Cannot set a video loop of background for the menu
It cannot be that difficult to do. I have damage animations. Buttons work fine. I can not put a video loop behind the menu.
I tried:
(a) alt + drag the .mp4 on the menu
(b) using the icon for selecting the video option in the control panel menu for .mp4 loop property
(c) by using a single video file to point to animate on for 2 seconds then set a loop after that for 27 seconds of video loop
Option C preview correctly and all, but just showed as a black background in the final exported .flv
Option A and B just did nothing. There is no video vignette that appears, or whatever it is.
The loop in the audio file works fine in the preview and the final result, but not video.
I've looked through many tutorials and just may not know what I am doing wrong. Any suggestion would be appreciated.
Thank you
Should work.
I would try the elementary streams: m4v and audio.
Are you sure there are no other layer interfering with the motion? For example, adding a still in photoshop without making the 'context' works fine until you add a background of movement. Yet to replace the technical background layer, but luckily leaves your extra layer covering the motion. Probably not in this case as one of your options produces motion.
What do you mean by video thumbnails? You're adding motion to the mp4 and also animate buttons?
If it does not, use any closure and just get the movement of work.
Test your basic bringing in a motion menu and using the m4v that to see if can get motion.
What is your default transcoding defined on your 1280 x 720?
Tags: Encore
Similar Questions
-
Hello
Is there an easy way to set the background image for the menu drop down and etc, current support only black as a background?
Thank you
Tom.
Welcome to the forums!
This is currently not supported unfortunately.
I encourage you to save a feature for this request:
https://www.BlackBerry.com/JIRA/secure/dashboard.jspa
See you soon!
Martin
-
After response failure attaching pictures to the email received, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply.
Hope I'm doing this right - tried restar, apparently seeking the answers and by publishing this request elsewhere. Appreciatte guidance!Hi Mike,.
You are welcome. If you have any other questions, you can always report to Microsoft Answers.
-
How to setting assisted by Hardvare activate virtualiziation for the computer?
How to setting assisted by Hardvare activate virtualiziation for the computer?
Original title: the Hardvare-assisted virtualization
Activation of hardware assisted virtualization is in the BIOS of your motherboard. How depends on the BIOS and the hardware you have.
If your system is a laptop or made by a major system provider such as Dell or HP, the system may not have the option in the BIOS, even if the hardware is able to use hardware assisted virtualization.
-
What is the best way to make the completely white background for the pictures of the products?
What is the best way to make the completely white background for the pictures of the products? I just need to show a product on a completely white background.
Shoot on properly informed white background is easy. Then be tot apply an adjustment layer to whiten the BG, then apply a mask for the domains you want to not so bright.
-
Cannot figure out how to "add-in" for the 2013 Outlook application... said the loading behavior is not loaded. How can I fix it?
Hi amandab9126792,
2013 Outlook does not work with Acrobat X because they are not compatible. Please check the compatibility to https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html.
Kind regards
Nicos
-
cannot set file error when trying to put the photoshop button in adobe muse, he is not 'supported color space. Resave image RGB or grayscale.
I believe that this is already the answer here:
https://forums.Adobe.com/thread/1917435
Thank you
Sanjit
-
InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »
This happens with a particular .eps file or many .eps files?
- The EPS files from Illustrator? What parameters are used when files are saved?
- Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
- Where are stored the EPS files that you place in InDesign? If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
- If you work on a network: can the files when they are saved as EPS files on your hard drive?
CARI
-
Black background in the Menu and the bookmarks toolbar
The background color for the Menu and the bookmarks bar is black and what is happening no matter what theme or character that I use. All other toolbars will change with the theme, but not the two above
This has happened
Each time Firefox opened
== improved FF 3.6
Have you tried to disable (uninstall) the Personas add-on?
Do you use the Persona and the theme at the same time?Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problemsIf this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
You can use 'Disable all add-ons' on the start safe mode window.
You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")If you have many extensions then you first activate half test extensions that half the problem.
Continue to divide the bad half that still has the question until you find that one is causing it. -
How do I set the background image for the menu I have the DSP in Muse
I design a layout and I want to bring converted of the PS to dream. Anyone know how I can do this.
