Satellite L735 - cannot start the backup of HARD drive

Similar Questions

• L50 satellite will not start up - request password HARD drive

  Hello

  I hope someone can help me

  I have a laptop Toshiba Satellite L50 and when I start it, it says
  + no boot device please don't restart System.

  It is still under warranty because it was purchased only 6 months ago.
  I took it back where I bought it and they told me to contact Toshiba.

  I'm waiting on a reminder.
  I hope that someone can help you. He also asked that the HARD drive password.

  Where can I find this information?

  Hi Kym

  I guess the L50 Satellite cannot find the boot device (HARD drive), because the HARD drive was obtained with a drive password HARD and without this HARD isn't accessible disk password and the system does not start properly.

  Did you set this password for HARD drive in the past?
  I m request because this isn t password on new laptops. This HARD drive password can only be set by the owner of the laptop

  Of my knowledge if you know n t this HARD drive password, you will not be able to access the HARD disk in such a case, the HARD drive would be useless, and the data would be lost

  That's why I recommend you check if someone put the HARD drive on your laptop password where you n t know the password, you will need to replace the HARD drive and reinstall the system once more.

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Satellite A300-1MH - cannot start the eSATA external HARD disk drive

  When I connect eSATA disk HARD Satellite A300 is locked and the HARD drive is not detected. I tried to connect the HARD drive with both eSATA - SATA + USB power cable Cable when it is powered OFF with the same locked A300 result.
  Reloading utility chipset change anything.

  PS. on another computer same portable HARD drive works fine in both previous cases
  Thanks for the attention
  Fabio

  AFAIK, the chipset drivers are responsible for the usb, esata functions but you already reinstalled it. Have you tried to remove the chipset drivers in Device Manager and reinstall again? If still does not solve your problem, it may be the operating system itself. Using the preinstalled operating system or Windows disk?

• Satellite T130 - cannot start the Toshiba HDD recovery

  Hi all, I have a problem with my Satellite T130. I have to start the drive HARD Toshiba recovery but the computer tell me that is not a valid drive HARD recovery on the PC. It's probably a fault of my father. Is there another way to start the recovery?

  Thank you

  Hey Buddy,

  How are you trying to start the HARD drive recovery process?

  The full HARD drive recovery procedure is described here, so please check this article:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If it doesn't work your only option, you use the recovery media. Did you create this such as described in the user manual?

• Cannot restore the files from hard drive damaged in disk utility

  Questions

  1. can I save my files/fix this problem without having to restore via disk utility?

  2. What am I doing wrong / I can do to restore correctly on an external hard drive via disk utility?

  Background

  Last week when I turned my MacBook Pro 2012 I got stuck on the gray login screen. The progress bar moves very, very slowly and when he finished my laptop spontaneously restarted and repeated the same thing over and over again. Here's what I tried to do so far:

  -Start in SafeMode: does not work

  -Extended Apple Diagnostics/Apple Hardware Test: test results: no problem found

  -Utility (recovery and valorisation of the Internet) disk: disk hard Mac (Apple HDD) and Recovery (partition) HD are not damaged, but the partition disk0s2 is (created after a failure; a year not logged - if it matters) and in 'check' and 'fix' the latter I get inconsistent error messages.

  Disk utility error messages

  Most often, I get this error:

  The volume disk0s2 was found damaged and must be repaired. Error: This disc needs to be repaired. Click on the ERD.

  Stopped disk utility check "disk0s2."

  Disk0s2 volume could not be repaired after 3 attempts.

  Error: Disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your files packed around the top.

  I also received this error message once:

  Wrong number of extended attributes (it should be 730585 instead of 730589)

  Wrong number of access control lists (there are 1364 instead of 1368)

  Save the files to external hard drive?

  Before that I didn't even used/accessed Time Machine.  I have a new HDD external, formatted for Mac. I created two partitions: backup and Time Machine (so I can start using it once I have find this current issue). When I try to restore disk0s2 external hard disk I get an error restore failed (252 or 254, I think).

  When you drive is damaged, it is extremely difficult to make progress.

  I recommend the lessee a spare drive in an external enclosure and install MacOS on it again. Then boot from that and you are back in business. You can use the full power of Mac OS AND additional utilities to recover your files.

  More 350 000 files on your damaged disc are Mac OS - and those that can be installed in replicas of prefect by a new installation on a new drive. You can't Brute force 'all' copy of a damaged disc. What you want back damaged drive is not Mac OS X files - you want YOUR files. They are stored in the Directory/users in a folder with your short user name. with additional utilities, you can simply copy this directory, or use a recovery as data rescue program to get individual files.

• Satellite 1410: I forgot the password for HARD drive

  Hi Please help!

  I have toshiba satellite 1410 series...
  I think that the hard drive was full and it was locked.
  I really need to get to this unblock as im very new to comps. whenever I start my pc it ask me password for HARD drive...
  I need all the help to get this open

  Help, please

  Hello

  AFAIK, you need the old HARD drive password to clear the password disk HARD asking.
  If you have forgotten the password to disk so you don t have any other possibility to get into the HARD drive. In this case, the HARD disk is unusable and unfortunately you need a new HARD disk drive. :(

  Best regards

• Cannot read the old laptop hard drive attached again, says disk needs to be formatted

  Original title: hardware device

  I am trying to up load my old laptop the laptop to my new computer hard drive so that I can access my old files, but it is endlessly with need to format the new device this will clear all data? It only allows me to open the old hard drive at all? Please help I really need to have access to my old hard drive through my new laptop I have no other way to get the information out.

