Canon XA20: is it better to use mp4 or avchd settings?

Similar Questions

• Buzz of pitch high woman victim Canon XA20

  I recently bought two Sony UWP - D11 to work with my Canon XA20 wireless microphones. I have the film interviews in three floors building. I use headphones (headphones at 12 on camcorder setting) during recording and can not hear a buzzing or extra noise while filming. However, it's another story when I add the files on my or other computers. The pickups will sometimes work well on the floor and then experience a humming noise and audio pitch high down or vice versa. Sometimes I just encounter the problem in all locations. There are a lot of inconsistencies. I spoke with a representative of sony to ensure that my microphone settings were not the issue.

  This could be a problem with the way in which the files are written to a memory card, what I use, the card memory internet wireless in the building, or another problem? If so, what would be the best solution?

  I really appreciate your help.

  Hi Clare27!

  Thanks for posting.

  It is possible that something causes interference or signal of buzz is coming from the micro receiver.  If you connect a standard stereo microphone of no wireless in the camera, you hear the same buzz?

  If it is a time sensitive matter, additional support options are available to contact us.

• Cannot capture with Premiere CS6 with canon XA20

  Recently purchased canon XA20 and attempted to capture form this unit, but the peripheral States is in offline mode.  I recorded media AVCHD, 18MPS LPCM (59,94 P) recording mode.  In the canon of a type first developed device.  of course the XA20 does not appear for the type of device do not know what to put.  I used only the standard and it does not recognize the camera.     I would appreciate help Anny in setting.

  HI Dakota,

  You cannot capture AVCHD files. You copy the map on the media player and then ingest them via the media browser in Premiere Pro. Hope that helps.

  Thank you
  Kevin

• I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  I use Windows 10 and use the Canon SX20 IS. How to use the function of Photo stich?

  Is it possible to get the procedure to use feature stich photo?

  Will be Zoombrowser EX for windows 10 wotk?

  If any expert can guide me... that will be great.

  Hi Sat17,

  Thank you for your inquiry.

  For Windows 8 and beyond, ZoomBrowser EX has been replaced by EX. ImageBrowser

  Your software you will need to updated for Windows 10.

  You can access the software for your camera by clicking here.  Once on our site, scroll down to "Drivers and downloads", then use the drop down menu to choose "8.1 Windows" or "Windows 8.1 (x 64)".»  Your camera software has not been updated for Windows 10, but for Windows 8.1 software will run on your computer.

  To update your software, click the [Select] button to the right, then click on "How to download and install" for installation instructions.

• What is better to use the database or persistence.

  Hello friends,

  I have a doubt in relation to the use of the database and persistence.

  I'm working on an application based on OS_v5.0, I use a database to store my data or persistence.

  While it will be better to use as prospect of memory and speed.

  Thank you

  There is no right answer here.  Include critical factors

  (a) the data structure - is that he opposes or ranks

  (b) the size of the data,

  (c) how the data should be used

  (d) what coding effort, you are willing to put in.

  You must weigh all these factors before making a decision.

  Maybe you can give some pointers in each of these areas and we can suggest how we were?

• In general, is it better to use java.sql.Date and java.sql.Timestamp instead of oracle.jbo.domain.Date?

  Hello world

  During playback of Oracle ADF Real World Developer's Guide, I noticed the dates match occurring in JDeveloper is different from what is the list in the book. JDeveloper is failing to oracle.jbo.domain.Date, but according to the book:

  DATE	java.sql.Date	DATE type is mapped to java.sql.Date if the column in the table is a no time didn't need information zone.
  DATE	java.sql.Timestamp	DATE type is mapped to java.sql.Timestamp if the column in the table has a component "time" and that the client needs to zone information.
  TIMESTAMP	java.sql.Timestamp	The TIMESTAMP type is mapped to java.sql.Timestamp if nanosecond precision is used in the database.

  In general, is it better to use java.sql.Date and java.sql.Timestamp instead of oracle.jbo.domain.Date? Using java.sql.Date and java.sql.Timestamp could save me some headaches conversion date. And, is there a place in JDeveloper to display these maps? I looked around and didn't see anything.

  Thank you.

  James

  User, what version of jdev we are talking about?

  In GR 11, 1 material versions db types date and timestamp are mapped to types of domain data that represents a wrapper for the native data types. The reason was that the framework can work with the domain types regardless of the underlying data type.

  Since Oracle 11 GR 2 maps the types DB to java types (default selection, you can change it when you create a model project, you can set the Data Type Mapping). Once the pilot has business components define you cannot change this setting it would break existing components such as eo or vo.

  So if you are working wit 11 GR 1 subject, you must use the domain types, if you work with GR 11, 2 or 12 c, you can use the domain types, but it is recommended to use the java type mapping.

  Timo

• Wrong settings when create a sequence from an AVCHD (.mts) of canon xa20 file. First Adobe defines as AVC - intra 100 1080i

  I don't know why Adobe first CC automatically adjust a .mts of my canon XA20 file (from the h264 AVCHD 1920 x 1080 25 p) as a 1080i AVC-intra 100. When editing, it appears crisp and loud. IM edition in a windows 7 64-bit platform. I have to install a properly codec on my machine?

  Any suggestion?

  My image is 1080i is why settings intertwined.

  If yours is just progressive change to no field.

• Photoshop does not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version.

