Capacity mode

Similar Questions

• My computer has lost the ability to go in mode "Eve".

  From a windows update last Saturday, my computer has no opportunity to use mode 'sleep'.  It's just one of the many changes that have occurred since the update: display is distorted, screen saver does not work as it did previously, sleeping capacity mode disappeared, etc..  I am very frustrated.  I have nothing but turn off my computer to allow updates to day, then when I turned it back on, everything was different.  I tried to set each of these things, but have had no luck.  Any suggestions?

  As updates to create a restore point when they install suggest that you use the system restore to roll the system using that point restaurant named Windows Update from Saturday - System Restore: frequently asked questions MowGreen Expert from Windows IT Pro - consumer safety

• VCA compatibility between processors 2600v2 E5 & E7-4800

  We want to add processors Intel E5-2600v2, Ivy Bridge, to a cluster of u1 vSphere 5.5 using E7-4800, Westmere processors.

  When checking the following link,.
  http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=CPU & ProductID = 64 & VCL = true

  Enhanced VMotion does not seem to be supported for the Ivy Bridge in Westmere processors.

  VMotion strengthened capacity Modes: Intel Merom generation

  Generation Intel® Penryn

  Intel® Nehalem-generation

  Intel Westmere generation

  We read this information correctly?  Westmere and Ivy Bridge CPU VCA not compatible within the same cluster 5.5u1? If there are documents to support that they are supported, can you give the link? Thank you.

  According to the specifications of VMware Compatibility Guide: cpu (you can select both processors and compare them), Intel Westmere is registered to two processors as a mode of EVC supported.

  André

• capacity in evaluation mode

  While the 60-day trial, running will be able to use some of the optional vCenter such as VMotion, DRS, and HA server components?

  Thank you

  -dog

  In Eval mode, ESX is equal to the 'Business Plus' version, you can use all the features.

  André

• Deleted partition BOOTCAMP capacity entered Recovery HD

  I am facing a weird problem and it is honestly driving me crazy!

  I had a partition bootcamp (80 GB) with Windows 7 installed for a while. Then I tried to delete this partition using Bootcamp Assistant of Apple, but I have encountered an error and was not able to do. So I decided to start in Recovery Mode, formatted the BOOTCAMP partition in the hope that I would be more able to merge with my Macintosh HD one.

  I managed to do it, which means that I then had Macintosh HD on one side and a BOOTCAMP partition go 80 empty on the other.

  However, something was not trying to group them together and for some reason, I now have a capacity of 420 GB displayed on Macintosh HD (same as before), no BOOTCAMP partition remain always displayed and order diskutil list showing me 80 GB for Apple Recovery HD (which correspond to my initial BOOTCAMP capability):

  ~ diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 419,4 GB disk0s2

  3: Apple_Boot Recovery HD 80.5 GB disk0s3

  When I run the option first aid in Apple SSD disk utility, I get the following:

  

  My only wish is to be able to recover my full 500 GB on Macintosh HD for later use bootcamp again and install Windows 10.

  Looking forward to any kind of help,

  Thank you in advance.

  Save all your data, preferably twice and independent from each other. Format the drive and reinstall the OS from scratch and restore your data. Alternatively, if you are comfortable using the command line this syntax comes into play:

  diskutil resizeVolume peripheral [ limits |] MapSize | R | size [numberOfPartitions]

  [part1Format part1Name part1Size part2Format part2Name

  part2Size part3Format part3Name part3Size...] ]

  No destructive resize a volume (partition); You can

  increase or decrease its size. On the other hand, takes no action

  and print some info.

  A size of the limits takes no action, but instead will print the

  target range of valid values for the score, taking into

  conditions account file system and partition from the current map

  as files used and other partitions (buildings) following the

  target.

  A size of mapsize takes no action, but instead will print the

  size of the device disc set covering, as well as the

  map of entire partition size (all partitions less map

  (overhead). The whole-disk device may be larger than the by -.

  competition card if the entire disk device has increased since the party-

  tion map was created. More a whole-disk device is possible

  with some drives (RAID) business systems.

