Cannot start the oracle Listener
Hello, please help me on my Oracle 11 g listenerThe system configuration:
Windows Vista Ultimate 32 bit
User: sys as sysdba
Password: *.
SID: Green
Host: Greensword
I installed the database Oracle 2 months back this time, tthat it was workiing fine I could connect it and very well.
But now when I try to connect it says no listener
+++ I tried to do tnsping
------------------------------------------------------------------------------------------------------------------
C:\ > tnsping Green
AMT Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 24-JUL-2
009 23:49:12
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Use settings files:
C:\app\WarLock\product\11.1.0\db_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) GreenSword) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = green)))
AMT-12541: TNS:no listener
------------------------------------------------------------------------------------------------------------------
+++ Also check the status of the listener
------------------------------------------------------------------------------------------------------------------
C:\ > lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on July 24, 2009 23:49
: 47
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
32-bit Windows error: 2: no such file or directory
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=GreenSword) (PORT = 1521)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
32-bit Windows error: 61: unknown error
------------------------------------------------------------------------------------------------------------------
+++ To save the listener.ora and tnsname.ora content
------------------------------------------------------------------------------------------------------------------
listener.ora # Network Configuration file: C:\app\WarLock\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) GreenSword)
)
)
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
tnsnames.ora # Network Configuration file: C:\app\WarLock\product\11.1.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
GREEN =.
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) GreenSword)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = green)
)
)
------------------------------------------------------------------------------------------------------------------
+++ Also when I do netca to configure the TNS on command prompt it gives me
------------------------------------------------------------------------------------------------------------------
C:\ > netca
IOException: Cannot save NetProperties: C:\app\WarLock\product\11.1.0\db_1\netw
ork\tools\NetProperties (access is denied)
Oracle Net Services Configuration:
C:\app\WarLock\product\11.1.0\db_1\network\admin\sqlnet09072512AM0452.bak (access
s is denied)
C:\app\WarLock\product\11.1.0\db_1\network\admin\listener09072512AM0452.bak (Acc
ESS is denied)
C:\app\WarLock\product\11.1.0\db_1\network\admin\tnsnames09072512AM0452.bak (Acc
ESS is denied)
------------------------------------------------------------------------------------------------------------------
He also do not allow me to start my service TNS of administrative services-> services
------------------------------------------------------------------------------------------------------------------
Please help me with this * 888
Microsoft loopback problem?
The cause is BONE & associated network.
Tags: Database
Similar Questions
-
start the Oracle listener on openSuse
How can I configure oracle listener to be launched at startup on openSuse (11.3)?
I use Oracle 11 g R2You can set up a script to ensure its startup time is started:
The startup script would be enough to ensure the ORACLE_HOME is located in the path, and then you must issue: lsnrctl start command.
Similarly, with a stop script, make sure the path and lsnrctl stop.
Kind regards
D
-
Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL
Hello
I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
, I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
Rgds,
ThiruHave you reviewed these docs?
CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]Thank you
Hussein -
OEM12c - failed to start the Oracle Management Server.
I can't start the Oracle Management Server.
The file referenced on has not been updated since October 6th, I joined this EMGC_OMS1 file.
The 12.1 database is on a separate server. The database and listener are on the rise.
No matter what I put the results are the same.
(Q) what are the correct environment variables to set?
(Q) Comment can I start up the Oracle Enterprise Manager 12 c?
I tried this command $OMS_HOME/bin/emctl start SGD
With the House of WHO defined as:
$ echo $OMS_HOME
/ u01/app/oracle/product/entmgr/mwhome_1/WHO
$ $OMS_HOME/bin/emctl start SGD
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
From Oracle Management Server...
Departure WebTier...
WebTier started successfully
Management Server Oracle could not be started
Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Management Server Oracle is down
And
I tried to run the. ./setWLSEnv.sh
CD/u01/app/oracle/product/entmgr/mwhome_1/who/bin
Then run:
$. / emctl start SGD
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
From Oracle Management Server...
Departure WebTier...
WebTier started successfully
Management Server Oracle could not be started
Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Management Server Oracle is down
OEM 12 c SGD server.
$ uname - a
SunOS 5.10 zone6-03 Generic_150400-03 sun4v sparc sun4v
Database server:
$ uname - a
SunOS 5.10 zone5-03 Generic_150400-03 sun4v sparc sun4v
$ export AGENT_HOME=/u01/app/oracle/agents/core/12.1.0.4.0
$ export ORACLE_HOME=/u01/app/oracle/product/12.1.0/dbhome_1
$ export PATH = $ORACLE_HOME/perl/bin: $ORACLE_HOME/bin: / usr/bin: / usr/sbin: $ORACLE_HOME/appsutil/jre/bin: / bin: / usr/bin / X 11: / usr/local/bin: / usr/kerberos/bin: / usr/local/bin: / bin: / usr/bin: / home/oracle/bin:.
$ export ORACLE_SID = emg1
$ sqlplus / as sysdba
SQL > select * from v$ instance;
1 emg1 zone5-03 12.1.0.1.0 6 October 14 OPEN NO 1 ORDER
NO NORMAL PRIMARY_INSTANCE ASSETS ALLOWED NO REGULAR EE 0
The listener is in place: version is for Solaris LSNRCTL: Version 12.1.0.1.0
The Agent is running.
