Captivate 3 - skin file rid!

Similar Questions

• Since the last update, no quickly captivate republish us files not displayed

  (go to "I will break the problem the better as I can" to avoid the mug shot )

  Essentially, we have nearly a hundred e-Learning course, we made using captivate who goes back as early as captivate 4.  We were upgrade through the versions we're going and where there have always been small glitches that arise this precise sense of the list.  It is not yet a upgrade version, just a small patch (which seemed to add the ability to resize the bits 'Issue X of Y' on question slides).

  So, does anyone have any help on this problem?  Adobe have been so far not very useful, which offers essentially the wisdom and clarity that comes with years of not trying to solve the problems. Their advice being basically repeat each course from the ground, which will take a LOT of time (and for what? to correct their error?).

  I'll break the problem better than I can:

  Since the recent patch to Captivate, pre-existing files that we publish again does not appear on computers windows but fact screen on Ipad, etc.  Upload to a server does not resolve the problem, it remains the same.  The internet window opens the same as usual, but after a brief loading bar the moment, the window remains empty.  A check of the code indicates that the files are loaded but simply do not display in any form.  If we publish a completely new file, it displays very well. The type of browser does not affect the problem.  We also found that if we go in the console and use a command to pass to, say, the second image, it works!  So the question seems literally with the display in the first place.

  Thanks in advance if anyone can help even suggest ways to work around this problem, it came at a terrible time when we need to make changes and present to another company but may not even see our published files.

  The most recent update (Captivate 7.0.1.237) changed the AutoPlay by default for all our courses on. Given that we have not changed the settings personally this was easily overlooked, and the Autorun feature doesn't seem to work.

  I tried to run cpCmndGotoSlide = 2 in the console of the web developer and it caused the course at startup, which makes me realize that the course was in effect of loading (I saw that certain content loading in firebug but that he was not certain what about if it was essential files) but just not play and I noticed while studying that.

  If it's just a case of disabling AutoPlay for the course in the publication settings.

  I also think as a note that our classes were always working on iPad, it's because products apple not supporting automatic content playback, especially if it's audio.

• Captivate 4 project files can be opened in Captivate 5?

  I was wondering if captivate 4 project files can be opened in captivate 5? I know that captivate 2 project files cannot.

  Thanks guys,.

  Kya.

  Hello and welcome to the forum (see this is your first assignment).

  Normally there is no problems opening files-CP4 CP5 to: they will be converted, including the advanced actions (if any) and AS3 if the CP4 was AS2 as CP5 only supports AS2. I had only a few rare problems with these conversions.

  ATTENTION: you will not be able to open the converted file in CP4 more. As always, be sure to keep the original files stored somewhere safely.

  Lilybiri

• Captivate 6 skin Border - right border are not displayed

  I use Adobe Captivate 6.0.1.240 and Windows 7 Professional.

  I have a new project that I created with Captivate (run in administrator mode) 6.  This project was not imported from the PPT, and it was not created in an earlier version of Captivate. New fresh project only never touched by 6 Captivate.

  I'm in the early stages of development, and all that I have in the project so far are the images and text captions - no animation, no interaction, no effect is set up, no shadow applied image.

  I configured a skin with a border and the right border shows intermittently. In this case if I noticed the next 5 slides, preview in a web browser, or publish files and execute them in Internet Explorer or Firefox.

  I have turned the skin market, changed the skin, deleted my files published and republished force fresh.

  I have edited all my images in PhotoShop to make sure none of them exceed the width of my project, updated images in the library and reviewing the whole image and the master slide settings to ensure no image go off the stage.

  The best I could achieve, is that at least some of the slides show the right border.

  I saw a post from a similar question published in February and a response indicating a fix would be held with a patch soon, but I've not found anything more about the correction.

  Any help would be appreciated here.

  Thank you

  Tichelle

  As a solution to this problem (because I hate to leave things hanging open), I want to add that I had missed the re-sizing some of my images. I had few more who have an original size which exceeded the size of the stage. As I went back through my images and resized in PhotoShop, I managed to clear up this issue on most of my slides.

• Windows Media Player failed to open the skin file

  Opening a file on the media player that has a skin.

  Hi, I tried to open a file, but received a message saying that the media player has encountered an error. He continued to say that the file may not be valid. It is important that I get this open. What could be the problem or what can do to solve it?

  Hi, I tried to open a file, but received a message saying that the media player has encountered an error. He continued to say that the file may not be valid. It is important that I get this open. What could be the problem or what can do to solve it?

  ===========================================
  Googling turns upward the following links...

  Good luck to solve the problem...

  Warn when opening a file "skin".
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/5739ab96-A980-478C-94BC-a9e0d4db2e6b

  Player Windows Media 80070716 error cannot display a skin
  http://www.Windows-Media-Player-updates.com/windowsmediaplayererror80070716.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Skin file?

  I am trying to listen to a recording of the teleconference, and it says that the file isn't valid.  What is c? How can it be solved?

  Skin is normally how the appearance of applications is defined. Popular multimedia applications the best known are probably Winamp.

  Once downloaded it had an appearance by default, but you can download skins to change any number of designs.

• What is the size range expected for a Captivate 8 .swf file?

  I'm working on a project where our .swf around 30 MB files, which seemed reasonable compared to those that I produced for a previous customer, working also in 8 Captivate. However, the LMS say it's too much, because a 1-2 MB Flash files are considered as large.

  A typical course is 40 slides, linked to a PowerPoint presentation. By compressing the images in the .pptx to 96 DPI and Captivate editing to low quality, I reduced the file size to 15 MB.

