Cannot print, images are not readable after the automatic updates.

Similar Questions

• Some pages are not loading after the last update v39.

  After the updated 07/07, pages many (but not all) which worked well previously are now time and need to be recharged to load (for the first time, somehow). Started by clearing cache, then checked for malware and ended by reinstalling Firefox. I copied my profile, rather than starting from scratch with extensions (about 5 only execution).

  All of these problematic pages open correctly in Internet Explorer.

  Any ideas? Thank you very much.

  As test, please disable McAfee. It caused problems.

• Mice are not appearing after the last update of Windows 8

  After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

  Deactivation and reactivation of the mouse
  Uninstall the drivers and search for updates
  Try different mouse (2 USB, 1 green connector)
  Using the troubleshooting in the Device Manager tool, a fine of the question
  Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
  Thanks for the reply of Kevin,

  In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

  In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

  I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?

• Vista 32-bit Home Pemium does not start after the automatic update. Crashes 90% during step 3 of the configuration of update.

  Started to start for the first time today, and after half an hour of PC was still at the stage of configuration update 3 to 90%. Tried to restore the last good configuration without success. IE 9 has been installed yesterday and I rebooted a couple of times very well. I guess an automatic update downloaded all night is the problem.

  Hi Dick50,

  Try the following and check if it helps.

  Method 1: Try to start the computer in safe mode and see if you can start fine. If he is able to start try to perform a System Restore.

  System Restore: frequently asked questions

  Method 2: If it is impossible to start then try to boot into the Windows recovery environment (WinRe).

  ·         Do the Startup Repair.

  ·         Achieve the restoration of the system from the same options.

  Method 3: Once you are able to start normally, look for the updates and take note of the update that is offered.

  Just reply with the results.

• Saved passwords do not work after the automatic update

  Firefox Auto-setting to update itself on a windows 8.1 machine 35.0. But none of the saved passwords work, I see all the passwords in options-> Security-> saved passwords, but when I go on a website he fills the username, but does not have the password. If I manually enter the password that it does not offer to 'save' (so of course that he knows it's a password for this site)

  Very annoying.

  Should I just back up and reinstall 35.0 from scratch?

  I keep backups separated from all my files so I was able to restore passwords support. Apparently during the auto-update feature that something has been corrupted into logins.json or keys3.db cause no amount of re - install firefox on the existing files worked.

• Several features of Firefox do not work after the automatic update

  I got an update for firefox to 8.0 today (I had tried 8.0 beta a few weeks earlier, but returned to 7.0 after I found that some essential Add-ons didn't work). Here I have the following problems:
  Web sites - does not display correctly
  -None of my addons work, I can't get the buttons or menus to work.
  -My addons page is white with a "Loading...". "stuck. I tried waiting for 5 minutes, without change.
  -When I run firefox, my favorite bar is empty. If I delete and add new, it appears normally
  -I can not restart Firefox in safe mode
  -I can't access anything: config

  You are welcome

• I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  I just bought a DMC-TZ70 Lumix, but thw RAW images are not supported in the elements.  Is there a way to turn the problem?

  According to this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Devices supported by Camera Raw

  your camera requires the ACR 9.0 module which is only available in PSE13 after update (menu help/update).

  If you have an older version of elements, the free solution is to use the DNGconverter mentioned in the faq above with the download links.
  This stand-alone software converts all of a folder of your raw files to DNG format raw that older versions of items can read and modify.

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• How can I get my laptop to recognize my printer wireless after the automatic update?

  After the automatic update I couldn't open any program (Word, Excel, internet etc.) that I managed to resolve by restoring my laptop settings before the update. It seems to have worked until I went to use my printer. My laptop will not find my printer through devices and printers, and when I go to print a document, an error box pops up saying "Windows cannot print due to a problem with the installation of the current printer.

  Your help would be appreciated gratefully.

  You must view the windows update history and the KB updates that have been installed, that you believe that the cause of the condition.

  And also to give the brand / model of the printer and the laptop

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Images are not displayed but the cargo space

  Images are not displayed on any service.  There is no empty box with a red X in the upper left.  Any space where the image should be.  This includes backgrounds and individual images.  Even the buttons to link and change the font on this application do not appear to like what any other contours then.

  Example: Facebook blue border of the Web page do not show, nor making photos into albums.  It is the same with Internet Explorer and Mozilla.

  In windows mail images also do not load and are left with empty space.  This became annoying when links are included in the images.

  Wasn't internet Explorer or whatever it is in the same direction.  It has also affected Mozilla Firefox and it affected things offline as well.

  I actually thought things on my own by poking around.  It proved that under the "accessibility" Menu background images have been disabled for display by a person of limited view.  It had been activated, and it turned out she had a far greater effect disabling more than background.

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.