  You can grow a volume (partition) (back) to its maximum size

  possible, provided no new partitions have been created, which

  are in the way, by specifying R for the new size of the volume. You

  must use R instead of trying a value such as

  100% because the latter cannot count fresh generals score card.

  To decrease the size, new partitions may be

  created to fill the recently released space.  To do this, specify

  the numberOfPartitions, format, name, and size settings in

  the same way as the description of triplet for the

  partitionDisk verb.

  Resize a volume that is currently defined as the computer

  Startup disk will invalidate this setting; use the Startup

  Disc Bless or system preferences panel (8) to reset the

  resized volume as the boot disk.

  Device refers to a volume; file system of the volume must be

  logging HFS +.  Valid sizes are a number followed by a capital

  Letter from Tal multiplier or percent sign suffix as described in

  the section SIZES at the end of this page (e.g. 1-5 t, 128 M,

  50%).  Property of the disc is needed.

• Installation in expert mode

  Hi forum users

  If anyone of you needs an accurate description of installation of operating system using Expert mode, maybe this can help you.

  When the recovery process has begun there are menu where you can choose between two modes of installation.
  1 standard mode
  2. expert mode

  At first he put there important warning: all data stored on your computer will be lost. It is also important that hollow a Standard installation partition will be created and all data on the hard drive will be lost.

  If you want to install the operating system on a partition, please use Expert mode. In this case, the software can be installed on an existing partition. Alternatively, you can make one by yourself.

  If you want to make a partition with a set capacity, please do it on this path:

  1. choose number 2 Expert mode pressing
  2 approve OK key ENTER
  3. choose LOCAL > DISK > image
  4. look in: must be selected for the CD-ROM drive
  In the Middle window choose GHO file and press ENTER
  5. using the TAB key you must mark the player information and so on and press ENTER
  6. using TAB button again part brand of window average (blue line) and with the SPACEBAR activate new dimension box
  7. place inside the new size of the partition and press ENTER again
  8. the question to continue with load disc? confirm with OK

  I hope this can help you to make the desired partition size.

  Good bye

  Thank you! :)

• My macbook pro is very slow, and often stuck mode programs "not responding".

  MacBook Pro (13-inch, mid-2012)

  Intel Core i5 2.5 GHz processor

  4 GB DDR3 memory at 100 MHz

  500 GB of storage capacity SATA disk

  Operating system OS X El Capitan 10.11.3

  It is very slow to start, in addition to open programs, for example, Mail, Safari, Word, Adobe Reader. Sometimes it can't even open programs and gets stuck in mode "not responding". I feel like a memory problem.

  Download and view a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.

• Tecra R840 - Win8 - energy hibernation mode

  Hello

  I did the upgrade offered to W8, I am very satisfied with the W8 system, but the problem is that the laptop consumes battery also in hibernation mode.

  I wouldn't understand that energy consumption will be in mode 'sleep', but on the hibernation mode?

  I discovered that when the computer is in sleep or Hibernate, and I opened the lid, the computer automatically starts EVEN if the 'power computer when open cover' option is unchecked.

  When I select to shut down the computer - it does not react to open the lid, I have to press the power button.

  The problem may come from the windows system, that BONE tolds the computer wake up once the lid closed.

  The problem is, the computer starts to load whenever I wake up after hibernation (I had my 15 minutes of the Home Office, and it consumes about 1 to 2% of battery.

  It is quite annoying that my battery capacity full load is about 83% of the original (I bought my PC in June2012).

  I got Lenovo T60 7 years ago, and there was an option to start to charge the battery only when the battery charge was less than 95% and it saves the battery capacity.

  Does anyone has some clues?

  Thank you!

  Fact is that the battery capacity will decrease even if the laptop is turned OFF completely. Capacity of the battery will lose some percent of capacity. To reduce this review - http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm
  A useful document for you can also be http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm

  > I Lenovo T60 7 years ago, and there was an option to start to charge the battery only when the battery charge was less than 95% and it saves the battery capacity.
  As far as I know that this option is not available on Toshiba laptops. When it is connected to AC notebook power supply starts to load the battery automatically.
  There is no possibility to change anything.

