Cannot print, it freezes and turns off.

Similar Questions

• Equium A200-1V0 - freezes and turns off

  Hey!

  My girlfriend has an Equium A100-1V0 Windows 7 (first of all, he ran on Vista then one day on XP and then came a clean install of Windows 7) that freezes lately a lot.

  At first we thought it was some software, we tried disabeling everything start but it work dind; then we have disabled all microsoft services and startup items and it froze for hours (that's a lot) but we didn't not sound nothing that was not gel :) network

  Then my friend noticed that the laptop freezed only when it is plugged in and when running only on battery it does not freeze (the last battery just half an hour). Which until today when it started to turn off everything, then it turned off even when running only on battery power. I discovered that my girlfriend's sister used the laptop plugged but without the battery.

  Could that do the damage, and the problem would be the charger or the battery? the laptop Ow will stop in less than 10-15 min. sorry if my English is bad.
  Hope that respond you soon

  Hello

  It's really hard to say why it's still freezing but as Akuma maybe it's written s overheating and you must clean using a jet of compressed air. This can blow the dust from the cooling fans.

  In addition, you wrote that it freezes only when the AC/DC adapter is connected. Is this original Toshiba AC/DC adapter or not?

• My PC freezes and turns off 5 - 10 times a day

  Original title: I GET a LOT of FOGGY AND THEN SCREENS IT CRASHES SO I CAN JUST CLOSE MY PC, which is 5 to 10 TIMES a DAY PAST

  I HAVE TO SHUT MY PC DOWN SEVERAL TIMES TO GET IT TO FREEZE ON ME, IT OF A DELL, INSPIRON AN3 WEEKS AGAIN, IT IS A LEMON?

  Hi Freeway2,

  1. when the computer freezes? You receive an error message?

  2. did you of recent changes on the computer?

  Check if the problem persists in safe mode.

   

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem does not persist in safe mode then I suggest that you try to verify and boot if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Video guard freezing and turning off

  Video will not stay.

  Your video driver (and probably others) are severely dilapidated, try the updated drivers:

  http://www.nvidia.com/download/driverResults.aspx/105037/en-us

  Edit: Your Windows 10 is also not update go start > settings (gear icon) > updates and securety > windows update

  Windows key + r > winver should read: 1607 (14393.51)

  And the latest version of Skype is always recommended:
  http://www.Skype.com/go/getskype-full

• computer freezes and turns off

  my desktop computer has developed a bad habit og gel and closing down and restarting on its own.  How can I fix this please.

  Hello

  You can ask in the Windows Forum of answers corresponding to your version of Windows.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  ================================================================

  However the help, please start a new thread in the Windows Forum of correct answers

  Could be heat related - try using a small fan to blow into the air intakes to see if that helps.

  To be able to remove ALL and reinstall all the memory cards and cables (both ends where possible)-in fact
  delete and replace - do not just tight. Remove the dust bunnies and clean the vents. Make sure that the
  the fans run (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  This sounds like material so if the above does not help you then probably need the help of a real
  computer store (not the leeks and the glances at a Best Buy or other stores) or system manufacturer
  Supported.

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  Windows 7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Vista
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  XP is similar to Windows 7 and VIsta except that you would RUN in place of start - search.

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites. You must try to resolve or reduce problems - when there's that much
  material different from Bug_Check is usually involved.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet 4620 e-all-in-one stop wireless print whenever it is turned off

  My HP 4620 stop wireless print whenever it is turned off, although it is connected to the network (by the results of the test network wireless, pass & the quality of the signal is excellent).  No troubleshooting - HP Print & Scan Doctor work there is no help, I have to uninstall & reinstall the printer each time to be able to print wireless again.

  I use it on/on button to turn the printer off, don't disconnect not.

  Please help, or I need to return to the store, this is the third time!

  I also had the same issue and after a few game it seemed to have fixed so here's what I did... Hope this helps someone else.

  -My printer is connected to my wireless network.

  -On my computer that I'm connected to the printer through the IP address 192.168.1.153... (Yours may vary) in a browser

  * You can find the ip address printers on the control panel of the printers by pushing the wireless button and pushing the ok option 1, it should appear with the intensity of the signal and the ip address is at the bottom.

  -Once I was on the Printers page in my browser, I went to the tab network at the top.

  -Then to Internet Printing Protocol section (on the left in the advanced settings)

  -On my own PPI was already on, but the location was empty I put a '1' in the location box and then applied settings.