I am trying set high and the low image of the menu in muse.
I would like to know how I can do better.
Thank you
Kristina
Hi Kristina,
You can disable the image that you have pasted above and also to create a toggled State for all menu items. In fact, there are 4 States: Normal, rollover, mouse and mouse down, but you will use usually two images because some States share the same image. Next, you need to use the menu widget and provide your cutting of images for all States in this widget. Check this link http://www.adobekb.com/building_your_first_website_pt4.html to this section all about:
See you soon,.
Mario
-
Set up a user profile specifically for the game
Hi all
I installed Windows 7 (64-bit) and use it mainly for work (Excel, SPSS, Word). I also have many programs start automatically with Windows and run as background processes. What I want to do is create a profile user who loads only minimum programs and services required to play video games. Currently I have to manually complete the applications and services, which is a pain in the thigh. How can I configure a user profile specifically for games?
TYIA,
Mark
Hi Mark,
You can create a new user profile, but you will need to put your computer in a clean boot for the new user account only State to play games and to disable applications/services that are not used frequently.
New user account will inherit all startup applications and services of the administrator account.
To create a user account , follow the steps in the link
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountTo put your computer in a clean boot State, follow the steps in the article.
http://support.Microsoft.com/kb/929135Aziz Nadeem - Microsoft Support
-
Original title: OEM Windows XP Home SP3 update XP Pro
Here is a compilation of the messages from another forum regarding
My problem:
---------------------------------------------------------------I'm trying to upgrade a Windows XP Home Sp3 OEM system to
Windows XP Pro. (There are a few Pro features
that are not available in the House I now need: (1) the files offline and
(2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
I don't want a clean install, but an upgrade. I bought a Windows XP Pro
Upgrade CD on Ebay that was Windows XP Pro
Gold (v2002). I'm sure that's true for the following reasons:It has been listed as an upgrade, but the CD is not labeled "Upgrade".
It seems very authentic with all Microsoft holography.
He came in the standard package of Windows XP (without box),
and it was sealed.
The name of volume for the CD is WXPFPP_EN. The Internet,.
It is the retail of Windows XP Pro RTM (gold)!Here are things I tried initially.
(1) I tried to upgrade to Pro from the purchased CD. It is immediately
has refused to upgrade indicating the upgrade OS (Pro) is older than the
installed OS (home)...(2) I read about "slipstreaming". "Slipstreaming" allows to integrate
a service pack with an earlier version of the operating system. I created a
upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
Autostreamer later, but it made no difference) from the purchased CD
and a file containing SP3.After you burn the CD and start the upgrade
(Windows installation), the upgrade process
product through "information collection."
"Dynamic update" and "Preparation of Installation" with
no problems. My computer restarted and returned to
"Installation preparation". A progress bar called 'Progress '.
quickly filled to about 90% and the hanging system
at that time there for about 15 minutes.
Then, I got the following error message:Setup cannot set the required Windows XP configuration
information. This indicates an internal Setup error.This is where I am stuck. I had to leave the installation at this point.
My drive is starts raining and I had to restore a backup.(3) just for the heck of it, I formatted my hard drive and
reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
I immediately used my XP CD slipstreamed Pro to try one
upgrade to XP Pro and IT WORKED! I need to find out why the
properly clean XP Home OS upgraded to XP Pro but my pre-existing
(with the files users, drivers, etc..) XP Home OS does not level
successfully to XP Pro.
-------------------------------------------------------------Another post:
Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
I continue with installation of all the essential and the add-on
pilots (essentially all my original version). Then, I
set up a network connection and firewall. With this configuration,.
I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
success (even if the upgrade not configured my graphics
card properly). I guess my current problem is either the registry,
the WINDOWS, some user file or parameter file.
---------------------------------------------------------------Another post:
I made a file and the backup of the folder C:\Windows folder
on my system that is pre-existing (OEM XP Home Sp3). I also did a
separate the backup the State of the 'system' on my pre-existing system.