• When the capacity of the battery falls Satellite Pro U300 occasionally lose power

  Hello

  I suspect you have a defective battery (standard installed on the laptop) on my new Satellite Pro U300 - 11 k and I wonder if someone had a similar problem.
  When the power drops to 10%, my laptop occasionally loses power. In the range of less than 7% capacity always loses power, i.e. either fails to start the hibernation, or is unable to complete the process (I can always tell if power was lost during hibernation because of the characteristic of the system of protection HD sound). I did several tests, especially in the power saving mode. "High performance" mode power seems to be a little more reliable, but still fails to shut down less than 5% of the capacity. The level of Hibernate by default on the Toshiba Windows Vista pack is as low as 2%, so I can wait until it is able to work at this level.

  Overall the battery capacity is about 1 h (Media Player, fashion high performance, maximum intensity) at all about 2 to 2.5 hours (slowed or text editor, mode, brightness low power saving). Charging time is about 1 hour (seems too short). They are difficult to objectively assess that Toshiba avoids quoting the specifications of the battery, but I consider the question of the reliability of the above as being a serious (do not want to take the risk of damaging the HD). I am considering visiting the service center, but leaving both the computer and the battery with them would be a nuisance for me and I would rather avoid it if I can. I wonder if I can claim the warranty on the battery alone?

  Any suggestions would be welcome.

  Background information:
  -The U300 is a few weeks old.
  -The battery has been fully charged and discharged (approximately 15 times since purchase).
  -Cooldown takes 1 h - 1.5hrs
  -J' using Vista Business
  -J' went through the power settings to make sure they are ok and to change threshold levels
  -I am an experienced business user, I use a laptop computer at work which stops always perfectly to the power level of 3%

  Thanks for help

  Zawrek

  Hello

  > Overall the battery capacity is about 1 hour (Media Player, fashion high performance, maximum intensity) at all about 2 to 2.5 hours (slowed or text editor, mode, brightness low power saving). Charging time is about 1 hour (seems too short).

  Reading your post, I do see no battery issues! Everything you say is right and not a malfunction.
  Please note that the Vista operating system needs much more computing resources and the battery is much more emphasized running Vista!

  Please also note that the level and time to discharge the battery can be different! Everything depands of the use of the laptop!
  All the portable devices and parts waste the power of the battery at the same time and that's why there are differences in the discharge procedure.

  Don t be afraid and take advantage of your laptop but if you think you will need to contact the ASP in order to clarify this issue, then feel free to contact service technician.
  They should be able to help you.

  Good bye

• L50 - A - 160:USB of power in standby mode satellite is disabled but it STILL works

  Hi all!

  It's my L50-A-160.

  USB power standby is disabled in the BIOS but it always on!
  Nothing helps.
  As I can not turn off wakes on keyboard events. BIOS 1.30.

  Thanks for the advice in advance.

  Hello

  You are talking about sleep function & expenses supported by some USB ports?

  Be aware that not all media ports USB Sleep & Charge and only marked with a small sign flash USB ports would give such function.
  As far as I know on Satellite L50-A-160 only USB 3.0 (on the right side) would support this sleep & Charge USB.

  The charge & sleep can be enabled and disabled in windows.
  Go to desktop-> Office Assistance (in the task bar)-> utility tools & -> Control Panel

  There you should find the different tabs and one of the tabs should have sleep & fresh / tab sleep & music which allows you to set advanced features for the mod, Hibernate standby mode and stop mode.
  Simply move the slider to activate or deactivate the function sleep & Charge.

  But the sleep & fees may not work with certain external devices even if they are compatible with the USB specification. In this case, turn off the power of the computer on the charging device.

  You should also be known that when sleep & cool man of wake-up function is activated USB does not work for the compatible ports.

  In addition, there is an option called function in battery Mode. This option can be used to toggle the sleep & Charge in battery mode. It also displays the remaining capacity of the battery.
  Simply move the cursor to enable or disable this feature.

