('tr');
  
  $(clickedRow).children('td[headers="SAL"]').find("input").val(myCalculatedTotal);
  

  SAL, COMM, w/e. here you will find the TD with headers = "COMM" and all the input fields and the value of all the entries in total calculated. Your selection is not precise enough in this case.
  So, target the specific entry.
  With the code example:

  
  Comm
  
  
  
  
  
  
  

  change the switch on

  $(clickedRow).children('td[headers="SAL"]').find('input[name="f08"]').val(myCalculatedTotal);
  

• Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not either of these browsers use

  Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not use either of these browsers. I chatted with Comcast and they are the ones who asked me to try to gain access to other browsers. And, as noted, I managed. Only my opening my email to Comcast.net inhibits the Firefox, the browser that I use on a regular basis because of this problem I can't use Firefox.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Cannot open google automatically when you click on the button new tab since the last update of Firefox.

  I was able to do so until the last update... I spent through the process several times since, but without success... including adding the complete URL, etc.. The only suggestion so far is that 1 of my modules could be the cause, but I have still the same as before (they are edge Adblock, S3. Google Translator and yet another Smooth Scrolling)... it's frustrating!... and I'd love some help please... Thank you.

  Hi, for reasons of security, 41 of Firefox, you must use an add-on like tab override (browser.newtab.url replacement), to make changes to the page tab.

  Once installed, open the Add-ons (Ctrl + Shift + A) Manager > Extensions, and then look for the new tab override and click Options to set your preference.

  Note, if you want only the new tab to be the same as your home page, you can use the Add on new tab homepage instead.

  You will then need to restart Firefox for all changes to take effect.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Since the last update, cannot navigate a site by typing in the address bar

  Since the last update/installation of Firefox, is no longer allows navigation via typing in the address bar. Even if I type the whole address and press on enter or click on the "go to" arrow, nothing happens. I navigate to a website by Google it and following their clickable links.

  I am not n00b - clearly an error with the latest version, or an interaction/preset that gets in the way. I would appreciate ideas.

  Help articles for Firefox on the latest state of the version:
  "Web search in the address bar - when you type in the address bar and press return, Firefox takes you in search results by using the search provider selected in the search bar."

  Uh, not Firefox. Your address bar takes me precisely nowhere!

  See you soon.

  OK, I have a follow-up recommends disabling half of the addons and restart the browser - if the problem disable the other half and continue until you have reduced the guilty...

• cannot print without a box ' save print out put as "coming, what is new since the last update of firefox

  Since the last update of firefox, which has been really helpful for blocking popup, I can't print anything for example an email or bank account information without a box entitled 'save the output as' with lines of file information usual name and location. I don't want to do and have never had to do before, also when I close the box a "Printing error" box appears and I can't print.

  The setting you make must persist until you change it again. The "default" is the last used printer.

• Cannot open disk sparsebundle since the last update image

  Since the last update of El Capitan (10.11.5) I can not open a disk sparsebundle image. A message says "incompatible type with the socket protocol. Does anyone have an idea to access my data on this disk image?

  Thank you

  Does anyone have an idea?

  I try to mount a drive another image and it failed for the same reason...

• Cannot synchronize calendar Outlook with Iphone6s after the last update IOS9.2

  I was able to sync my desktop to my iphone calendar before the last update 9.20.  I tried to sync the calendar several times but it doesn't work!

  Help, please?

  I have a similar problem, the timing of my 6s running iOS 9.2 (13 c 75) with my laptop 10 Windows running Outlook 2010 standalone (no exchange server) and sync via iTunes.  Individual appointments synchronize properly, but recurring appointments will not be synchronized in both directions - I can enter on Outlook or on the 6s calendar, and it never syncs to the other device.  This is a serious issue!

• Cannot open the e-mail since the last update on 09/11/11

  This update came just after the new features added to the email. I wonder is there a compatibility issue? The last update was a security update. Is it blocks something perhaps?

  Hello

   

  1. what email program are you using?

  2. you receive an error message when the issue occurs?

  3. you are not able to open all e-mail?

  4. What is the number of KB update?

  Check the following link to see the updates have been installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Answer us with more information so that we can better help you.

  Thank you.

• cannot change directories since the last update

  problem, the vulnerabilities of windows on my software now since the last update last night. any program, try to change directory and get an error code that the program ended unexpectedly.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  This is the recovery and repair of Vista Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Subject: healthreport, about: preferences, about: newtab all give the same error message: the URL is invalid and cannot be loaded. All this since the last update

  Whenever I select all: preferences? entrypoint = menubar #sync, about: healthreport, about: preferences, about: newtab, I get the same error message: "the URL is invalid and impossible to load. All this since the last update tot 50.0 FF. I have tried refreshing Firefox, but to no avail. Help, please. Best regards, mauver

  Hi FredMcD,

  You are the hero of the day. Well, everything seems to work again with the exception of my best websites (which should open when I click on new-tab). But it's only a minor problem and I can easily restore that manually.

  Thanks for your help,

  Mauver

• After the last update ps ps cc cannot print more.

  I run PS CC on a Windows 7 PC with a Canon Pixma printer. After the last update I did yesterday the ps print menu works on something undefined and closed the application immediately. Y at - it an idea to get out of this situation of lock?

  Update are you referring?

  Looks like you're just crashing in the printer driver, look for the drivers updated with Canon.