Cannot perform the iTunes update
Hello
Try to update iTunes, I received the message (attached, in German):
"There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »
What can I do?
Thanks in advance for the help.
Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.
TT2
Tags: iTunes
Similar Questions
-
Cannot perform the automatic update of Windows via IE
After the new installation of Windows XP Pro, Windows Update site reports "the website has encountered a problem and cannot display the page you are trying to display" trying to Express/custom install. Tried restarting, cleaning cookies, but nothing works.
Thank you
Suggestions:
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/http://support.Microsoft.com/kb/2497281
You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
http://support.Microsoft.com/kb/958053Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
http://support.Microsoft.com/kb/914226
Windows Update has encountered an error and cannot display the requested page.
In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page. -
Cannot perform the insert/update on the form of tables, due to the dynamic action
Hi all
I created a dynamic action that calculates multiple cells in a table.
This feature works well, when I change the value of the associated cell then the computed value is changed by the dynamic action.
But I am not able to insert or update the line in a table when the dynamic action is enabled. When I put the condition 'Never', then the line is inserted or updated without any problems.
All guess where is the problem?
Apex version: 4.1.1.00.23
JiriNina wrote:
I don't know why the 123,40 value (or other) is set to the next item in line (f09, fsc, etc.)
>What is hidden and generated Apex elements are always included in the last cell (td) of the line. Thus, it has nothing to do with the next item, only the last cell.
If you see the last cell of the 888 Page you will see probably the same type = "hidden" entries here also.Your problem is not related to the HTML fragment to the last cell in the row showing all those extra items, it's somewhere else.
Oh, here comes the jQuery selector:
var clickedRow = $(this.triggeringElement).closest('tr'); $(clickedRow).children('td[headers="SAL"]').find("input").val(myCalculatedTotal);
SAL, COMM, w/e. here you will find the TD with headers = "COMM" and all the input fields and the value of all the entries in total calculated. Your selection is not precise enough in this case.
So, target the specific entry.
With the code example:change the switch on
$(clickedRow).children('td[headers="SAL"]').find('input[name="f08"]').val(myCalculatedTotal);
-
Cannot perform the last update
I get this error after a while. Any help?
Hi Alexander,.
Yes, absolutely!
Please, try the following steps:
- Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Kind regards
Sheena
-
Others become the iTunes update server message connection failed?
Others become the iTunes update server message connection failed?
My iPad has the logo of iTunes with the load icon and cannot update or restore on computer at home.
All internet connections are very good.
I'm having the same problem I tried 3 cables of computers 4 and my ipad won't restore or update.
-
Since the Itunes update my video home tab disappeared.
Since the Itunes update for Mac my home video tab disappeared from Itunes and cannot be restored. Videos that will record video home show in AppleTV under Videos at home but don't show in my Itunes software at all. The result is: I can't remove them from projection on Apple tv once looked. I have to go to the videos folder manually to remove the file, but it still shows under videos on Apple TV. Of course, if I click on it then he can't play the file is not available!
Why the category of home video is not displayed in itunes? I tried all sorts of things but am nowhere. I can't even stop Itunes to place the files in the folder of the home video, if I delete the folder it just creates another.
I removed itunes and reinstalled, even did a factory reset on Apple tv, but nothing helps.
Hope someone can help please,
Thank you
Karen
Revealing the videos section of the library requires that you discover a menu edit hidden that you have no reason to suspect exists and then display the thing you knew was hidden.
The word change to the right of the library appears if you move your cursor to the position where it appears.
Click on it to bring up this menu:
And then check the videos:
You can then click done and finally click on videos to see what it contains.
TT2
-
cannot activate the automatic updates on my laptop.
original title: cannot activate the automatic updates on my laptop. Were follwoed instructions Update window without success. Help!
Automatic message updates consistent warning box are not on. Tried several times to move away, but still says that the site has encountered a problem. Now completely blocked
Hello
-Did you change on your computer before the show?
-Did you have performed the steps described in this article?
-What Service Pack is installed on your Windows XP computer?
-Have you tried "fix it" of this article?I suggest you to test the issue in a new user account.
-
Re: Windows 8.1 - Windows cannot find the new updates
Hello
I want to update some updates of Windows 8, but it says that Windows cannot find the new updates, problem code 80070003. IM desperate, I tried many sites and forums but nothing helps!
Thanks for the replies
Hello
Can you please tell us which laptop model you have and what operating system are you using?
If I understand you right, you have improved your Win8.1 machine and now you have problems to install the Windows updates.
Is this correct? -
error 0x8024d007 cannot load the microsoft update
error 0x8024d007 cannot load the microsoft update
http://support.Microsoft.com/kb/956701
The above should help
-
Original title: loading with a password required
I'm trying to open a zip via windows 7. Same error occurs on windows xp. There is a "compressed (zipped) folders error" error Windows cannot perform the extraction. The destination file could not be created.
I recently got 8 deleted window and window 7 set in... I've never had a problem before
Hello
- Using default Windows 7 application or any other 3rd party application?
- What type of file you are trying to open?
- You try to extract the zipped file documents? If so where are you trying to save?
I suggest you try these methods and check the status of the issue.
Method 1
Try using Windows to extract the zipped files
http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files
Method 2
Perform the check and the boot if the problem persists.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode. -
Cannot perform the operation while the host belongs to a Windows domain.
