Cannot start the EM Console

Similar Questions

• Cannot start the Recovery Console Windows from the installation CD

  On my MacBook I ve running in VMware Fusion 3.0.1 a Virtual Machine with Win XP Pro.

  When I reboot Win XP Pro and start again from the Windows XP Pro installation CD, I can see the "Welcome" with the menu screen

  -To install Win XP now, press ENTER

  -To repair an installation of Windows XP using the Recovery Console, press r.

  -To quit Setup without installing Windows XP, press F3.

  When I click ENTER or R, I see the message

  -The installation program did not find any hard drives installed in your computer. Setup cannot continue. To quit Setup, press F3.

  Today the question? In the 40 GB of the virtual machine, I have two free partitions of 10 GB and 20 GB Win XP Pro execution. Why see Setup cannot process this partition?

  I ve also installed a second Virtual Machine, but the installation of VMware Fusion not show the "Welcome" screen, but it installs both Win XP Pro.

  The installation of the recovery in the virtual race Machine Win XP Pro Console is successful, but when I start the recovery in Start Menu Console, just the screen blue 0x7B (inaccessible boot device).

  What must I do, to start the Recovery Console in VMware Fusion? Or another question: when merging does support the Windows Recovery Console?

  Wow, nothing indicates that you use a German version of Fusion that your English is excellent.  Anyway as VMware headquarters is in the United States, like me, I always provide information in English and information-specific guidelines in the VMware Fusion help files come from the English version as well as any Documentation from VMware that I reference.  I say this next part as a general and not directed comment towards you, as you have noted your using the German version... Any person requesting help must always at least include technical information referencing manufacture, make, model, version, and language other then English, material goods and software involved in issues.  We'll find a good reference for the type of information that must always be included in HOWTO: ask (and answer) Questions.

  As a much get into the BIOS if you use the Fusion 3, you don't need to enter the BIOS to change the boot device as this can be done in the settings now however to enter the BIOS for other things that need/want of press you F2 directly after starting the Virtual Machine and after having clicked on the screen but the av VM boot so fast that it's easily missed.  You can add the following settings to the file of configuration .vmx of the Virtual Machine to slow down the startup so that force once in the BIOS.

  bios.bootDelay = "3000"
  bios.forceSetupOnce = "TRUE"
  

  The bios.bootDelay is in milliseconds and the bios.forceSetupOnce Boolean value is then set to FALSE, automatically.  Each of these parameters are independent of each other.

  You can find the following useful notes for this and or other uses...

  ====================

  Notes: keyboard

  Different setting function, you may need to adjust various preferences keyboard to work with the function keys and or use the Fn key.

  OS X > you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  Merger 1 > VMware Fusion (menu) > Preferences... > keyboard and mouse > activate Mac OS shortcuts keyboard

  Fusion of the 2 and 3 > VMware Fusion (menu) > Preferences... > keyboard & mouse > Mac OS shortcuts > activate Mac OS keyboard shortcuts

  ====================

  Notes: Starting the virtual machine from CD/DVD or ISO Image

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  ====================

  Notes: By modifying the .vmx file

  For Fusion 2.x and 3.x ctrl-click the target entry of Virtual Machine on the windows of the library of the Virtual Machine and choose Show in Finder and then Ctrl-click on the packaging of the Virtual Machine and select to display the contents of the package.

  By default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  ====================

  Notes: Creating an ISO Image of the CD/DVD drive

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

• Keyboard will not work to start the Recovery Console repair function

  I would like to use the repair feature in Windows XP Professional Recovery Console when starting Onboard or USB CD-ROM drive.  My keyboard works very well to enable F12 and select boot device.  Windows Setup starts and then loads bunch of pilots - looking... but then my keyboard won't work for select 'R' to start the Recovery Console repair.  All this started because I uninstalled a Lexmark printer and it seems that the driver Lexmark LXBTtime.dll lack now but still wants Windows to start.   So now Config\System will not load.  I saw some threads in this forum recommend that my wireless keyboard does not work - so I borrowed a USB wired keyboard - but still the same problem.  Cannot select 'R' - the keyboard light turns off and of course not recognised by Windows Setup.  Any ideas or suggestions?  In addition to the purchase of a MAC (it was my suggestion of neighbors :-)   Thanks for the review!

