Cannot start the Turbo Boost technology driver

I use a notebook of 3085 dv7. When troubleshooting one alert on the Intel Turbo Boost Technology driver, he said he "cannot start (code 10)". I've updated the file of the driver from the HP website, but it looks the same driver and does not resolve the alert.

I am running windows 7 64-bit with an Intel i7. Any suggestions? I guess he can help performance if it is functional, but not sure.

Hi, if the laptop is a Dv7-3085dx with a Core i7-720QM, it does not support the driver of turbo-boost. I don't know why they named driver turbo-boost and also why it is listed as a pilot for the Core i7 processors first generation. This is for processors with integrated graphics chips (Sandy Bridge?). You don't have to bother with the driver, uninstall it because it does not work on your laptop...

Tags: Notebooks

Similar Questions

  • Satellite L750-1PH - how to activate the Turbo Boost technology?

    Hello

    I want to activate the * Turbo Boost technology *. But I don't know how.
    And the fan makes a lot of noise and hot air of spit.

    I will be very happy if you could help me :(((

    Thank you
    Best regards
    * Bahad? r ACAR

    You have Intel Core i7-2670QM processor and this processor supports Intel® Turbo Boost technology 2.0

    These features of the CPU can be enabled and disabled in the BIOS. But just in case where this option is available in the BIOS.
    When this option isn't available, you will not be able to put ON or OFF

  • HP g62-a60EM Intel Turbo Boost Technology driver problem

    Hello!

    When I try to install HP drivers & driver Intel Turbo Boost Technology from the solution page I get this error: this computer does not meet the minimum requirements for installing the software.

    Can you help me with the solution how to fix this? Before I changed my operating system from Windows 7 Professional (64 bit) - English to Windows 7 Professional (64 bit) - Slovenian, I had no problem.

    Sorry for my bad English.

    Kind regards

    Dragan

    dmarinov,

    Short answer is that you need not the driver.  The pilot is planned for notebook computers using the same processor but the only Integrated GPU.  Given that your PC has to a discrete GPU (ATI), the pilot of the CTA is unnecessary.

    -wes

  • Intel Turbo Boost Technology driver

    Driver Intel Turbo Boost Technology im trying to install one on my laptop. HP g72b60us but error shows.

    This computer does not meet the minimum requirements for installing the software.

    It is said on the part of system requirements

    System requirements:no additional prerequisite

    How is this error pops up?

    juriel0624 wrote:

    same error pops up

    Hello

    Your CPU does not support! The driver turbo boost has been designed for the CPU with integrated graphics processor. I don't know why, we have the driver on the support Web site. I tried as well but found out that it is not for my CPU (Core i7-720QM)...

  • Satellite L735 - cannot start the backup of HARD drive

    Hello

    I want to buy a new HDD in my laptop a L735. Before doing this, but I need to back up the windows installation files. Whenever I try to do a backup, but it does not allow me and a message appears on the screen saying that it is not possible. Here's a screenshot of it:

    http://img694.imageshack.us/img694/7088/screennv.PNG

    Could someone help me with this please?

    Kind regards
    Darren

    >... I need to back up the windows installation files
    What you try to do is not the Windows installation files back up but the creation of recovery disks.
    For some reason of original Toshiba recovery image cannot be found or detected on the HARD drive. I don t know what that you did, but it can happen if hidden recovery partition is deleted or partition structure has been changed.

    Do you have more questions?

  • Turbo Boost technology

    Hello!

    I tried to install the Intel Turbo Boost technology, but I get this error: this computer does not meet the minimum requirements for installing the software.

    I also hade installed Turbo Boost Technology monitor, but the Turbo Boost technology doesn't seem to work.

    My computer is a HP probook 470 G1 with Windows 7 Professional (64-bit6) (CPU 2 .2GHz) and Turbo Boost technology should be available.

    The computer is very slow from the start, and I don't see any turbo boost event.

    Could you please help me to check if the Turbo Boost technology is enabled and how do I install the Turbo Boost technology on my laptop?

    Best regards

    Keyvan

    It is for the HP consumer support forum.

    Your laptop is a product of trade.

    You would be better served by joining the HP Enterprise Business forum and post your question there. I have provided a link below.

    http://h30499.www3.HP.com/

  • How to check technology Turbo Boost on X 51 R3 i6700 CPU 4.0 GHz with Turbo Boost technology

    Hi guys,.

    I'm new to the forum and I hope to find and answer quickly.

    I bought a X 51 R3 i6700 CPU 4.0 GHz with system about two months of the Turbo Boost technology. The invoice indicates i6700 CPU 4.0 GHz with Turbo Boost technology. The information system indicates 3.4 GHz, no mention of the Turbo Boost technology. The BIOS also indicates 3.4 GHz and no mention of the Turbo Boost technology.