These are added my full image backup of her pre-existing
system a month ago.I did a backup image of my system (minimum fees OEM XP Home
SP3 with all the original installed drivers over a network configured
connection and a firewall configured). This system will upgrade
XP Pro with XP Pro SP3 slipstreamed CD successfully.Experiment 1:
I've restored my minimum system. I then restored the C:/Windows folder
and the State of the pre-existing system backup system. A startup
has managed (with a minor irritant). I had to activate Windows.
Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
at the same place during the upgrade and gave the same error as before:Setup cannot set the required configuration information Windows XP.
This indicates an internal Setup error.Experiment 2:
I've restored my minimum system. I then restored the system state only
the backup of the pre-existing system. After startup I was asked to
activate Windows, but answer Yes to the question would be to disconnect me
the system. I couldn't get connected to try the XP Pro upgrade.Experience 3:
I've restored my minimum system. I then restored only the C:/Windows
the backup of the pre-existing system folder. Once again, as in experiment 1,
the upgrade failed at the same place with the same error message.----------------------------------------------------------------
Before the experiment 3, I hoped that 3 experience would succeed so I
could conclude that I had a registry problem. I'm not sure now.
I don't know what to try next. Take the minimum system and reinstalling
my files of the user is not an option that my hard drive has over 200 GB of
programs! If I restore all files and folders of my pre-existing
I would still have backup to restore a system state the reliable (read the registry).
---------------------------------------------------------------------Sorry for the length! If anyone has any ideas I would appreciate your responses.
Thank you
Hello
This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.
For more information, see this link:
Error message: Setup cannot set the required Windows XP Configuration information
Hope the helps of information.
-
Set the font size for the menu items and content of the label tab?
Old eyes, small fonts.
I can manage the fonts/zoom for the content of the site. SITE OF FONTS ARE NOT THE PROBLEM.
Y at - there a way to set the font of the browser settings in: config to control the fonts in the BROWSER MENU ITEMS (view file Edition... etc) and TAB TITLE (TEXT) CONTENT?
PS - Keep us ordinary mat canned. A simple 'no' or 'Yes' with simple details of relevant about: config entries, would be nice. GREAT access to the most COMPREHENSIVE list possible would be on: configuration settings
You keep it as the 'EASY' button, I take it? Ever have something like this for Thunderbird, now I feel a little stupid for not connecting the dots. Thank you.
PS - just in case... Got a list of about: config options?
-
My computer says "no audio output device is installed" when I open the Device Manager there is no 'sound, video game... ". "in the menu. What should I do to get a new installed audio device?
Stan
Hello
1. What is the brand and model of the computer?
2 did you and changes before the show?Method 1:I suggest you open recognition of the device by using Device Manager.
(a) click Start and type Devmgmt.msc, and then Enter. The Device Manager window opens.
(b) click on your computer as the location for the scan.
(c) on the Action menu, click Scan for hardware changes.
(d) to close the Device Manager window, and then restart the computer.Method 2:You can try to download and install the latest drivers for the sound from manufacturing sites and check.
Check out the following link.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 3:You can see the following link.No sound in Windows
For reference:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problemsSound cards: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questionsIt will be useful. -
Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.
Hi cardsharkha,
I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists
How to manually clean a broken Silverlight installation
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
Computer had run this morning and I was away for a few hours. When I got home, I found that my HP S5780t was closed and then heading back to the top, then stop, start... Power supply LED shows green, disconnected from hard drive and DVD drive and s
-
VI causes CPU load after several days of running
Hello I have a strange problem. I have craeted a control test VI bench and it runs on five computers, five test of control systems. All PCs have almost the same hardware, same card mother, same processor, etc. Normally the CPU load is around 50% when
-
I would like to go back to XP, Vista Home premium?
I would like to go back to XP, Vista Home premium I need a new license of juror. can I use the key of vista for xp pro?
-
Software iolo System Shield. Have tried everything delete
Have tried to solve prove.
-
Updates of blackBerry OS from Smartphones and applications.
im getting a curve 8330 the next day or to and tried to find the windows vista upgrade and could not could someone send me a link? and what other improvements are good get for it? Thanks for any help.