  Hello

  In addition to the suggestion of Daavee I would also ask you try another disk of Windows XP installation and also you can try with a keyboard five General PIN and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PROTECTED 2010 cannot start the Slimline Combo drive

  Hello

  I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

  A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

  Both computers are running Windows XP 2nd edition.

  ????

  Thank you

  Best regards
  Anne Mette Voss

  Hello

  Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
  Hmm I think I have an idea.
  I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
  Reboot the laptop.

  After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

  Good luck

• Cannot start the DSC Shared Memory

  I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

  I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

  Thank you!

  Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• Cannot start the network connection: invalid access to memory location

  Hi team,

  Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

  Thank you

  Sangaré

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• PC will not boot or start the recovery console

  Windows XP 2004

  AMD Athlon XP 3000 +.

  AVG 8.0

  My friend tried to jailbreak his ipod. Now his PC will not boot the OS. It will go to the screen with the options to choose each time you start upward into the safe, normally last good known etc.. Choose one of these options results when control of the PC for the IDE drives and soon after an accident to return to the screen that says "a problem has been detected and Windows has shut down to prevent damage to your computer." I try to start the recovery console, but then I get a blue screen that gives the same spiel, then this Stop error message:

  STOP: 0X0000007B (0XF79BA524, 0XC0000034, 0X00000000, 0X00000000).

  In addition, I changed the boot order in BIOS and tried to use the recovery through an ISO boot console. He ends up crashing this first screen appeared. Even if the BONE is fatal, these guys really want to the GET data out of their hard drive.

  Thank you.

  http://support.Microsoft.com/kb/316401

  http://support.Microsoft.com/kb/324103

  Or, if you just want to back up your data and do a clean install:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• I cannot start the Windows Firewall, I get an error 0x6D9 code

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  Original title: error 0x6D9 Code

  I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

  Thank you.

  1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.

  2. you do not do so in respect of the services? You do it in this way? ...............

  Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...

  under status, it lies and must say... Has begun

  under Type of status, it must be said... Automatic

  If it does not say that, right click on Windows Firewall > properties...

  in Startup Type, click on the pointer, and then select Auto

  to the service status, click Start

  Click OK when finished.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• iDrac6 - cannot start the virtual iso file:

  I just bought 12 x T610 I put in all the country. I know I could call the support for this, but I tried and there is no knowledge on this subject was available when I called the support:

  The problem: I'm unable to boot from the virtual media (iso file)

  I don't know how to do this, but I understand that I need to start the remote console and select virtual media > launch virtual media.

  Next, I add the iso file I want to boot from.

  I tried to start it, but it does not work.

  When I try to map the drive (still in the launch of virtual media), I get the error:
  Disk error
  Or other virtual media is detached or
  Redirection of virtual media for the selected virtual disk drive is already in use.

  I tried this from dozens of different computers and it is not going.

  As first boot device, I tried Virtual CD/DVD/ISO, but it didn't go.

  So. How do I file to mount the ISO and boot on them? IDRAC is loaded from another server using IE8 on the same subnet as the server that I am trying to start (gigabit). The iso file boots very well when mounted using vmware etc. (190 MB)

  I found the solution from dell support:

  I had to open idrac. go to system > console/media, and then click configuration and activate the virtual support.

  I thought that I had already checked this, and the cause is iDRAC has a blue for the active tab text, and black for the tab you are NOT in.

  Example:

  Redirection of the console and Virtual Media

  Configuration

  While Configuration is NOT active! You must click on Configuration, even if it is not marked as a link. Blade programmers :)

• Cannot start the peer name resolution protocol Protocol

  No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»

  I still have unresolved problems with backups, so I don't want a new installation of windows.
  I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?
  Thanks for your help.

  Hello

  Please keep us updated.

  You can read the articles below and see if it helps:

   

  Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

   

  Share files via public folders

  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  If you need further assistance, please answer and we will be happy to help you.