Cannot use USB Linux Live on Predator 17 G9-791

Similar Questions

• Toshiba Satellite Pro M30 cannot use USB 2.0

  I can't use USB 2.0 on my laptop (OS = Windows 2000).
  Where can I download this driver-USD for this Board (Toshiba laptop motherboard).

  Greetings

  Hello

  Have you seen yellow errors such as exclamation points in Device Manager?
  If not, in this case it of not necessary to install all the drivers.
  Moreover, the operating system automatically recognizes the USB ports.

  But what USB device doesn't work? As far as I know if this external device needs more energy than the 500mA so it is possible that the operating system can not recognize this device.
  In this case you need an external power supply for this part or you try to use the USB hub.

  Good bye

• so many questions: no sound, cannot use USB and dongle...

  I have a toshiba satellite l505d-gs6000... I have installed the latest updates for my computer stop for the night he opened in the morning and I have no sound, unable to use USB and dongle... I restored an hour earlier and who fixed it, I have re installed windows os and it does not solve it... the drivers on my sound it's updated but also when I click on its screen it says: no audio output device is installed:

  Hello Jason, I've done a little reading on your laptop model, it seems, there is a hardware problem with this range of laptop, which causes the USB and sound to fail. There is no known for this hotfix.

  Check out this thread of Toshiba... http://forums.Toshiba.com/T5/audio-sound/no-sound-USB-on-satellite-L505D-gs6000/TD-p/172564/page/8 
  You will need to contact Toshiba customer service if your laptop is under warranty.
  Find a Toshiba Service Center

• Cannot use USB keys

  I tried to get 2 different keys to work on my boyfriend's computer.  It is running XP and it's an older version.  The port that I put them in work so that isn't the problem.  I go into the Device Manager and there is no yellow question mark and when I click on them they said that it has not installed the drivers for the USB key.  He searches the computer for a driver and of course it is not a.

  These are only $13. disks and so they do not come with any software.  How can I get the right driver.  It does not say the name of the USB but I can not find a site with this title.

  very frustrated help,

  Hi Ruth,

  This problem can occur because of a defective or incorrectly configured hardware driver device defective, missing or misconfigured, Mismatched cabling out-of-date firmware or basic input/output system (BIOS).

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/?kbid=310575&WA=wsignin1.0

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• Cannot use sql developer Linux approx.

  Cannot use sql developer Linux CA. "enter" is not working well.
  Please give me some advices.thanks

  Looks like the old known problem with accelerators, try:

  Preferences - accelerators - load - default setting

  Hope that helps,
  K.

• Cannot use other funds of screen - don't change other Linux wallpapers

  I've always been able to change screen, often using 4uwallpapers - now, he'll let me just use screen Linux and then only those (which I don't like) located in the appearance section of the system.

  Sorry, this isn't a problem of Firefox support, the operating system manages the wallpaper.

  http://UbuntuForums.org/

• Re: Satellite L10: cannot use the USB after XP Home recovery

  After Systemrecovery with the toshiba CD-ROM and install all updates for xp, there is no chance to use usb on somthething else keys. XP said ' you must intsaller a pilot ", but I do not know whichdriver. I don't think that in 98 I intsaller a driver?

  (Sorry for my bad English, I learned 25 years ago in school)

  Post edited by: patty64de

  Hello

  USB 2.0 drivers are part of the service pack Ms.
  You must absolutely install MS all service packs. I recommend that you install SP2 and then all the updates Ms.

  Check the MS document:
  http://support.Microsoft.com/kb/329632

  In addition, you must install all drivers Toshiba from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  There is a Chip Set Utility, which is very important.

  Best regards

• Cannot use parental control due to not agreeing terms of use of windows live.

  I'm unable to use the parental control due to not agreeing terms of use of windows live. I click on the link provided, but it is not possible to accept the agreement. Someone knows what to do?

  I found the link you are sent to in order to accept that these TERMS will not. The correct link is: http://g.live.com/0fsenus4/nexusmigrate , it works perfectly and you don't have to spend hours trying to find the hidden message. Gerry Lee

• Linux live CD on Satellite M70 and Driver Modem

  Hi I want to use Linux Live CD (or USB boot Linux) on 70 M satellite. I tried puppy linux, but it did not recognize my modem and the USB key (I use the dial upwards). I want to know if someone has used linux live CD on this PC and he was able to use the dial-up modem. To this end, if I need a driver (linmodem), which one and where I should get. And what live CD distro I should choose.

  Preference, I like any distribution that can be started from a USB because I n, t want to use my HD at all and boot USB will give me the opportunity to saev my job back in the USB. I only use the Internet (dial-up modem) and word documents (OpenOffice or other), or maybe (not required) I like to watch movies (CD or DVD).

  Thank you.