  These file formats are great for Captivate?

  15MB is very reasonable! I worked with much larger files. I think that your LMS people is a bit 'dated '? Especially if you have audio files, 1-2MB is almost impossible. They probably think of small animations, not interactive courses.

• Captivate 8 HTML5 file does not load

  The published version of a Captivate 8 draft published in HTML5 works fine on the development server (i.e. my laptop), but fails to load in any browser from the production server (the link is http://www.clearcreeklearning.com/emcycle/index.html). The host (Godaddy.com) insists that the problem is in the index.html file which I would download if I was allowed to. Is this a known issue? Any ideas on what might be preventing it from loading?

  Basically, all your content is in the CPM.js as a big JSON object. There are some foreign assets, but all your courses and advanced actions are in this file. If it encounters a fatal error that does not load your course. I found this line that was the mistake of launching and removed 2-3 series of / / and it worked.

• From web server to the Captivate of HTML5 file variables

  I publish a quiz in Captivate as HTML5 and host it on a Web site. I would like to know how I can move my site to the HTML5 based Captivate quiz data.

  So far, I have had success are given on captivate by having the file POST the results of a quiz finished in a RESTful way. However, I have not had success put data in the file. I would like to transmit information such as the user ID and the ID of the quiz, maybe same position current slide so that I can match quiz information to my database. I'm not specifically looking for a solution to the user ID, ID quiz, etc. because I can be creative, in this regard, I just want to know if others have been able to define variables when the Captivate file loading.

  I tried a definition of the variables in two ways:

  -Declare the variables with javascript, ajax, load the page in a div. Because of the problems of dependence from the captivate file uses relative paths to the assets folder.

  -Change the published html file by adding the javascript variables, this returns an error message saying that I can't replace the existing captivate variable

  -Add js variables in the init function, this has no effect.

  Simply pass the username and id I used the following.

  Note that the URL contains query string parameters that correspond to variables in captivate

  http://mywebsite/course/index.html?cpQuizInfoStudentID=IDHere&cpQuizInfoStudentName=Studen tNameHere

  Another way to use JavaScript to read the query string and the variable of the entitlement in CP for query string values. I remember reading some more detail, but can't remember where.

  It may be useful

  Luke

• Audio files recorded in Captivate are wav. files. You can record in mp3 format?

  Apparently, we need the mp3 file to upload to the lms. This been done? If so, how?

  I already recorded audio with a usb microphone.

  Sabrina S.

  You misunderstand me. When published the WAV files are converted to MP3 by Captivate; which is a compressed format (same way images will be compressed as well). So it shouldn't be a problem.

  WAV offers you the best quality, I tend to import WAV for audio clips in the CP, but you can also import MP3s with no problems.

  Lilybiri

• don't play only in the preview of captivate project SWF files

  I tried to import a file .swf product of Camtasia 6.0 in a captivate project 3.0, after doing so when I'm in any .cp with files .swf in them and I try to get an overview of the project files .swf will not play. All the files published .exe will play, as do the .swf files displayed individually simply not to Captivate. Any ideas?

  I found the answer - I had upgraded to Flash 10 and it is not compatible with Captivate 3. I uninstalled Flash 10 and installed Flash 9 and now I can listen to extracts projects which have files .swf in them.

• 8 not supported by Captivate 1 flash files

  I work in Captivate 1 and is trying to import a Flash file in Flash 8 Macromedia professional, I created. I get the following message from Captivate 1 "Macromedia Flash 8 files are currently not supported".
  
  Any ideas? Does anyone know how to get around this?
  
  Thank you very much
  Veronica.
  
  
  
  

  WOW! WOW! WOW!

  Whapeee!

  It worked! Thank you John 1 million. You're a very smart cookie.

  Until next time,.
  Veronica.

• skin loading error: file not found

  Impossible to stream/watch videos from PBS.org using Mozilla Firefox. No problem in contrast with Internet Explorer. Error message: "error loading skin: file not found."

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Updated a Captivate 3 to 8 Captivate file

  Hello

  I have an old file created in Captivate 3.

  I am now on 8 Captivate and formulated a hypothesis if I opened the file in Captivate 3 in Captivate 8 software would update the file so I could edit in Captivate (other software I use is automatically) 8.

  This doesn't seem to work with Captivate and I hope someone can tell me how I can edit files of CP3 at the CP8.  I have more access to the CP3.

  The file I have is a .cv file, but when I browse 8 Captivate for the file it is only looking for .cptx, .cptl, .cpvc.    YIKES!

  Thanks in advacne to any suggestion you may have.

  Thank you!

  Sherrie

  The extension of the Cp files replaced by cp cptx with version 5. Your version of 3 is 10, which means an eternity in the world IT. "other software"? Not an application with a complexity of Captivate, sorry.

  If you want to update (that I will not recommend, because I'm sure that you'll spend more time trying to fix all the mistakes when creating from scratch), you will need an intermediate version (5 or 5.5) and do a two-step upgrade. Since CP5 AS2 is no longer supported, which means that you must first display files and exit all the objects of the AS2. Since you don't have access to the CP3, it will prove very difficult.

• Cannot open file Captivate 4 with Captivate 8 program

  Hello

  I can't open the Captivate 4 with Captivate 8 program file.

  I tried to open some projects I created with Captivate 4, but without success...

  So much has changed between the versions. You need an intermediary

  version 5 or 5.5. But even in this case I recommend you start from

  scratch, because the amendment process would take probably more time than

  recreating.