  -C' is the only thing that I changed and now my printer is asleep as always, but when I print something from my iphone, mac or pc it wakes up and prints as it is supposed to!

  BTW before I went to the printer via the browser. I changed layout sleep in 15 minutes via the Control Panel on the printer itself, don't know if it helped the issue or not because I still had the problem of sleep after I set the timer to 15 minutes instead of 5 min. But I solved my problem after performing the steps above!

  Also note that on the one hand some ppl on here say it's a network problem or a router! This is NOT the case I never even tried these roads and I solved my problem only by changing the setting of the printer! I have not set a static ip address or something like that!  The above steps is things ONLY I touched and my problem is SOLVED!

  Router: NETGEAR AT & T 7550 wireless router/dsl Modem

  -Security: WPA2-PSK (AES)

  -Printer connected to the router via WPS (push button configuration)

  Printer: HP Officejet 4620e all-in-one

  Computer: Apple iMac OS X Version (connected to the network via wifi) 10.7.5

  Dell running Windows 7 server (connected to the network via wifi)

  Apple iPhone 4S (connected to the network via wifi)

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

  My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• Qosmio F20-154: BSOD and turns off

  Qosmio F20-154 goes to blue screen and turns off if the cd is inserted or if the flash drive is inserted
  Also hotkey error on turn on the computer

  Hello

  This means that you can not read data CD or USB key?
  Is this correct?

  Have you tried to boot from the CD or DVD?
  Have you tried to reinstall the OS?

• Satellite A60-181 heat up and turns off.

  Hope someone out there can help you.
  I was not able to use my A60-181 for awhile without being constantly plugged to electricity.
  And it seems to warm up and turns off.

  I bought a new battery, but I still get the same problem... and it is only 2 years old!
  Someone has an idea of what I need to do?

  In my view, this case is clear. It s a simple overheating. Usually the laptop stops automatically to prevent laptop damage material. Usually, this occurs if the laptop fans twist with speed and maximum performance.

  The reason for this behavior could be a dust and debris inside the laptop. Especially after 2 years of work and aspiration, the dust has a bad influence on the rotation of the fan.

  The module of cooling for computer laptop cleaning could help!
  But if you have no experience of it please contact the technician. It is recommended to clean the fans professionally.

• Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

  Hey,.

  Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
  It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

  This isn't a big problem, but it is annoying that I can not sort.
  I tried to run a check of problem to find a solution, but he says that he can not find a.

  Help, please
  Thank you.

  Hello!

  Can you please explain what you mean with refresh? And what exactly is happening?

  It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

  In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

  Good bye

• Equium A60: After BIOS update device will beep several times and turns off

  Hello

  I downloaded the windows BIOS update for my Equium A60 (dated 11/15/05) and ran the executable by following the instructions, after ensuring that the current AC has been connected, etc.. The update has got a little more to halfway when the computer turns off suddenly.

  Now when I try to turn back on it just a few beeps and turns off again. It seems to me that the BIOS is screwed. Is there anything I can do to get my machine to run?

  Thank you
  Phil

  Hi Phil,

  Unfortunately, it seems that if the BIOS of your laptop is corrupted. Unfortunately, he didn't there has no easy way for you to correct yourself and you will need to take the phone to your nearest Toshiba Service agent who has the necessary specialized equipment to reflash your CMOS with a new BIOS chip.

  Kind regards

• Satellite A135-S4666 - cooling fan turns on and turns off every 20 seconds

  Hello

  I'm from the Argentina... I just bought a new Satellite A135-S4666 and I noticed that the cooling fan turns on and turns off every 20 seconds.
  It is a little annoying and it disctracts me of what I'm doing... is there a solution?

  Thank you very much.

  Hi Martin,

  This behavior is perfectly normal and nothing to worry about. If you find the noise irritating cooling fans you are likely to change their behavior by using the utility of Toshiba power where you should be able to set the cooling mode to run more quietly. I think trhe default is to allow the CPU to run at full speed, which will, of course, the fans turn every few seconds, but by reducing the speed of the CPU, the heat produced will be lower and therefore the fans will run less often.

  Kind regards

• Why windows constantly error reports and turn off

  Why windows constantly error reports and turn off. It is THE most reliable service.

  * original title - sucks of windows *.

  Hello williamiscome,

  This error message do you receive?

  The computer shuts down or restarts it?

  Let know us and we will continue to help you.

  Best regards

  Matthew_Ha