  Hello

  Yes if you format the drive it erases it's clean. Did you put the drive in the computer as the 2nd disc
  If the computer still starts off the coast of its original disk? It's easier to do on a desktop.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or another USB
  readers. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This can be done with the player in the)
  original laptop. If the drive is viable (not totally dead).

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------------------------------------------------

  The reader might have been damaged and may not be easily accessible. There are professional
  companies that can recover data off a dead drive if it is a costly process.
  Check with a real computer store (one that makes its own service in the House and no leeks)
  and displays a Best Buy or other stores) or system manufacturer support.

  I hope this helps.

• Satellite 2450-101 after the 60 GB HARD drive upgrade, made only to see 30 GB

  Hello world

  I'm new to this forum. I own a 2450-101, a little old man, real it´s, but still a very nice PC. Harman-Kardon louspeakers make it very useful for music.

  I would switch the HD, so I installed a new 60 GB (the maximum taken in charge, I said) and used the recovery CD.

  Everything worked perfectly, but it seems that only 30 GB can be seen by Windows. I heard, that I might need to update the BIOS. Mine is version 1.50.

  After a long search through sites Toshiba and the Inetrnet, I can only find updates the BIOS for the new models...

  only reference I've seen is on this page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000000b07, but

  Yet once I don't find Bios for my model.
  Please any help would be really appreciated ;)

  Hello

  You are right. This laptop is a bit old, but very nice. It provides performance enough for someone in need of this laptop only for everyday use.

  As for you statement about 60 GB of HARD drive. Well, I m a bit confused.
  How did you check the size of the HARD drive and why you say that it recognize only 30 GB?
  How did you check that? And you are sure that you have installed and 60 GB HARD drive?

  I recommend to check the size in disk management!

  With regard to the BIOS;
  The BIOS for this laptop is on the Toshiba driver page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There, you have to search in archive Archive Satellite Satellite 24xx Satellite 2450-101.
  As far as I know the BIOS 1.50 is available on the page!

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• Cannot open the USB external hard drive

  Original title: Hard drive

  I can't open the disk external hard usb and the device can see the list of devices and printer as 'USB to ATA/ATAPI Bridge '.

  Hello

  1. What is the exactly say by "device can see the list of devices and printer as"USB to ATA/ATAPI Bridge""?
  2. do you receive any error messages?
  3. did you of recent changes on the computer before this problem?
  4. were you able to open and use the external hard drive USB before?
  5. try to connect the external hard drive to a different USB port and check.
  6. are you able to access other USB devices with success?
  Method 1:
  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   
  Method 2:
  If the problem persists, try to uninstall and reinstall the USB controllers and check.
   

  (a) click Start, type Device Manager in the start search box and press enter.

  Bus USB controllers b) Expand .

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllers and then click Uninstall to remove it.

  step d) precedes the repeat for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  You can check the link for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, you can try to connect the hard drive to another computer and check.
   
  Let us know if it helps.

• Cannot start the Turbo Boost technology driver

  I use a notebook of 3085 dv7. When troubleshooting one alert on the Intel Turbo Boost Technology driver, he said he "cannot start (code 10)". I've updated the file of the driver from the HP website, but it looks the same driver and does not resolve the alert.

  I am running windows 7 64-bit with an Intel i7. Any suggestions? I guess he can help performance if it is functional, but not sure.

  Hi, if the laptop is a Dv7-3085dx with a Core i7-720QM, it does not support the driver of turbo-boost. I don't know why they named driver turbo-boost and also why it is listed as a pilot for the Core i7 processors first generation. This is for processors with integrated graphics chips (Sandy Bridge?). You don't have to bother with the driver, uninstall it because it does not work on your laptop...

• Satellite L300-110 and the upgrade of HARD drive

  I have Satellite L300-110 with 4 GB of RAM, and I want to improve its HARD drive of 160 GB SATA HARD drive for SATA 500 GB HARD drive.
  I just know is valid, and if not is 320 GB SATA HDD are valid?

  Appreciate your response.

  Yes, you can upgrade HARD drive on your Satellite with 500 GB SATA hard drive.

• Satellite 5200: Question on the differences of HARD drive.

  Hello
  my laptop HARD drive is damaged; and I would like to buy a new one. The problem is that I don't know what model of hard disk it is. Do someone know the difference between disk PA combat * and MK *?

  Thank you very much...

  Hello

  Well, as far as I know, it is a special part number identification but I put t found exactly the information.
  But I found a HARD drive that is compatible with this unit.
  It is s a 60 GB HDD, PA3306U part number - 1 H 60.

  Good bye

• Cannot set the password for hard drive on the W530 with Intel SSD 520

  Hello

  I have a w530 with an Intel SSD 520 in primary hard drive Bay. Whenever I try to set a password for the primary hard drive, it doesn't stick. If I chose master + user or simply user, I will enter the password, it will take the passwords without producing an error and then just dump back me to the screen of passwords while leaving the disabled hard drive password.

  BIOS is on the latest version for the w530 and SSD, the machine seems fairly normally operate differently.

  Does anyone have ideas how I can activate the password? Thank you!

  Hi, ctenorman

  I did some research and came across this thread of Intel. There are a few people in the thread who were able to set the password on this particular drive. It seems that changing the BIOS "SATA" compatibility mode, set the password, restart, and then change it to "AHCI" worked for some, but not all customers with this player.

  Good luck and let me know how it goes

  Adam