Cannot set properties from Slide Master

Similar Questions

• Essbase Studio - cannot set properties of essbase to the parent level

  Hello
  
  I have a dimension of product recurssive hierarchy. Source is an oracle table something like
  Alias of parent child
  Ap1 p1 P
  p p2 ap2
  ap11 p11 P1
  ap12 p12 P1
  
  I have a self-join between parent and child column, and have no problem related to the hierarchy of construction
  
  However, I am able to assign an alias to all other members except the per Member
  
  Any advice on the issue will be useful!
  
  Kind regards

  Is the name of the Dimension-P?

  For example, the dimension is entity and the hierarchy is

  Entity entities
  Entity pollup replacement
  All entities zzz

  If so, you must set the properties directly for the Dimension Member
  IF this isn't the case, then can you add where P is a child of the dimension member?
  In recursive hierarchies, you should only be setting properties on the child members as it should the parent other members or the members of level zero is

• cannot download pictures from a Master Pro card.

  I am in a panic. Back to take pictures and now that they do not completely download. It says preview not available for this file. I've tried everything. Some pictures were developed, but when you click on them they say - could not read an excerpt. Help!  This is a new card and have never used a Master Pro before.

  There is a good chance that it is a hardware problem, that your card is not correctly recognized, if you have an old card reader he may not be able to manage new types of cards.

  Excatly what card was it? Is what card reader exactly?

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• You cannot set declaratively developing the slider if you specify an ONLOAD.

  Hello
  
  In my application, I have two javascript functions in the Html header area... and by calling the onload in the Body Html attribute... This sceneriao he launched an exception as shown below...
  
  
  
  1 error has occurred
  You cannot set declaratively developing the slider if you specify an ONLOAD in this attribute. You can set update of the slider programmatically by using the following syntax:
  OnLoad = "mystuff (); first_field(); »
  
  
  can u suggest me how to overcome this problem...
  
  
  Thank you
  David...

  Hi David,

  On your page, go to your page attributes and you will see that it is to set the focus on the first field when the page loads. You need to remove what you can have only a single onload function call. If you need to set the focus, your onload function is adjustable to do this.

  Andy

• Customize the navigation on Slide Master

  I work on a new project and want to create a personalized interactive navigation bar. I am currently ideas and was hoping for some feedback on other methods, I can try to configure this or a simple * may not * if this is the case.

  Ideal solution:

  When you click a button, a new group of objects (text, buttons, forms, etc.) are displayed (see image below).

  1st test:

  I was able to create all the elements and do this work on a completed content slide, but there was no way to easily apply this to other slides in my module. When I tried to copy and paste the Group of objects to a new slide, the name of the changed objects that destroys my advanced to show/hide Actions items making this ineffective solution.

  2nd test:

  Then I tried to re - create this structure of navigation on a master slide. I was able to create all my icons/button/from forms and put everything to work the way I wanted, however, when I tried to program the button 'show' options on success, it is gray. I then tried to create a tip Action to display these items, and it does not list the objects or the group I created on my model of slides. Is there a way to show/hide objects or groups of objects on Master Slides?

  I also tried things:

  -Tried set-up and slidelet on a content slide, but you cannot add buttons to the slidelet.

  -Tried to assign the group I want to show a variable and then having my entitled main button a new value on success. Problem with that is a slide master that there is no feature ' on entering...» "so there is no way to hide the group.

  Is someone has created this type of navigation Dynamics show/hide in a module? Any ideas on how to implement this?

  Double post, look in another thread, please. But someone has been deleted and another thread, just at the moment where I posted this reply:

  Take a look at: why I love the shape of buttons - 6 Captivate - Captivate blog

  You can have on Master slides form buttons that control objects on normal slides.

  What you never tried, is to make the Group of objects you want to order to show/hide with the master slide the buttons of time during the rest of the project (always on top). In this way, that the objects do not have a unique ID. I also used a combination of master slides and timed for the rest of the project in a scenario: buttons in the form of rocking - Captivate 6 - Captivate blog

  When I need custom navigation I always use this approach: objects of time during the rest of the project + buttons form of master slides.

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• Receptive Slide height develops all the objects on the slide master background.

  Hey,.

  If I build a sensitive project and slides, I need to unlock the height of the slide in mobile mode on some slides to create a scrolling to display more content.

  When I adjust the height of the blade, it develops all the objects in the background of the slide (my header, title...). These elements are not merged.

  Is there anyway that I can adjust the height of the blade so that it is not developing all the objects on the slide, only the backdrop (i.e. the white canvas). I try to use a model of slides for content pages.

  Or is the only way around it to create a number of different slide masters with heights of slide?

  See you soon

  Hello

  I feel your pain. I struggled with this for a long time, but finally found a solution.

  If you want to extend the height of the blade, creating a scroll bar. But you want certain elements to stretch and others do not.

  
  

  Object to Extensible NOT / Static

  • Create in the Slide Master
  • Set the properties top and % Relative height.