  Hello

  I got a new camera and Photoshop and Lightroom will not open Raw images with my new camera Canon 6 d help! I use Photoshop CS5 extended version. and Lightroom 3

  Good and bad news:

  The bad news is you need CS6 or later version to open 6 d RAWs. (The 6 d did not support until Camera Raw 7.37.0 was created in CS6;) You can choose to upgrade (I recommend CS6 to jump and go straight to 2014 CC for $10 / month) * GOLD *...

  .. the good new is that the DNG Converter can help you convert your RAWs in DNG for CS5 and Lightroom 3.

• Better to use an arbitrary primary key?

  Hi all
  
  I have an employee table where each employee has a unique employee ID. I expect to look up employees by their ID frequently. Is it better to use an arbitrary sequence as the primary key and put an index on the field ID employee or to the employee ID primary key? Thanks for your help.

  Welcome to the forum!
  >
  Is it better to use an arbitrary sequence as the primary key and put an index on the field ID employee or to the employee ID primary key?
  >
  Best practice is to use surrogate keys (for example, your arbitrary sequence) rather than actual data (employee ID) for the key field values.

  The main reason is that the values of data, data, maybe should be changed in the future. If you use a piece of data as the primary key and then must change any changes becomes problematic if there are references to foreign keys to it.

  Another reason is that these references to foreign keys mean that the value of data is now duplicated and exist in several tables. It should be changed in any of these tables.

  And business rules to deal with employee ID (or any other value of data) may change. It may be encrypted or protected against access by unauthorized persons. If ID is a primary key, because it is much more difficult to encrypt or protect the value is necessary to join the tables correctly and will therefore always available for the purpose of the request, even by people who are not allowed to access the value actually.

  Never use values of actual data for values of key with the exception of the simple sample applications.

• Camera Raw for Canon EOS 6 d? I use PSE 9.

  Where can I download a Camera Raw version that supports Canon EOS 6 d? I use PSE9.

  Peter.

  For the EOS 6 d, you have two options:

  (1) upgrade to PES 11. (2) DOWNLOAD and install the free Adobe DNG converter to convert your raw files to the universal Raw format files and Adobe will open in all versions of PSE (keep your originals as backups and for uses in the software of the camera factory) DPP

  Windows download Click DNG Converter 7.3

  Mac download click DNG Converter 7.3

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• Is it better to use a single project or to jump back?

  Greetings,

  I am using Captivate 4. And I wonder if it is better to use a single project or to jump back?

  I have a master project and instead of a big project, I was wondering on jumping small projects and returning to the main.

  I tried to understand the idea of jump to slide 10 and jump to another project and then again to slide 20.

  Should projects be published in order to see this work?

  I'm learning just on Captivate so I'm not sure best practices.

  Thank you.

  It is not easy in the Captivate projects to switch to another project at Midway specific slide.  Captivate is configured by default to launch just each project of the first slide.

  There are workaround solutions published on this forum who has to jump in the middle of another project, but they may require some complex coding in JavaScript or ActionScript.

• When shooting images for 'HDR Pro' sources, is it better to use TIFF 16 bits rather than 8-bit JPEG?

  When shooting images for 'HDR Pro' sources, is it better to use TIFF 16 bits rather than 8-bit JPEG?

  When shooting for HDR, it is preferable to the Raw format.

  When you import the image to gather in HDR and you use JPEGs, Photoshop will show you the message that it is better to use the Raw instead of JPEG...

• I'M ON A WIRELESS SYSTEM TO RUN FAST, NOW I'M I'VE SEEN TROUBLE STREAMING MOVIES AND EVEN VIDEOS ON YOU TUBE, CAN SOMEONE ME USING THE ADVICE ON SETTINGS OF WINDOWS VISTA?

  I'M ON A WIRELESS SYSTEM TO RUN FAST, NOW I'M I'VE SEEN TROUBLE STREAMING MOVIES AND EVEN VIDEOS ON YOU TUBE, CAN SOMEONE ME USING THE ADVICE ON SETTINGS OF WINDOWS VISTA?

  Hi GrahamCroal

   

  1. is the streaming of films and videos slow down or you are totally unable to broadcast their?
  2. what exactly happens when you try streaming?

   

  You can check if the below link help-

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

   

  Also the connection speed must be higher than the data rate of the content you read to discover Fast Streaming. The faster your connection, the better your experience will be. So it depends entirely on the broadband connection you are using and speed offered by the connection. If you want faster streaming then you need check the high-speed broadband connections. You can communicate with the internet service provider for more information about the same thing.

  I hope this helps.

• Why can I not use the "display style settings?

  I bought and downloaded 12 elements. But I can't do many things. I can't use the 'display style settings"I can't download new effects. I'm not impressed. What should I do?

  Find the forum for any program elements it is and ask questions on how to use it.

  Photoshop Elements

  First Elements

• is it better to use functions instead of objects? things get very complicated

  My App is trying to apply the method of Muller. I have about six classes. It appears to be too complicated to cope. Should I go back to the use of functions? (maybe two classes). I have to start over.

  Hello

  1. what operating system is installed on the computer?
  2 are. what App you referring?

  Answer for you help the better.

  You can also view the article mentioned below:

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  If you are developing a program, it would be better in the MSDN forums.

  Here is the link: http://social.msdn.microsoft.com/Forums/en/