Cannot start the computer in normal layout updated installation in loop.

Similar Questions

• Cannot start the computer with DISPLAY of ERROR: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102,

  last time I connect, the NTFS has been runs a check and then close my computer with a SCREEN of ERROR and the COMMAND SCREEN CHECK BONES. All the time when I used the F8 key, it has not started safe mode and all. When I used F10 and F12... He made a QUICK and FULL TEST and said my hard drive 'PASS'... but no way to start the computer. The DISPLAY of ERROR says:

  --------

  Disable or uninstall an anti-virus, backup utility disk defragmentation. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  Stop: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102, 0 x)

  ------

  Help, please! as I have not set up disk or CHKDSK with me. granted access via another computer. My question is: can I download a service pack 3 or installation to start XP Professional, on a USB to do - turn off the anti-virus, backup utility, disk defragmentation?

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/windows-xp-startup-error-stop-0x00000024/a15138c6-4be1-483d-b6db-e9d8db853d5b

• cannot start the computer

  Have a Dell 4600 and can not start the computer, white screen Dale may

  "d_may" wrote in message News: * e-mail address is removed from the privacy * .com...

  Have a Dell 4600 and can not start the computer, white screen Dale may

  OK, what happens when you press the power button?  The computer turns on, do you hear the hard drive and fans spin? White screen tells us nothing.  Do you see the Dell screen initially, bios information, of any part of the logo of starting Windows or the process?

• cannot start the computer without disconnecting the graphics card

  I'm having a strange problem.

  Recently my computer has started doing something funny.  If I choose restart, or stop and start the computer too fast, it does not start.  He posts about 3 times then won't start.  If I unplug the graphic card and let the beep from the motherboard error on the code, and then close it, plug it back and it starts.  It's really weird and I don't know where to start troubleshooting.

  Here are my system specs:

  OS: Vista 64

  Processor: Intel Core 2 Quad Q6600 @ 2.40 GHz (4CPU), "2.4 GHz

  Motherboard: Biostar T-Power I45

  Graphics card: NVidia GE Force 9800 GX2

  Any help would be great because I just had to reinstall windows, and there restart every time I install a program, and with this error it takes me about 10 minutes to start again.

  Thank you!

  Hello

  You've got a video that can interfere? Settings/Setup (BIOS/CMOS) often as F2
  you start so watch the screen for the key. Disable the integrated video if activated.

  If it does not help it sounds like you need technical support in a real store of the computer (not leeks and)
  Displays a BestBuy or some other BigBox store) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot start the computer (error hal.dll)

  Hi, I use Windows xp and when it loads, it says:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll
  Please reinstall a copy of the top of the queue.

  I have the original Windows xp cd and when I boot from the cd the blue screen comes up saying "Windows Setup".
  It automatically start doing something and then he stuck to "ACPI Plug & Play bus driver. Stucks HE there for a while and when it ends, I got an error message that says: "file acpi.sys cause unexpected error (32768) to 5964 in d:\xpsprtm\base\boot\setup\setup.c line."

  And when I press any button it just restarts the computer and it makes a loop in this way.
  And by the way, safe mode and all the other modes do not work, I get the same error for hal.dll, and I can't reach the office.

  Help, please!

  UPDATE: this time I received the error "acpi.sys file caused...". "now, I got that it's corrupted.

  It is extremely unlikely that the hal.dll file is missing or damaged.

  It is extremely likely that XP just cannot find the file.

  I have no idea what you have tried so far things - have you tried to do a repair installation?

  For this error, I first start in the XP Recovery Console (by pressing 'R' of your bootable CD) and run chkdsk /r on your system and then see how things appear after that, but try this notice from the Support Engineer and see how it works.

  If you can't get into the Recovery Console any CD you or you are not sure what type of bootable media you have, you should make a bootable CD from the Console of the Recovery XP (no XP media required) and do not forget what you have.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

• start the computer in normal mode with settings in safe mode

  I restarted my computer from malwarebyes in safe mode and when he started he uses in normal safe mode settings. I tried to use the last good settings and she didn't date there. no old parameters. No idea how to get back to normal settings?

  You can either restore your system to a previous state.
  If this does not work, have to "msconfig" (run-> msconfig)
  In the new window, in the "general" tab, you can see three options like normal startup, diagnostic and selective upward.
  Select normal startup. then restart apply.and.
  That's all.

  Thank you.

• Incomplete downloads, now we cannot start the computer on the rise

  Laptop my daughter (under Vista) have not completely downloaded updates.  Now, we get the screen "windows did not shut down correctly ' when turned on.  However, no matter what option is selected, we get just a black screen.  We no longer have any of the computer came with the backup disks.  How do we get this laptop to start?

  Hi when mine crashed recently I borrowed a full win7 disc to get to a command prompt to recover my data... a complete win vista disk could repair your operating system if you can get your hands on an andwith Imgburn http://forum.imgburn.com/index.php?showtopic=11194 you might be able to put your right (I have never tried (, but you might want to..) see you soon and good luck.