  Hello

  Try again with the Knoppix Live CD. I didn't try yet but I will do in the future. Get info on http://www.knoppix.org/

  By the way: If you want to use other BONES because of security or do some experiments, you can also try installing the virtual machine. A few days ago, I installed VMware Workstation. There, you can preinstall a few different operating systems and do what you want (Internet and so on).

• Cannot use the recovery function after an Installalation of Windows 7

  Hello

  I installed Windows 7 on my laptop.

  HP Pavilion dv5 1110eg

  After that, I tried to remove it with the recovery tool (don't ask my why).

  But when I want to start the Recovery Manager (esc-> F11) his boot to Windows instead of the backup Partition.

  I read Acsess thrue Linux-Live DVD but I can't launch the backup Partition!

  I formatted my main partition in the hope that loads of Bios, the recovery Partition, but it didn't.

  So my mommentary Situation is:

  -No operating system

  -No Acsess to the recovery feature

  Could someone help me?

  Edit:

  I forgot to say, that I did not have a recovery CD, because I baught the laptop on E - Bay and the last owner burned one of the 2 discs already. And I had no Chance to burn the first CD...

  HRM

  Message edited by HRM on 26/09/2009 11:01

  If you still work partition recovery, try to do as the active partition, I hope it works always.

  You can search for linux or tools BACK activate or install the Win7 folder in C and then use computer management do D (recovery partition) active rebort, without pressing F11, it doesn't automatically run a system recovery.

  Choose the setting that is installed at the factory and wait until she finished. As soon as it's over, make your own recovery discs.

• Tecra S2: Problems with Linux Live CD after upgrading the BIOS

  Hi all

  A few moments ago I flashed the BIOS on my Tecra S2. Now, my current BIOS version is 2.80. Unfortunately no, I had problems with booting of Linux Live CD like Knoppix or Kanotix. The freezing of the startup process, when the PCMCIA module is tried bo be started.
  What I want to do now is to downgrade my version of BIOS. Is anyone know how it works, and someone has an older version of BIOS of 2005? I couldn't find any older versions on the Toshiba support sites.

  Thanks for all replies!

  Biberkopf

  You re right. On the Toshiba page you will find only the latest version of the BIOS and the older versions are not available on the page.
  In my opinion if you want to downgrade the BIOS question using the service provider authorized in your country.

  But have you checked this site useful:
  http://newsletter.toshiba-tro.de/main/

  There you can get help with installing box machine
  It provides some useful advice to the configuration of the device

• It is possible to contact PCA9548A (8-CHANNEL I2C SWITCH) using USB-8451?

  Hello

  Now, I'm doing a project related to the smart battery. Now, I read data from a stack using the USB-8451 by smbus. The next step uses the USB-8451 casing to read the data of several batteries through smbus. I chose the PCA9548A (8-CHANNEL I2C SWITCH) to achieve this goal. But when I check the specification of the PCA9548A, there is a fix I2c format to read data from it, I tried several times, but still no can tell me where is the error in my code, or maybe it's impossible to communicate with this chip using USB-8451?

  Here is the fix that i2c read format of PCA9548A

  Why are you usng the script live? Have you looked at the examples of delivery for the 8451? You just need a couple of nodes property to set the rate and the address, and then use the VI to write I2C.

• I installed iLivid and now FoxTab media but cannot listen to the live football for a reason any.

  Need help with streaming pls

  I installed iLivid and now FoxTab media but cannot listen to the live football for a reason, get really really bored, I wud appreciate all help pls, thanx

  I installed iLivid and now FoxTab media but cannot listen to the live football for a reason, get really really bored, I wud appreciate all help pls, thanx

  Hello

  You must contact that third party software developers and check for known issues or updates for compatibility to the version of Windows you are using.

  Concerning

• Can I use transfer EZ of WindowsXP SP2 for Windows7 using EZ transfer cable or should I upgrade to SP3. Same Q to use USB Fash drive.

  Transfer files, etc. from XP to windows7 using EZ transfer cable or need to use a USB Flash drive?

  Hi easyeddy,

  1. are you referring to Windows Easy Transfer?

  If you're referring to Windows Easy Transfer, Windows Easy Transfer for Windows XP supports the following operating systems:
  1 Windows XP SP2 to Windows Vista.
  2. Windows Vista to Windows Vista.

  In your case, you cannot use Windows easy transfer to transfer files from XP to Windows 7 because it does not support. You should consider using a USB FlashDrive to transfer/move your files from Windows XP to Windows 7.

  For more information, see the following articles.
  1 see Windows Easy Transfer for Windows XP
  2. see the section migration of files from Windows XP to Windows 7 in this article

  You can consider installing Service Pack 3 (SP3) on your computer. See download Windows XP Service Pack 3 (SP3)

  See also, steps to take before you install Windows XP Service Pack 3

  Visit our Microsoft answers feedback Forum and let us know what you think.