  By the way: read the user 95 manual page. It would be useful for you.

• Problem to mode s & q media

  Hello

  Having a problem with the media of switching to high speed. If you leave a card run to the end, you get a nearby warning, then a support full message and it will stop recording when there is unused capacity of full sxs pro + in the other location.

  Sought and did not see any mention of him can someone else similar.

  If I stop the recording of hfr with some space left and drop s & q at a normal rate, start recording again it will switch automatically as expected.

  Thank you.

  Just re-read the manual. No media covering mode hfr.

• Replacement battery high capacity NB305 - PA3734U-1BRS

  Another question relates to one of my previous related post.

  It seems a good replacement battery high potential capacity for my NB305 PA3734U-1BRS.

  My question is:

  Someone at - he bought one of these and if so, is is much better / it lasts longer than the original battery?

  Thanks in advance

  Hello

  I think you are talking about this battery:
  http://us.Toshiba.com/accessory/PA3734U-1BRS/

  Mentioned here, its that the battery would go up to 9 hours in Normal Mode
  But I have to say that the working time of battery depends always on notebook use, this means that the brightness of the upper display, HDD high run time or high-performance CPU and GPU would decrease the battery considerably working time.

• Satellite A100-19: battery capacity lower when using Vista

  It is my another problem with Vista Ultimate after using XP. Before installing Vista (I mean using XP), my battery capacity is almost 2 hours but after installation of Vista, the capacity fell suddenly. After fully charging, when I plug in the adapter, the battery shows 44 minutes remaining understood fully charged.

  I would also like to add that this 44 minutes is seen in the energy saving mode and brightness is at the minimum level.
  What can be the problem? My battery is dead?

  Do I need a new battery?

  Hello Alain

  read the various PC magazines, last 12 months, I found a lot, but really a lot, articles on Vista and all of the issues using the Vista operating system. All those who wrote all that was unique in one thing: Vista needs much more resources than Windows XP Home edition and you shouldn't be surprised with your discovery.

  Sorry I don't have any other comment. Maybe you should take more time and pick up info on Vista read different magazines PC or simply Googling autour.

• Qosmio F60-136: Impossible to disable the USB sleep-and-Charge in hibernation mode

  USB sleep-and-Charge function is marked as disabled in BIOS (v2.70).
  This can be checked with Sleep Utility (v1.4.1.5) where the function also seems to be disabled.
  During the stop of my laptop, smart phone or the stop MP3 player to charge.
  Everything is OK down there.

  However, when putting my laptop in * hibernation mode *, my Smartphone and my MP3 player continues to be charged!
  It's a real problem, because, even if no device is plugged into the USB port, in hibernation, the battery loses capacity quickly (much more when the laptop is turned off completely)

  * Obviously a bug in this feature. Please provide a fix as soon as possible! *

  _Environment details: _
  Toshiba Qosmio F60 136
  BIOS version: 2.70
  THIS version: 2.40
  Version of the utility of sleep: 1.4.1.5

  Hmm interesting
  Have you checked if the sleep and the load is disabled in USB Sleep and Charge Utility
  If please don t mix USB Sleep and Charge utility and utility of sleep.

• Satellite M100 detect only 128 GB of capacity of a disk of 320 GB HARD drive

  Hello

  I have a M100 with XP - SP2 and bios version 1.2
  I installed a new internal 2.5 "320GB Seagate hard drive - after the XP Disk Manager, Toshiba Recovery disk recovery detects only 128GB total capacity. There is not yet any unallocated space. But I have no 320 GB of space...

  I would like to ask if the phoenix 48-bit LBA compatible bios?

  Kind regards
  Tommy

  Hello

  I think that this has nothing to do with the BIOS
  The LBA is rejected in the HARD disk controller and it seems that the IDE controller supports only the 28-bit LBA.

  The ATA - 6 defined as Ultra DMA/100 (also called Ultra DMA mode 5 or Ultra-ATA100) supports the 48-bit LBA but first controllers IDE ATA - 5 and lower supports LBA 28 bits.