Cannot start windows, error, 193 Security Center service: 0xc1

I get the message, Windows Security Center service is turn off.

The pressing, turning on now, button, nothing happens.
Go to services, I get the error code 193: 0xc1

You maybe missing some services

Run it as an administrator. Copy and paste what happens here

Tags: Windows

Similar Questions

  • Windows and the Base filtering lack Windows, the Firewall Security Center services

    Original title: I have a problem with my computer.

    In my computer, the windows Security Center service, windows firewall and filtering basic service is missing. I know they are very important from another post on this forum.

    So, I'm worrying about my willingness to computer infected with malware caused by this problem. What should I do?

    Please help me to solve this.

    I use windows vista Home premium SP1 32-bit, and I use Avira free antivirus.

    Any help will be appreciated.

    Kind regards

    Adilan

    I try to do a repair of the system with one or the other repair disk or installation disk.  If you don't have either, you can do a repair disc by clicking on start-> Control Panel-> backup and restore by clicking on create a system repair disc.  If this does not work, you may need to restore your computer to factory settings.  I would back up all the important files now while you still can because you don't really know how damaged your computer is.

    Good luck.

  • Cannot start Windows error 0xc01a001d

    original title: crashed!

    Today installed some windows updates now, I can't use the computer. It comes up with!  0xc01a001d!  28589-91333 (Registry\Machine\Components\DerivedData...)  I can it work again?

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

    Contact the computer manufacturer and ask them to send vista recovery discs

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    and you could also repost the link below in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

  • Cannot start Windows: error 0xc000000f

    That's what my laptop Toshiba says when I try to start it.  Also:

    File: \Boot\BCD

    Status: 0xc000000f

    Info: An error occurred trying to read the boot configuration data.

    I can't find my installation disk, which is the first thing that he told me to try.  Some other internet forums told me to try to start in "safe mode" or find "of start-up advanced options", which involved pressing F8, but when I tried I just got the same screen of Boot Manager.  Do I have other options?

    original title: failed to start - a recent Windows hardware or software change might be the cause.

    http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/ea0a940d-c28c-4983-8631-fb27d9740de2

    Read the info above and read the link in the post by:

    Ronnie Vernon
    Microsoft MVP
    Windows desktop experience

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    To do a startup repair disk to work with:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot start Windows Task Manager printer spooler, Service.

    When I try to start the spooler printer of Windows Task manager, it gives me an error message - operation failed.  I need to get this started to launch my new brother FAX/printer.  Help, please.  Thank you.  JoB

    Hello JoB777,

    Thank you for your message.  Give a try:

    Click 'Start' > right click on 'Computer' > select 'manage '.
    Expand "Services and Applications" > select 'Services '.
    Double-click on "RPC Remote Procedure Call () ' > ensure that the startup type is set to automatic and that the service is started, if not select 'start'"
    Double click on 'Print spooler' >     ensure that the startup type is set to automatic and that the service is started, if not select 'start '.

    Test for features, once you have verified that the print spooler is running, restart your computer to ensure that the service is started automatically.  Please let us know if it did or did not help to solve your problem.  I'm moving this thread to the Hardware forum.

    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: 0 x 80070424 "cannot start the Windows Security Center service" when you try to start the Windows Security Center Service.

    original title: Error Code 0 x 80070424 on the Windows Firewall settings

    I can't turn on my Security Center Windows Service, when I try to turn it on it displays "cannot start service Security Center Windows"

    Then when I go to my firewall settings, it says "Windows Firewall don't use recommended settings to help protect your computer" I click "Use recommended settings" but it displays "Windows Firewall cannot change some of your settings 0 x 80070424 error code" how to fix this?

    Hello

    Make sure that the PC is clean (free from zero rootkit to access before you try this corrected)

    This problem of firewall is commonly found on vista and windows 7 (64 BIT OS)

    Download the two files from the registry

    http://download.bleepingcomputer.com/win-services/7/Mpssvc.reg

    The base filtering engine

    http://download.bleepingcomputer.com/win-services/7/BFE.reg

    Run them and click YES when you receive a UAC prompt

    Restart your PC

    Press Windows key + R and type

    regedit , and then click ok

    Reach

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

    Right click on it -permissions

    Click ADD and type

    Everyone, and then click ok

    Now click on all

    Below, you have the permission for users

    Select full control, and then click ok

    Press Windows key + R and type

    services.msc , and then click ok

    Start the service database and then filtering engine service windows firewall

    If you still get this error

    Windows could not start the Windows Firewall on the local computer. See the event log, if services not windows contact from the seller. Error code 5.