  Stretch/dynamic objects

  • Create directly in slide film
  • Set the Top % Relative property
  • Set the Height property for % (not related).

  I recommend to create a slide film finalized and then duplicate this slide for all other instances.

  Let me know if it works.

• ORA-12054: cannot set the ON COMMIT...

  Hello
  can someone please tell me what am I missing here?
  I can't create a materialized view, but I can't understand why is this?
  

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE    9.2.0.7.0       Production
  TNS for HPUX: Version 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  
  SQL> r
    1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
  
  MASTER                         PRI
  ------------------------------ ---
  CCR_ACTION_DEF                 NO
  CIS_CASE                       NO
  
  
  
  SQL> r
    1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
    2    FROM user_constraints a, user_cons_columns b
    3   WHERE a.constraint_name = b.constraint_name
    4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
  
  TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
  ------------------------------ ------------------------------ - ----------------
  CCR_ACTION_CASES               ID_PK                          P ID
  CIS_CASE                       PK_CIS_CASE                    P ID
  CIS_CASE                       SYS_C008496                    C ID
  
  
  
  SQL> CREATE MATERIALIZED VIEW mv
    2    REFRESH FAST ON COMMIT
    3  AS
    4  SELECT c.ID,
    5         CASE
    6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
    7               THEN 1
    8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
    9               THEN 2
   10         END TYPE,
   11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
   12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
   13         c.datum + a.due_time / 24 due_date
   14    FROM ccr_action_def a, cis_case c                                  --users u
   15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
   16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
   17                                                    NVL (c.case_code_type_id, 0)
   18     AND NVL (a.code_id,
   19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   21     AND (c.datum + a.due_time / 24 < SYSDATE)
   22     AND state IN (1, 2)
   23  UNION
   24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
   25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
   26    FROM ccr_action_cases a, cis_case c
   27   WHERE c.ID = a.cis_case_id
   28     AND (a.due_date < SYSDATE)
   29     AND state IN (1, 2);
    FROM ccr_action_cases a, cis_case c
         *
  ERROR at line 26:
  ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

  Vili Dialis wrote:
  Rob, if you have any comments on my last query operation, I would be greatfull.

  Vili,

  You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

  Kind regards
  Rob.

  Published by: Rob van Wijk on 14-dec-2009 12:09

  And two boards that are not linked mv:

  (1) as has said, use a.id and c.id in a group by clause for the query itself work
  (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

• RN314 cannot set up alerts

  Just I have an open for this support ticket and I'm getting nowhere fast at the moment, while the community has been so useful until now I was wondering if someone here could help/advise.

  -For the NASs x RN31400 2 I am owner and you have registered with you I am unable to setup e-mail alerts. I tried to use 3 e-mail addresses of 3 service providers: Yahoo, Hotmail/Outlook and also my own ISP TalkTalk email providers. No matter what settings I use for all 3 e-mail providers, I get the following error message: check the settings of the smtp server cannot send a code error message 5008010002 msmtp test e-mail alert on my 3 x NV + s very well using my Yahoo e-mail address work. On one of the RN31400s using Yahoo worked initially and the alert section would say that it has been configured correctly and I'd get emails to my 2 hotmail addresses, it was on 1 of my RN31400s on the other RN31400 the settings would save not and always say, there was a problem but I had managed through test messages. Now, no matter what settings I use, which email provider I use, etc. I can't e-mail job alerts! Please help because this is obviously a problem with the NASs and the software on devices, the version of the firmware on two is 6.4.1 Ive set up the addresses of 3 E-mail on an e-mail within my network client and all 3 work well, the 3 x NV + s do not have a problem using my Yahoo account to send alerts check my routers and firewalls there is no blocked traffic and I can't telnet to Server 3 Messaging without problems. Please advise/help, thanks.

  And...

  OK the update of the firmware did not work, I have one of the update firmware version 6.4.2 RN31400 and after 2 reboots, I am still unable to receive job alerts.

  The I am using SMTP servers are:

  Yahoo =
  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp.mail.yahoo.com
  SMTP port: I've tried 25, 465, and 587
  From: [email protected]
  Use TLS: I tried checked and unchecked

  Hotmail/Outlook.com =
  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp - mail.outlook.com
  SMTP port: I've tried 25, 465, and 587
  From: [email protected]
  Use TLS: I tried checked and unchecked

  TalkTalk = it's the ISP I use!
  ------------------------
  Email provider: Custom
  User: xxxxxxx@TalkTalk,net
  Password: xxxxxxx
  SMTP server: smtp.talktalk.net
  SMTP port: I've tried 25, 465, and 587
  From: xxxxxxx@TalkTalk,net
  Use TLS: I tried checked and unchecked

  Ref: browser, I used Firefox and Internet Explorer, not that it should make no difference whatsoever.

  Ref: screen captures, don't need the parameters are listed above for the two RN31400.

  Ref: parameters for the NV 3 x + an are as follows:

  Yahoo =
  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp.mail.yahoo.com
  SMTP port: 465
  From: [email protected]
  Use TLS: Is checked and

  Test of the emails for the configuration of alerts on the NV + s are still working fine, DO NOT WORK for the RN314.