Newspapers/u01/app/oracle/product/entmgr/mwhome_1/logs as wlst_20141008110202.log
Last login: Tuesday, October 7, 14:58:25 2014 of 10.122.60.160
Oracle Corporation SunOS 5.10 generic Patch January 2005
$ export OMS_HOME = / u01/app/oracle/product/entmgr/mwhome_1/who
$ $OMS_HOME/bin/emctl start SGD
Oracle Enterprise Manager Cloud control 12 c Release 4
Copyright (c) 1996, 2014 Oracle Corporation. All rights reserved.
From Oracle Management Server...
Departure WebTier...
WebTier started successfully
Management Server Oracle could not be started
Check the log file MS Server for more information: /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Management Server Oracle is down
$ ls - ltr /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
-rw - r - 1 oracle oinstall 19060 6 Oct 21:45 /u01/app/oracle/product/entmgr/gc_inst/user_projects/domains/GCDomain/servers/EMGC_OMS1/logs/EMGC_OMS1.out
Note the EMGC_OMS1.out newspaper do not updated.
Thank you
Paul
Hi Paul,.
(1) Env variables for who.
$ORACLE_HOME/bin/emctl is a shell script which handles to define the variables of approx.
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOMEWe use below
unset TWO_TASK
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
PATH = $HOME/bin: / usr/bin: / usr/sbin: / bin: / usr/ccs/bin: $ORACLE_HOME/bin. export PATH
ORACLE_INSTANCE = / oracle/product/gc_inst/WebTierIH1; export ORACLE_INSTANCE
ORA_TZFILE=$ORACLE_HOME/oracore/zoneinfo/timezlrg.dat; Export ORA_TZFILE2.) steps to start SGD
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
Starting at $ORACLE_HOME/bin/emctl SGDor
CD $ORACLE_HOME/bin
. / emctl start SGD
or
ORACLE_HOME = / oracle/product/middleware/who; Export ORACLE_HOME
$PATH = path: $ORACLE_HOME/bin. export PATHemctl start SGD
Kind regards
RAM.
-
PROTECTED 2010 cannot start the Slimline Combo drive
Hello
I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.
A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.
Both computers are running Windows XP 2nd edition.
????
Thank you
Best regards
Anne Mette VossHello
Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
Hmm I think I have an idea.
I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
Reboot the laptop.After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!
Good luck
-
Cannot start the DSC Shared Memory
I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.
I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.
Thank you!
Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...
-
original title: Halo 2 for windows vista
Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer. It will not work in single user either...
Hello
Plase make sure you have the latest version of the GFWL Client installed:
http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx
-
Cannot start the network connection: invalid access to memory location
Hi team,
Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location. Can you help me on this issue?
Thank you
Sangaré
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?
Hi jdmanel,
NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Follow the steps in the article.
You cannot start the Windows Firewall service in Windows XP SP2
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
For reference:
How to manually open ports in Internet Connection Firewall in Windows XP
-
How can I solve unless I need to have this problem to download protection software.
Hi Octavia10,-What version of service pack of Windows XP you are using?Try the methods listed in the given article to resolve this problem:Note: The steps are applicable to the other version of Windows XP as well. -
I cannot start the Windows Firewall, I get an error 0x6D9 code
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.
2. you do not do so in respect of the services? You do it in this way? ...............
Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...
under status, it lies and must say... Has begun
under Type of status, it must be said... Automatic
If it does not say that, right click on Windows Firewall > properties...
in Startup Type, click on the pointer, and then select Auto
to the service status, click Start
Click OK when finished.
-
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
These error messages are a pain in the neck to extract useful information.
I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.
If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.
Realtek and NVIDIA, for example get stuff good free audio driver.
If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period
-
Windows cannot start the firewall service.
Original title: my firewall stopped working and it won't let me turn it back on.
My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?
Hey, bed,.
File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.
Information available at:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot start the peer name resolution protocol Protocol
No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»
I still have unresolved problems with backups, so I don't want a new installation of windows.I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?Thanks for your help.Hello
Please keep us updated.
You can read the articles below and see if it helps:
Add a device or computer to a network
http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
Share files via public folders
http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders
If you need further assistance, please answer and we will be happy to help you.
-
Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service
Windows cannot start the Diagnostic Policy on Local Computer Service?
Original title: error 1079
Hi Craig,.
Thanks for posting your question in the Microsoft Community.
From your post, it seems you are getting and error 1079.
The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.
What service are you trying to start?
We will follow the steps in this link and check if this solves the problem.
Thanks for posting the result and let us know if you need help on Windows.
Maybe you are looking for
-
H8-1309eb HP: Please help
Hello I have e hp h8-1309eb want to put too much new grapp.msi gtx 970 games 4 g change the power supply or not? change the other things? Sorry for the bad English...
-
I have haveover 370 security updates should I still all the 'old' 2 years ago
should I updaates installed 2 years ago
-
BlackBerry Smartphones cannot clear icon mail received
I have an icon that I have two unread e-mails on my home screen "BOLD", but after two days of search and to erase all messages in unopenned, the icon is still there. How can I delete it?
-
BlackBerry Smartphones to see limited emails and phone numbers
It's the second time this has happen to me and don't know what I did to correct, caused much less. I see a limited number of emails even though I have others, as when you look at the last phone numbers I asked or received, I do not see everything now
-
Questions PDF with Microsoft Publisher 2016
I produced a newsletter since early June 2016 using Microsoft Publisher Windows 10. It prints perfect and the PDF file printed perfectly until yesterday. Now, if I import an image with a white background and click the new color, and then select the