    Download and launch this key

    Shared access

    Click YES when you receive a UAC prompt

    Reach

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAccess

    Right-click on -permissions

    Click Add and type

    Select full control and everyone

    You should be able to start right now the firewall

    You can also Miss defender of windows security center, BITS and windows update services

    Download

    Security Center service

    http://download.bleepingcomputer.com/win-services/7/wscsvc.reg

    Windows Defender

    http://download.bleepingcomputer.com/win-services/7/WinDefend.reg

    BITS

    http://download.bleepingcomputer.com/win-services/7/bits.reg

    Windows Update

    http://download.bleepingcomputer.com/win-services/7/wuauserv.reg

    Run them and click YES when you receive a quick restart, UAC the PC


    Good luck

    * Edit *.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  • Windows vista 32-bit error code 0 x 80070424 - the Security Center service cannot start

    Hello.

    I have Vista Home premium SP2, 32-bit operating system. A week ago, I received a .rar file, Avira has said has been infected. I did not open the file, I deleted, ran a complete analysis of the system and assured there was no residue. However, after that, I realized that the defender was not on and then realized that my firewall did not work either.

    Specificities of each:
    (a) it seems that my firewall has disappeared, and specifc messages I get when trying to turn on my firewall is: "could not start the Security Center service. When I run services.msc, I am not at all a security service, all I have is a security accounts manager.
    (b) when I try to activate Defender, I get the error code 0 x 80070424. «Windows Defender encountered an error: 0 x 80070424.» The specified service does not exist as an installed service. »

    I tried 5 different Microsoft its difficulty, but none have worked so far. I also tried to reinstall Windows Defender, but Microsoft said that I installed it. All updates are underway. I followed the steps in this link: http://support.microsoft.com/kb/968002 and no. chance either. I used additional resources and tried following these steps also, but all services have already started on my system.

    Can you help me please?
    Much appreciated,
    ~ naila

    Hello nailal,

    Please follow the advice given in the article below:

    Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall

    Please reply back and let us know if this can help.

    Thank you

    Marilyn

     

  • Security Center Windows won't power up - error: could not start the Security Center Service

    Windows Security Center does not, when I try to turn it on there an error message says "Cannot start the Security Center Service". There is an icon on the bottom of my screen of windows security alert, I don't know if my computer has a virus, but I scan my Norton Antivirus full of the online system, but it has not detected any viruses. I hope someone can help me with my computer. It will be much appreciated.

    No, only the security accounts manager isn't Security Center.

    The next method is to restore the missing Security Center service.

    http://www.Winhelponline.com/temp/W7-wscsvc.zip

    Unzip the REG file and then run it.

    Then restart.

    See if this will help restore Security Center application Services.

  • Windows Security Center service cannot be started

    I have some malware on my computer. It is gone now. I ran several scans with different products. No virus or malware are detected.

    However, I get the error message "Cannot start Windows Security Center Services".

    I tried all of the recommended patches. But none of them work.

    When I try to start the Services of Windows Security Center, I get the error message

    "Windows failed to start the service on local computer Security Center.

    "Error 1068: the dependency service or group could start.

    Also, when I start the computer, I get the message error "problem, from module 72e8044d.cpp is not found" I don't know if the error messages are related to the same problem.

    I am running Windows 7.

    Any suggestion would be appreciated.

    Hello

    Thanks for the reply.

    Your computer was pre-installed with Windows 7?

    If so, you may need to contact the manufacturer of your system to help in the exercise of upgrade on site.

    If you have installed Windows 7 separately on the machine, you can perform the upgrade on the spot, using the Windows configuration files stored in DVD or USB.

    Hope this helps, get back to us if you need further assistance for Windows.

  • When you try to activate Windows Security Center, receive error message "cannot start Windows Security Center.

    try to open soundcards Security Center declined as I click to put on there is one message the servicem of windows Security Center cannot start...

    * original title - disable windows security center service .How can I makr turn on please *.

