Cannot reactivate XP Home after a clean install (part of COA sticker missing)

Similar Questions

• Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Does not not on M6-1091se after a clean install of Windows 7 first 64-bit home for fingerprint reader

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59664.exe

  Another option: click on the following link and click Search now :

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5306751#N2316

  Kind regards.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• BaseSystem.pkg.1518yN2yy file after a clean install of 10.5 - 10.5.8

  Hello

  After a 'clean install' 10.5 before moving on to 10.5.8 on my iBook to friends, I was left with this issue what a guess would be called the root folder. (Macintosh HD)

  (The folder that contains the Applications, library, system, and users).

  It is named BaseSystem.pkg.1518yN2yy that he holds 12.7 MB worth of material...

  I was wondering if everything I do with this file?

  I remember reading once you can remove it, but others have posted to leave him alone.

  Before giving my friend returned his computer, I would like to know if everything I do with this file.

  Thank you for your time,

  Eric

  If the computer works fine now, delete the folder. It's an artifact of the installation.

• RN v1 duo set for Time Machine and after a clean install of Yosemite I can't access my data

  Hi guys,.

  I have the ReadyNas duo v1 set for Time Machine and after a clean install of Yosemite I can't access my data.

  When I try via the Finder, files look for empty to me while info shows that they are not.

  I have no more support and I tried everything I could but all my data remains inaccessible.

  

  

  I have finally reached my backup via Time Machine, it was temporary unavailable yesterday.

  Thank you guys!

• After a clean install of Windows 7 pro on the Pavilion dv6-6147tx I have no access to the Universal USB po

  After a clean install of Win 7 pro on Pavillion DV6-6147tx I have more universal access to USB ports.  I can't find a driver to download HP downloads or disk 3 recovery disc. 3 USB ports o.k.

  I finally solved my problem of usb 2 with a NEC driver downloaded from HP believe it or not... He took a large sum oh hunting via other websites. My contact with the HP service is a waste of time.

  The pilot is SP47677. EXE from HP, it does wonders, but it does not appear on a search in the HP website.

  I solved my problem.

• After a clean install can I still get updates

  I came to the conclusion that I have to do a clean install and the company for the model mark I finally sent the operating system after 4 years now that I have (xp media center) came with sp2... but some how the jerk who took an illegal copy of xp pro also had put sp3 here... so when I do this may reinstall the sp3 from the ms site or I have to keep sp2 here until I can get a new copy of windows?

  And can I still get all the updates I've missed for the years spent 1 1/2?

  COPY of http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/93602a125bd8e133

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  * HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install) *.
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Threats of virus after a clean install... where is the 'old machine' file?

  My PC has a virus; My anti virus would not repair it... After doing a clean install of Windows XP, I remember reading that I can delete a file named 'old machine' if the new installation worked. I installed Microsoft Security Essentials... For 3 days, everything worked was great until this evening...

  Tonight, I ran an update of virus definitions and then run the 'full' scan Microsoft Security Essentials has notified me that I had a few threats. There was also a warning on a temporary file and asked if I wanted to send it to Microsoft I did...
  I am trying to be proactive and prevention viruses take over this machine again... I remembered reading after installation 'own' that I should remove the file 'old Machine' if the computer works well after the clean install? .. .also had a warning on a temporary file.
  Any idea where I can find the 'old machine' file; (I thought the clean install would remove all)... I did a search on my computer and come with nothing
  Help, please!...

  Hello

  Step 1: You can remove it in c:/Windows. With the help of old cleaning disc.

  In the disk cleanup, select the previous installation of windows. Put a check mark to remove it.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2: Run a virus scan to make sure that the computer is Virus-free:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  For more information:

  The disk cleanup tool stops responding while it is compressing old files on a Windows XP-based computer

  http://support.Microsoft.com/kb/812248

  It will be useful.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• No restore factory after a clean install of Windows 7

  Factory support key F11 RnR restores after a clean install of win7?

  I did a new install of win7 and installed a RnR last on my T410. When I tried F11 RnR, there is no option to restore with. My SYSTEM_DRV and Lenovo recovery xxxx exist and are suitable for all the files in them.

  I have recovery disks, but I just what to see if restore factory F11 works on this path.

  Fix. I had already understood what you were doing.

  I'll say it simple as I can:

  (1) installed at the factory

  The secret is windows 7 added windows re (recovery of win7 to the mix environment). Lenovo plant reorganizing this to factory support. This has created a hidden from the factory restore boot entry.

  (2) your installation "sideways", IE, cram lecteurC.

  This wax installation tips from lenovo. That is to say, no factory entry to move to the RNR standalone.

  (3) any property. do not delete anything. (such as SYSTEM_DRV).

  ==

  You have a dead now at the new disk space.  This works. Large.

  Use RNR and backup every week in a place (external). I know that it was not fun, but has been a learning experience.

  ==

  To clarify: (confusion)

  RNR is the main big daddy.  This is the main task is to rescue by using a backup RNR. Recovery (factory) is a subset, not exactly. This just transfers control to another entry for starting a recovery plant stuff. Thus, Rescue and Recovery.  I answer all the time about it. Yes, they look different, they are.

• cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate also not going anywhere - it's a pc - thank you!

  cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!

  message says 'unavailable activation server this time... error code 24:24.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• After a clean install of Windows Vista Home Premium, how long will it take to run updates and it will take a lot of bandwidth?

  updates after clean install of Vista Home premium

  I plan on upgrading the hard drive on my laptop two year old, which will require a clean install of Vista Home Edition full.  I live in a remote with the satellite internet service.  I would like to know in advance what will happen after the installation with the updates of the program.  I will ask you to install them? It would take a lot of bandwidth?

  Hi EllenCB,

  Welcome to Windows Vista community responses.

  Once you make a clean installation on your hard drive is erased. Now, when you install the operating system return updates that have been deleted will be delivered by Windows update to install on your computer. To save time and bandwidth, you can directly install Service pack 1 and Service pack 2 for Vista which would contain more updates. Of course when you run Windows update and when you try to download from the internet, your download speed will decrease. It is best to keep your system up to date which will allow your version of Windows to run better.

  Before installing the update, run the checksur tool, this tool is running an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Download the tool from the link below.

  http://support.Microsoft.com/kb/947821/

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Cannot open msconfig or regedit to search after a clean install of Windows 7

  Original title; Msconfig nor regedit answer

  After a new clean install, I tried to use msconfig or regedit in the search box, I get no response. I know that msconfig is in the system 32 folder, and it's there. I tried to use has been suggested by Mr. Fixit who doesn't work anymore. What else is there to try?

  I solved the problem. Here's what I did. I right click on your Start menu, went to properties

  then to start click and menu tab Customize button. Scroll down and check the box labeled "search".

  programs and Control Panel. For some unknown reason the clean install doesn't have this set as the default value.