Cannot start-fix Windows 8

Similar Questions

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• I cannot start the Windows Firewall, I get an error 0x6D9 code

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.

  2. you do not do so in respect of the services? You do it in this way? ...............

  Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...

  under status, it lies and must say... Has begun

  under Type of status, it must be said... Automatic

  If it does not say that, right click on Windows Firewall > properties...

  in Startup Type, click on the pointer, and then select Auto

  to the service status, click Start

  Click OK when finished.

• Error of 0x8007042c, cannot start the Windows Firewall

  Original title: error 0x8007042c, you cannot start the Windows Firewall

  Help

  I can't have the windows firewall to install and run...

  I have a picture of a mistake, but I don't know how to post the photo of the error here.

  Firewall Windows cannot change some of your settings
  Error code;   0x8007042C

  Concerning

  Bill

  E-mail address is removed from the privacy *.

  Old man again on XP PRO

  Hi Dan,.
   
  You might have a corrupted user profile, I'd like you to create a new user account and test the question.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

  original title: Error Code 0 x 80070424 on the Windows Firewall settings

  I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

  Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

  Hello

  Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

  This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

  Download the two files from the registry

  http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

  The base filtering engine

  http://download.bleepingcomputer.com/win-services/7/BFE.reg

  Run them and click YES when you receive a UAC prompt

  Restart your PC

  Press Windows key + R and type

  regedit , and then click ok

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  Right click on it -permissions

  Click ADD and type

  Everyone, and then click ok

  Now click on all

  Below, you have the permission for users

  Select full control, and then click ok

  Press Windows key + R and type

  services.msc , and then click ok

  Start the service database and then filtering engine service windows firewall

  If you still get this error

  Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

  Download and launch this key

  Shared access

  Click YES when you receive a UAC prompt

  Reach

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

  Right-click on -permissions

  Click Add and type

  Select full control and everyone

  You should be able to start right now the firewall

  You can also Miss defender of windows security center, BITS and windows update services

  Download

  Security Center service

  http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

  Windows Defender

  http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

  BITS

  http://download.bleepingcomputer.com/win-services/7/bits.reg

  Windows Update

  http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

  Run them and click YES when you receive a quick restart, UAC the PC
  

  
  

  Good luck

  * Edit *.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

• Code 10 device cannot start after Windows update.

  Original title: had this application update 26509 operation message

  I hope that I chose the right place for this question

  By PAD so I give you all the unusual things that have occurrred recently

  When I clicked shut off (to turn off the computer) last night I received a message something like this but this isn't verbaitim.

  -apply the updates do not turn off or disable... Let him go was not a thing then it shuts

  This morning from my computer (windows 7) I see a lot of numbers flight by update of something... Finally he stayed still long enough to read this message

  ' application operation update 26509 26509 (\Registry\Mach...) . who took about 90 dry

  then the screen changed to say prepare to set up windows (while I was getting a large piece of paper to write it down in my computer I went back to what is normal for my computer open) he says treatment auto - VGA - the screen is black for 2 seconds and my office is open and functional.

  --------

  Please lmk if I should post this separately if it is not part of the above problem

  OK not to confuse things and maybe it's not bad but I will also attach additional information... Thank you for your patience.

  Sometimes messages arrive on my screen and went so fast that I don't know what they said and that's what's happening all I saw were collected WAN miniport (ATW) #2. and something that affects the usuage of my computer... I went to the Device Manager and under "Network card" was a green line to see, I opened 2 inputs was the first

  "Intel (R) 82578 DC Gigabite Network Connection" under properties it says that this device does not work correctly

  the second entry "WAN Miniport (ATW) #2 * was a yellow triangle with a point of exclamation and under properties say this device cannot start (Code 10) .

  I'll wait on this case its not important right now with my orogonal above problem

  Thanks again for you time and patience... looking forward to your entry

  Learning to 62 (aka granny)

  Hello

  1. have you successfully install the update?

  2. are you able to connect to the desktop without any problem?

  Was the message you saw before Windows starts, the system applying these updates. This is a normal procedure that Windows takes above all the critical updates are applied. If you were not able to start Windows, then we might have a problem with Windows update.

  Regarding your second yellow exclamation on the wide area network WAN miniport, you need to update the driver for the network adapter.

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the network adapter.

  I suggest you run the automated FIXIT from the link below and.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I would say as update you the driver for network card and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows cannot start the windows Vista Firewall service

  My system is windows vista. When I tried to 'turn on the windows firewall' the message I got was ' Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the windows firewall service? "I clicked Yes and another message came:" Windows is unable to start the service windows firewall. " Then I went "firewall" on the Start button and click on "Windows Firewall with advanced security on local computer" and a message with the error code: 0x6D9 came. Can I get the solution to this problem of anyone in this forum. I will be grateful.

  Thank you

  Hello

  You are running a third part of the internet security solution? Many of them include a firewall that is clean and disable the Windows Firewall. If this is the case, you should first disable this one before the attempt to initialize the Windows Firewall. It is not advisable to attempt to run two firewalls at the same time.

  If you have recently deleted (uninstalled) a third party solution, you may need to run a cleanup this provider of software tool to remove any debris WASTE of this program in order to activate the Windows Firewall.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall

  Hi all
  I hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.

  I lost my firewall, l, and network connections.  As advised I checked the status of the automatic Wireless Configuration.  The State was "arrested" and was not a solution for this.  I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing.   Now I can sign BT.openzone - it's the only way I can use the web.

