Windows Update has ruined my operating system

Similar Questions

• Windows Vista has crashed, "the operating system not found" error, can I load Windows XP on a partition?

  I have an Acer Aspire 5516, with pre-installed Windows Vista. I didn't know that it did not come with a recovery disk UNTIL my system crashed! During a routine virus scan, I got a blue screen saying a major problem has been found and the system has been shut down. I followed the instructions to gracefully shut down my laptop. When I turned this back on after the "Acer" logo he went to a black screen with info on my computer and the last line States "not found operating system". That's when I discovered there was no recovery disc & it is integrated into the system. To access this system you we F8 to enter safe mode, then Alt F10 to access 'erecovery management system. Neither one of these functions operate! Still getting the black screen with "operating system" not found I have a Windows XP my laptop previous. What I was wondering is if I can load on my Acer, possibly on a partition, in order to be able to get into my laptop and save all of my files? I'm terrified of losing everything I have! I have thousands of pictures that I can't replace. If anyone can help please do! I am on a very limited income & can not really afford professional help. Thank you very much in advance!

  Hello

  normally with an Acer you press Alt + F10 at startup to start the hidden recovery partition recovery, not F8, then this combo

  but you do not have an option to save your data, that

  in daily use acers normally have a system partition, a partition of data to save your data, etc. to and also this hidden partition recovery

  and read this on data recovery, too;

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

  read this information about method 3:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

• I have to update my Microsoft Windows XP Service Pack 3 operating system.

  I have to update my Microsoft Windows XP Service Pack 3 operating system.

  However, in my services, I am unable to change my Automatic Updates service status to started.

  I get the error message - error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Hi, Bill.

  Follow the instructions here:

  Error 1058 "error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

• Install Windows XP as a second operating system with Windows 7.

  I am trying to install Windows XP Home Edition on a second internal hard drive with Windows 7 Professional on drive C as my main OS. When I try to install XP, it will start to load up and then I get a blue screen with a message that a problem has been detected and windows has been closed to bottom to provent damage your computer, if it's the first time, restart your computer if this screen appears again, follow these steps. Check to see you have enough disk space, if the pilot is identified, disable drivers or updated drivers or try to change video cards. Check with the hardware vendor for any BIOS updates. ect. I have monofamille this computer about 6 months ago, which has a mother Intel DX58SO with the I7 processor, WD VelociRaptor 150 GB Sata Hard Drive, Seagate Barracuda 500 GB SATA HDD, 6 GB Corsair Dominator memory cards, MS Wireless 6000, EVGA GeForce GTX 260 video card keyboard/5000 mouse, Lite-On DL Sata burner DVD and a Samsung LCD screen. Could someone give me a solution to install Windows XP as a second operating system on the second hard drive.

  Hello

  Why not use Xpmode with Virtual PC, both are free. (You will have to use XP 32-bit SP3.)

  Make sure you that have enabled in bios first virtualization.

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Slan go foill, Paul

• Whenever I log in I get an error message "Windows Update has stopped working".

  original title: everytime I log in I get an error message "Windows Update has stopped working".  I tried a manual update as well and it does not work.

  In details, the error message is:

  Signature of the problem:

  Problem event name: BEX

  Application name: wuauclt.exe

  Application version: 7.4.7600.226

  Application timestamp: 4a7b870b

  Fault Module name: StackHash_6bc7

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 00404968

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 2057

  Additional information 1: 6bc7

  More information 2: f3f6a1403802118ada460cd45530935b

  Information additional 3:6477

  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  HiTunnywig,

   

  (1) since when are you facing this problem?

  (2) are - what you remember for change?

   

  Wuauclt.exe rest reside in the background and checks the Microsoft Web site for updates to the operating system. Originally, wuauclt.exe is a legitimate system process, which is located in C:\Windows\System32, but there are cases where wuauclt.exe is actually a disguised virus, Trojan or worm.

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 3:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

  Original title: error code 88982F04

  Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

  Thank you

  Delete C:\$WINDOWS.~BT

  Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

  

  If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you find it difficult to do some of the steps below, please see instructions how do their:

  http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• Windows Update has encountered an unknown error. Code 80070026

  Windows Update has encountered an unknown error. 80070026 code that performs updates not be installed

  Although this page shows a different result code then what you see, please follow the steps on this page-
  Windows Update error 80070490

  Be sure to download the Version of (CheckSUR) system update readiness tool that matches both the edition of Windows installed and the architecture of the system.
  To see what is the architecture, open system in Control Panel.
  The architecture of the system appears under system, next to system type:

  When CheckSUR has finished download, set up the system before running the boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall and make sure that the native Windows Firewall is now on. The systemmust be connected to the internet when you run CheckSUR.

  Once you have restarted the clean boot state, run CheckSUR.
  Restart the boot state minimum same once it is finished and see if the system can search and detect updates necessary now.
  If possible, suggest that see you if the system can install the updates now.

  Cancel the Clean boot steps State now and restart the system once more.
  If this does not solve the problem of installation of update, then do a "upgrade on-site" aka Repair Installation, as described on the Windows Update 80070490 error page.

  Expert MowGreen Windows IT Pro - consumer safety

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• Windows Update has not been installed successfully in 8 months (error codes: 8007371B & 643)

  original title: Windows Update has not been installed successfully in 8 months

  Windows needs to install 7 updates each time I receive the notification. in any case, he attempts and succeeds only and him remains always fail. Those who succeed keep be redownloaded too, so I really have no idea if it's REALLY successful.

  Error codes:

  Code 8007371B

  Code 643

  And the last 4 are as follows:

  Code 8007371B

  The success is always to:

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  Thank you

  -Mike

  Run the tool and then try WU.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• After Windows Update has failed I can print is no longer.

  original title: no printing

  I have a dell xps8100 windows 7 home premiun after a windows update has failed my printer stopped I tried a system restore, but he failed and he said try again

  my printer does not recognize my computer even for a test

  cgb321

  Try reinstalling the drivers for your printer. I had times when an update has done something that required that I have reinstall the drivers for a product. Don't know why, though. It's not really 'supposed', but he did.

• Satellite L850D - 12 p: need to copy of Windows 8 to reinstall the operating system

  Hello

  I have a Satellite L850D - 12 p and need a copy of windows 8 to reinstall the operating system

  I deleted all the data on the HD including the recovery partition, I don't envy spening £30 order disks and want to download the

  The supreme macine provided with Windows 8...

  Thank you

  Jaz

  It of not possible to download a recovery image Windows 8!

  If you have not created the disc clean recovery or recovery USB flash stick memory such as mentioned in the user manual, you must order such environment.

• FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  Try the FoxPro Forum

  http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

  Don

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]