    I've scoured the internet for where this Turbo Boost technology can be reported in the system but found nothing. Anyone with a X 51 R3 system knows where this Turbo Boost technology can be declared the system?

    I read that some people want to turn off. Crikey! How am I guess even turn on or off when I don't even know if I have it.

    Thanks to all those who are trying to help me. A screenshot would also be nice.

    MrOtto

    Turbo Boost 2.0 technology is integrated into all processors of Intel i7-6700.

    In the first link, there are many listed and incorporated technology this processor. Just because they are not mentioned in the BIOS, this does not mean they do not exist or are not active.

  • PROTECTED 2010 cannot start the Slimline Combo drive

    Hello

    I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.

    A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.

    Both computers are running Windows XP 2nd edition.

    ????

    Thank you

    Best regards
    Anne Mette Voss

    Hello

    Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
    Hmm I think I have an idea.
    I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
    Reboot the laptop.

    After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!

    Good luck

  • Driver Intel Turbo Boost Technology (taken from HP's Support site)

    Hello Forum members!

    OK, so roll with me here! I have a HP G62-149WM I upgraded to it is (out of the box) Windows 7 Home Premium 64 Bit for Windows 8.1 Pro 64 Bit... Then I went into page HP driver download to install the Turbo Boost driver well, as you know, it basically requires you to type in your model, you choose what operating system runs your make and model, and then it shows all the different drivers, right? So my question now is because it does not show 8.1 Windows as an operating system option, the Turbo Boost driver always works on my 8.1 win even if it was made on a technical level to work on Win 7? Thank you in advance for your time and your help in this matter!

    Ron

    Hello @ronnieron ,

    Welcome to the HP Forums!

    Unfortunately, this has not appeared to get coverage Windows 8.1 with respect to the drivers. You can try to install the Windows 7 driver, which might work, but it probably does not work well, or not at all.

    Here's the driver page, in case it becomes necessary: Drivers of laptop HP G62-149WM

    Please let me know if you have any questions or concerns. Thank you!

    Mario

  • Satellite L655-11J - disabling Intel Turbo Boost Technology for heat

    My temp Satellite L655-11J used to be under full load of cpu 75 now, it's about 80 ~ 85 maybe because of the heat wave, I don't know

    I disabled the Intel Turbo Boost technology and its high value at full load is now about 68 ~ 69 and the laptop is not hot at all, and I did not notice a difference in performance, so you should try it if your laptop gets hot

    My question is there utility to disable through windows?

    null

    > My question is there utility to disable through windows?

    Usually, this must be done in the BIOS.
    But as far as I know Toshiba offer a tool called Toshiba HWSetup located in all programs-> Toshiba.
    This software allows you to change some settings in the BIOS Windows System.

    I m not very good if you the Intel Turbo Boost Technology options are available in the HWSetup utility, but you can check it otherwise you will have to change the settings in the BIOS

  • Cannot start the DSC Shared Memory

    I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

    I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

    Thank you!

    Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Intel Turbo Boost Technology Monitor 2.0 has stopped working

    What this means and why do I need it.  There is no instructions on how to restart the Intel Turbo Boost Technology Monitor 2.0

    The program indicator appears on my screen and will not remove or it will switch to another position.  AND she will not close. That is what it is?

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Method 1: Perform the steps in the article mentioned below and check if the problem persists.

    http://communities.Intel.com/thread/23562

    Method 2: If the problem persists, contact the support of the intel to get help.

    http://www.Intel.com/p/en_US/support?IID=HDR+support

    Hope this information helps.

  • Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

    Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

    My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

    Base engine
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

    Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

    Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

    Two applications load mode safe mode with setting in network or a clean boot?

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    If you test with another Windows user, have the same problem?

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  • HP ProBook 4530 s Turbo boost technology

    Ok. Hello, I bought a laptop Hp ProBook 4530 s with
    Intel Core i5 - 2450 M CPU @ 2.50 GHz, MHz 2494, how can I use the Turbo boost? On friends laptop Samsung is that a button of hp is not, then how do I use it?

    On the Intel site

    "Intel Turbo Boost Technology is usually enabled by default by a switch in the BIOS where you can turn on or off the operation. There is no other parameters controllable user to change how the Intel Turbo Boost technology. Once activated, the Intel Turbo Boost technology works automatically controlled by the operating system. »

    Read the FAQ on Intel Core processors to understand how works turbo technology boost and what it does.

    If you do not want to see when it is active, simply download and install the Intel Turbo Boost technology monitor utility.

Maybe you are looking for