  Also I can't start my Windows Firewall.  I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed.  I also brought my laptop (HP compaq nc4200-Xp) to my daughter.
  I don't have a recovery disc and the disc I have with drivers does not download.  I would be grateful for any resolution of this problem.    I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.
  Thank you very much
  Jacky

  Hi Jacky,

  Thank you for your response.

  I suggest you follow the steps in the link below.

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

  Note: This also applies to Windows XP Service Pack 3.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows 7 - "cannot start service Windows Security Center" aka WSCSVC. Error 1075

  Set indicator important message...

  "The Windows Security Center service cannot be started.

  This happened after I was deleting my WINDOWS 7 malware/virus. I open "SERVICES" went to the CENTER of the SECURITY in respect of services and a click with the right button on the name WSCSVC or attempt to start the service, following the verbosed of error/warning:

  "Windows failed to start the service on Local Computer Security Center.

  "Error 1075: the dependency service does not exist or has been marked for deletion.

  I think this may have had parts removed by Hijack, Anti-Malware, TDSSkiller, gmer, Housecall or ComboFix when I get rid of my system from Malware/Trojan/virus. With the exception of the Security Center, my system is now working well.

  The WSCSVC registry may have been deleted and the residue in the capture instant/backup/restore points. I know This is a very important function to have running, as it monitors your safe; Firewall, antivirus, UAC, Anti-Spyware and updates, etc.

  How to restore this program back to its normal state of operation, even if there are no backup? IE (manually enter the information in the registry?

  I'll be somewhere pointed to download the replacement program? Perhaps out of the installation DVD WIN7?

  Are there other ways as an option to solve this problem? Perhaps, another Member of program state and remove the remains of Security Center?

  Thanx

  In any case, this might do the trick: http://www.winhelponline.com/blog/error-1075-when-starting-the-security-center-service/

  Note: I know it's for Windows XP, but the same steps will apply to a Windows 7 computer running.

  Itknowledge24.com

• cannot start the window 8 dvd...

  I'm trying to install window 8... I put the dvd in the drive... and restart... and I pressed f9 and choose internal cd dvd rom... After pressing enter the window normally starts... no installation of window screen 8... I used f.f. bootable too, but he had not worked as well...? What do I do?

  Thanks for the information,

  I suggest you to change the boot order in the BIOS. The discs must load the way you do. Here are the steps to change the boot order.

  1. Turn on the computer and immediately press "F10".
  2. Once in the BIOS, select the option "System Configuration".
  3. Select "Startup Options".
  4. Select "Boot order".
  5. Change the drive DVD-ROM to the first option.
  6. Restart the computer with the disk in the drive

• Cannot start in windows

  My computer crashed guard restart once I had downloaded cain abel anf and there are two choices displayed whenever I'm trying to start windows (Startup Repair and start windows normally) once I had chosen the Startup Repair there is nothing in the system recovery options and I can only access the system 32 folder startup, windows system restore repair complete the system restore, windows memory diagnostic tool, cmd, and dell factory image restore. I could not boot into safe mode.

  Moved from Vista devices and drivers Forum.

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  And I hope that these links should provide an explanation for all of your problems:

  Reference Dell troubleshooting with startup problems:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

  Run the built-in diagnostic software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  And if this does not resolve your problem, please contact Dell:

  http://www.Dell.com/support/contents/us/en/19/category/contact-information

  Or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• Cannot start other windows

  I created a second installation of windows on my other drive, so I have two windows but now it does not start in my original windows.

  I changed the boot order in the BIOS but it always starts in the second installation (disk 2).

  In disk management

  Disc 1: Active Primary Partition

  Disc 2: System, startup, active pagefile, dump, primary Partition.

  I know that drive 1 has a valid windows in this regard.

  I used Windows Disk and retrieved the original installation.

• Firewall Windows authorization driver is missing - mdsdrv.sys and therefore cannot start the Windows Firewall

  Original title: "Missing mdsdrv.sys driver is missing on my system so I can't launch the firewall. No idea how to restore this driver? "
  I tried the solution of SFC/SCANNOW - nothing appears. The TXT file is empty.

  I tried the solution repair.bat - nothing - not even sure it ends; the black screen disappears without any messages

  I tried the Microsoft Fix - it - nothing outside of a message 'Sorry - you'll have to Fix-it-yourself' telling me the firewall must be enabled manually. YES, I KNOW WHO!

  I'm going crazy that I installed and uninstalled various malware detectors/antivirus programs and still no change. I'm sick to death of it and above which, I can not install my new printer/scanner because he needs the firewall so that it can communicate with the laptop and of course the firewall is in a coma so don't not speaking.

  My husband has a computer on which the Firewall works, can I just copy the folder more or what I need to back up and reinstall Windows 7?

  Hello Kiwipon_CC,

  Do you have any other software installed that contains a firewall?  How long have you had this problem and have you made changes to your front the computer this error?  You have installed new software before it happens?

  Firstly, I would like to launch a full analysis of the software removal antivirus and malware, you have already done.  I would then run a SFC scan to see if it can fix this problem.

  SFC: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 7

  http://support.Microsoft.com/kb/929833

  Please let us know status.  In addition, please see the link below.

  Windows Firewall problem:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/0f4f6e47-afd3-45c7-8182-9487595270b1/