Hello
I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;
Cannot perform the operation while the host belongs to a Windows domain.
The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.
Any advice would be appreciated
Thank you
M
FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.
-
Error #3200: Cannot perform the operation on the window closed.
Hello
I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error
Error #3200: Cannot perform the operation on the window closed.
When I test as a stand-alone desktop application, it works very well.
I tried it with a window pane mxml, as well as with the code, such as:
var newWindow:Window = new Window()
newWindow.title = "new window";
newWindow.width = 200;
newWindow.height = 200;
newWindow.open (true);
I use a WindowedApplication.
Flex 3.5
2.7 AIR
Flash Builder 4.5 (do not use the Extension Builder)
Thank you!
Jeff.
I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.
Here's how:
victory: MyCustomWindowType = new MyCustomWindowType;
win.showStatusBar = false;
Win.type = CSXSWindowType.MODAL_DIALOG;
Win.Open ();
You probably want to create a component based on the window.
In addition, you must use CSXSWindowedApplication. It is possible that it took for this...
-
Cannot perform the update Windows with the error code A 8024, 000
Original title: error code 8024A 000, does that mean?
I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?
Hi Anthony,
1 are you facing this problem with any particular Windows update?
2. What are the troubleshooting steps you have tried?
Please follow the links and check with the question:
Method 1:
How to reset the Windows Update components? :
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:
http://support.Microsoft.com/kb/2509997
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
I hope this helps.
-
Cannot find the iTunes on my phone app
After updating my phone, I have more the iTunes Store app?
It is an integrated, application so it cannot be deleted, but it could be hidden – if you can't find it, including through spotlight search screen, check if you have hidden it via settings > general > Restrictions > iTunes Store 'off '.
-
Why iTunes cannot access the iTunes Store on my Mac running 10.8?
My Mac is running system 10.8.5. iTunes is version 12.2.0.145. iTunes does not connect to the iTunes Store. Says I need an internet connection, which of course I and is running. Also, I can not connect to the App Store. I tried everything on the card of Apple for "Cannot connect to the App Store.", including:
Settings of Date and time incorrect (they are correct)
Without serial number (it's here)
Invalid or incorrect network preferences (everything seems fine)
Invalid or incorrect certificates (did these steps twice but not go)
Change your keyring (no blue & positives)
Help please!
Hi Jawman,
First of all, check that you have tried all the troubleshooting steps of the resource If you can not connect to the iTunes Store .
If the problem persists, here are a few more things to try:
- Update to the latest version of iTunes. 12.3.2 iTunes is compatible with OS X 10.8.5.
- If you have automatic updates enabled in iTunes, temporarily disable and check if you have incomplete downloads.
Get help using automatic downloads for purchased Apps, music and books
Resume interrupted iTunes Store downloads
- Check the payment details for the Apple ID used for purchases on the iTunes Store. To do this, you may need to re - enter your credit card expiration date and CVV code. Make sure that the billing address matches what is on your bank statement. Then click OK to save the changes.
Manage your Apple ID account information
Your identifier Apple is the account that you use to access all services Apple, App Store, Apple music, iCloud, iMessage, FaceTime, and much more. You can keep all of your information from Apple ID account to date of the Apple ID account page, such as your username, security information, name, birthday, devices and more.
Update your payment information
You can change your payment information in your Apple ID on your device or via iTunes. This payment information is the same as what you use to buy apps, music and storage iCloud.
To change your payment information to an iPhone, iPad or iPod touch, follow these steps:
- Go to settings > iCloud.
- Tap on your Apple ID. If requested, enter your Apple ID.
- Tap on the payment.
- Update your payment information and press Next.
To change your payment information to your Mac or PC, follow these steps:
- Sign in to your Apple ID account page.
- Down payment, click Add a card, or click on modify.
- Update your payment information and click Save.
You can also change your information for payment in iTunes on your Mac or PC. Get help if you want to change your payment to zero information and do not see the option or cannot select.
Take care
Maybe you are looking for
-
7520 pictures to print (4 x 6) with a wide border on the left side
I am trying to print 4 x 6 photos and they all come with a wide border on the left side of the photo. I tried also to airprint from my iphone and the same thing happens. Any suggestions? I just got the printer 2 days ago. PS. I made sure the setti
-
I'm using MacOS X 10.9.5 Mavericks on my Mac Pro mid 2012. I tried to rename a mpeg file and this resulted in a file "GZ with zipper. Someone would be kind enough to teach me on how to change this zip file in the original mpeg file. See attached pi
-
Projection KDF-50E2000 lamp problem
I replaced the projection lamp in our KDF-50E2000 after it finally bit the dust (after a warning for the few months that he was approaching the end of life). The replacement was easy, but now it will not come. I still three lights flash. I cleaned th
-
Cannot install the Steelseries Shift NSIS error software
Original title: NSIS error I try to install the software Steelseries Shift to run the new keyboard that has the world of Warcraft cataclysm, but whenever I get NSIS error and a window that says Steelseries Shift has encountered a problem and needs to
-
Hi people, My company wishes to set up a VPN between our situation in Sarajevo and Mostar. We have a Cisco 871w in Sarajevo, it is in production, and the other will also be a router Cisco in Mostar. I'm not much configuration of Cisco routers so it w