  Please tell us what can be done to solve this problem, thank you.

  And...

  Full error message =

  Unable to send a test message.

  Unable to send a test message. Check the settings of the SMTP server. Code: 5008010002 error msmtp

  DateTime: 05:02:09 04/02/2016

  And...

  Hello

  Just right now I can read the KB article - which does not help somehow:
  KB.Netgear.com/app/Answers/Detail/A_ID/23066

  There is nothing wrong with the configurations that I use.

  All 3 servers SMTP and the above settings work very well on my NAS NV +.

  All 3 servers SMTP and the above settings work fine on Outlook or Mozilla Thunderbird's within my network.

  All servers SMTP 3 and address listed above work fine when I Telnet to them within my network.

  First settings of Yahoo SMTP worked well on one of the RN314 and seemed saved and ok.

  Also...

  At the beginning of Yahoo SMTP settings worked well on one of the RN314 but not record or say that it has been configured correctly.

  Then obviously there is something wrong with the SMTP service/server on these NAS RN314 2 bed.

  I am not willing to allow you access as it will provide no benefit whatsoever.

  For the course of 20 years, so it's nothing that can be done with you giving remote access with the exception of confirm you what I have already said previously, I have worked in it.

  And...

  So please advise what Netgear will do then or advise what other other confirming my settings allow remote access?

  Your forums to research it seems that problems with mail like this are apparently quite common, so what has already been done to solve the problem?

  Also the error code: Code: 5008010002 error msmtp

  Why you are not this survey with your development teams who wrote the OS on the NAS working on what actually the error means?

  There is nothing wrong with the configuration that it works very well on my 3 x NV + NAS, it works very well in e-mail clients, it works very well in Telnet, and it worked very briefly on the 2 x RN314 of for of Yahoo SMTP settings.

  Eron - if you are unable to help further please add this problem to your support line... 3rd line?

  Thank you.

  And...

  I also tried my account GMAIL apps less secure according to this thread the value:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/cannot-set-up-alerts-on-my-ReadyNAS-RN314/TD-p/...

  GMAIL =

  ------------------------
  Email provider: Custom
  User: [email protected]
  Password: xxxxxxx
  SMTP server: smtp.gmail.com
  SMTP port: I've tried 25, 465, and 587
  From: [email protected]
  Use TLS: I tried checked and unchecked

  If this does not work on the RN314 but it works very well on the NV + of via Telnet and in an email client (x 2)

  Please escalate to your next level of support, thank you.

  Right, I have fixed on one of the RN314 far...

  I backed up all my data on this RN314 and did a factory default.

  I have reproduced the RN314 settings manually then nonworking time for the reset RN314 except for identification data, i.e., name, etc.

  Exactly as it was before... and now the RN314 in default works fine.

  I am currently backing up the data on the RN314 now inactive to perform a Setup factory on that one and see if that solves the problem on this one here.

  Then we can close this and I will refer to it with a new thread if I need if the second RN314 still has problems after the default settings.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• Woman cannot send emails from his iPhone.

  Original title: since my wife updated Microsoft Hotmail security settings using my account as a substitute last month that she cannot send emails from his iphone

  My email address is * address email is removed from the privacy * and his is * address email is removed from the privacy * is a timing issue with the iphone, we were on the helpdesk of Telus and Aplle helpline unsuccessfully to Ant and now she received another email to update its security setting again? pls help?

  Try asking in the Hotmail/Outlook.Com forum:
  http://answers.Microsoft.com/en-us/outlook_com

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Cannot transfer photos from the camera...

  Cannot transfer photos from the camera... Just recently, during the month, Windows XP does not recognize both our Sony A100 camera or card reader when you try to copy photos in a computer file - it has always in the past.  Interestinly, there recognzies the photos and can do a slide show of the card reader or camera, but does not recognize them when you try to transfer using Windows scanneer and camera Assistant.

  Hi Byron,

  Thanks for posting in the Microsoft community

  From your problem description, I understand that the digital camera is not getting recognized on Windows XP. Please let me know if you do not experience this problem.

  You did changes to the computer before the show?

  I suggest you try the following steps:

  Method 1: Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: A digital camera is not recognized in Windows Vista or Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Cannot print photos from my HP all-in-One Photosmart Plus printer C210

  Since I've owned this printer, I was never able to print photos from the main or the photo tray!  Use Windows 7.  No matter what try I said, I get an error message "Re-insert or lower the Photo tray.  When I try to set again, nothing seems to be wrong with the tray (s) and the printer tries to print again and I get the same message.  Have tried everything, including reinstalling the driver of printer without result.  Cannot print photos from any photo software (I have 4) including PhotoShop Elements.  What I am doing wrong?  Thank you!  I wish that I had not thrown my old all-in-in-one!

  Thanks 8lives, I'll check the links you have provided.  I am using HP Premium 4 x 6 paper.  I have not been able to print on plain paper before, but it will try again today.