  PS, you could have the recovery on your computer disk in a hidden partition. If you could travel in this avenue...

• off frequency message error when start the computer in normal mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hey pamyres

  you say not what led to what happens

  You must give information here to get help

  try a restore of the system in safe mode before your problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• Error message when starting the computer in normal mode: btdna.exe

  I get this error during start-up:

  WSA startup failed or if you have the wrong version of the installed Winsock.

  I tried the command prompt, run as an administrator and reset but it not taken care of the problem.  Help, please!

  Hi Amy Shane,.

  Welcome to the Windows Vista answers Forum!

  You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Step 2: Manually remove BitTorrent from the PC

  1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.

  2. go to the processtab.

  3. search btdna.exe and right-click on it.

  4. Select end process.

  5. click Yes when the warning sign is displayed.

  6. close Task Manager.

  7 Click Start then start search

  8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.

  9. use the search function for all other instances of btdna and also remove them.

  If you are prompted to restart the computer, then restart and reinstall the btdna.exe.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Cannot start the computer after Virus infection

  Hello
  I fixed with a virus program all viruses on my laptop, and of course I deleted one is infected.

  When I rebooted my laptop that the engine was told that autocheck was not found and I want to skip this task.

  After that, I come to the xp-connection (I've never seen before) showing my user name in the user field and asks me to put a password. (I've not due to the fact that I've never used it)

  If I just go along to a click on OK without putting a password the laptop starts up (with the corresponding music) and stops after a few seconds.

  Finally I got to the same place, I described at the beginning.

  Thanks for helping me...
  costachicca

  PS: would be nice if a person speaks German could respond to this topic, so I really understand.

  Hello

  First the form of Toshiba standard language is English and all ads that are written in other languages will be erase.

  Now on your problem: he s strange! Have you tried to boot the operating system in safe mode? You can start the operating system in safe mode by pressing the F8 key so the unit to boot.
  Then you can try to check the system.
  If this procedure doesn't work, well in my opinion the easiest workaround is to recover the OS with the supplied restore CD.

  Hope it of understandable for you and I hope that these tips will help you

  Good bye

• Qosmio X 500 - 10V - cannot start the computer

  Hello!

  There also German support? :)

  I have this problem: (click on the link, because I did a handymovie)
  http://www.file-upload.NET/Download-3190766/video-2011-01-29-03-05-48.WMV.html

  Can someone me a know this problem?

  THX!

  Hi juergenp,

  Here it s an international forum for the user to so there is only English support, but I put t think that it s a problem to understand the English language ;)

  In any case, I watched your video and your computer can t start correctly, it gives you just a certain code of beep.
  These beep codes mean that there is a hardware malfunction detected.

  Theoretically, it could be the RAM to malfunction. So if you have two modules of RAM installed, test it with a module only and this module in each slot to make sure that it s not a RAM slot problem itself.

  In the worst cases, another part is related as the motherboard or something else. In this case, you should contact a service provider authorized in your country. Guys can you help you get rid of this problem if your laptop is under warranty, the repair would be free. :)

• Cannot defragment the hard drive AND cannot start the computer in safe mode

  I have been unable to defragment my hard drive because it tells me that chkdsk /f planned.  I tried manually works in command mode nothing works.  I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there.  What I'm doing wrong and what I can do differently?

  If you try to defragment a volume and see a message like this:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
  Please run Chkdsk /f.

  This means that the volume (disk) that you want to defragment was marked 'dirty' XP.

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.

  You can click on start, run and enter in the box:

  Chkdsk /r

  Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).

  If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.

• Blue Screen BAD_POOL_CALLER cannot start the laptop after Windows XP updates

  My user has a Dell Latitude E6500 and after installing Windows Update, the laptop does not start in Windows XP.  Tried to repair, reinstall all Modes and each option we just get error BAD_POOL_CALLER not boot into the operating system.

  Reference Dell it's a software problem, probably caused by the update as no other changes have been made to the laptop.  Before we pay for Dell support software means someone has suggestions?  All options on Googling guess you can enter Windows in at least secure Mode that we can not so I'm stuck!

  See you soon

  See this article for some real good troubleshooting Info:

  0X000000C2: BAD_POOL_CALLER
  http://aumha.org/a/stop.htm

  Also:

  How can I solve this? (bad_pool_caller)?
  http://www.Tek-Tips.com/viewthread.cfm?QID=423270

• Cannot start the computer. Don't exceed HP screen

  I have a desktop HP Pavilion running Vista. I used it all weekend, but last night the keyboard would not work. The mouse worked, but not the keyboard. I tried to restart and now it won't start at all. It goes to the HP screen and stops. I tried to make an ISO bootable recovery disk, but it just goes to the HP screen and stops. Someone at - it suggestions?

  The keyboard does not always work. I tried holding f8 it starts without success.

  Thank you.

  Hello

  Sounds like hardware issues so you need the help of a real computer store (no leeks and peaks at)
  a BestBuy or other BigBox stores) or HP support.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.