    Hi tsedeyasefa,

    Please see the thread with a similar problem and fix possible:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Security-Center-service-cant-be-started/49277301-85c2-4B13-9f71-1bd08e4688a0

    I hope this helps!

  • Windows 7 Security Center service is missing from the (local) services and cannot be started

    Hi Experts,

    I use the version of windows 7 Home premium. My computer suddenly got hit by the virus and I found the message in the center of action as "Activate windows Security Center service", but when I do, the message I m getting "failed to start the windows Security Center service"

    Options, I tried to replace as follows.

    one) went to the services (local) and checked the Security Center to check the startup mode but the Security Center is missing here
    (b) tried to run the malwarebytes software, he finds some virus and I deleted

    Yet, I could not able to get rid. Help, please

    Hello

    Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
    ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
    who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
    strange questions.)

    Start - type in the search-> find abuse at top box - click on - RUN AS ADMIN

    Service set to AUTOMATIC (delayed start) Security Center and BEGAN to
    Chech also the serices dependent as below.

    References to Vista also apply to Windows 7.

    Check the default services and dependencies to ensure that they are running.
    http://wiki.blackviper.com/wiki/Security_Center

    Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

    How to fix Vista Reporting incorrect information Security Center
    http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

    How to disable or enable the Security Center in Vista
    http://www.Vistax64.com/tutorials/67737-Security-Center.html

    This thread might help as it might be a permissions problem.
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

    ====================================

    To look for the Windows 7 KB and responses for Solutions (most are above).

    Searck of Ko &-> 1058 Security Center
    http://support.Microsoft.com/search/default.aspx?mode=a&query=1058+Security+Center&SPID=14019&catalog=LCID%3D1033&AST=28&RES=10

    I hope this helps.

  • Windows Firewall and Security Center will not start, error 1068 and 1079

    I can't start my firewall Windows, error: 1079... or Security Center, error: 1068. Can help you with this question? When I try to access the Dependencies tab I get this error: Win 32: the specefied for this service is different from the specefied to account for other services running in the same process.

    I checked to see if dependencies were the same account before I got the message of 'Win 32' and WMI Service runs in the same account (Local Service) as firewall and Security Center, but the RPC Service is running on the Network Service account and cannot be changed via the services console, because the account fields are gray and cannot be viewed or modified. I try to avoid using the tool 'SubInACL' because I don't want to reset the whole registry.

    Help, please!

    The other post:

    I had a problem with obtaining the Windows Firewall and Security Center to start. Service account permissions have been changed at some point, including the depedencies. I get the error 1079 on the Windows Firewall and 1068 on the Security Center. Both are defined on the Local Service, but dependence, the CPP is set to Network Service and cannot be changed because the user fields are gray. I try to avoid using the SubInACL.exe because I don't want to reset the whole registry. Can you help me please?

    No, I'm not on a domain. I connect via a open wireless "hotspot". My main problem is; I don't have a Firewall or Security Center. Nor will begin. I get the error: 1068, to Security Center and an error: 1079 on Windows Firewall. When I try to access the dependencies on either I get this window:

    WIN 32: The account specified for this service is different from the account specified for other services running in the same process.

    A month ago I made the mistake of trying to brand of ACDSee of security, "ACDOne" which includes software "BitDefender". That's when I lost my firewall and Security Center. BIG MISTAKE! I uninstalled and deleted all the files that I found that have been left.

    My Security Essentials and Windows Defender work very well. I'm stuck and need help with this please! Please, I beg you! Someone... Help!

    The system cannot find the specified file.

    http://support.Microsoft.com/kb/947821>

    After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the updates.

    UTC/GMT is 02:51 Wednesday, April 25, 2012

  • When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

    When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

    Hello

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed?

    Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

  • My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

    My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?
    My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

    Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
    topic status, it must be said... Has begun
    under Startup Type, it must be said... Automatic
    If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
    the startup type, click on the pointer, and then select Automatic (delayed start)
    the service status, click start
    Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

    Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

    Hello

    ·         Are you can change the Security Center service parameter by using a different user account on the computer?

    I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

    How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

    http://support.Microsoft.com/kb/2255099

     

    Note:

    You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

    If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

    Hope the information is useful.

Maybe you are looking for