Captivate 8 - button if the user failed
Hello
I'm doing resume button appears only when the user has failed. Is it possible to export HTML?
Thank you.
No difference between the output HTML or SWF. I tried to describe the design of the Question and score slides:
Question Question slides in Captivate - Captivate blog
Question Question slides - part 2 - Captivate blog
Tags: Adobe Captivate
Similar Questions
-
Hello
I have a requirement to disable the first/previous/next/last buttons when the user clicks on the button "create". The must be enabled after the user clicks on the submit, and then the button "validate".
Is this possible please?
Thank you.
Hello
Using BC4J in the model layer? If so, you might use an EL to the property of disabled button. Something like
Replace
in the binding attribute on your page (preferably the primary key of your form attribute). Arun-
Edit: Check out this blog for more information on this EL: https://blogs.oracle.com/adf/entry/highlighting_new_rows_in_adf
-
I just install my new Iomega PX4 - 300 d and have enabled security. When I go to the users section and groups, there is no Add button to create new users or groups.
The Add button is available in other sections and I created with success of new volumes/shares.
I read the instructions and following the guides online without success.
Is there another setting that I missed?
He solved.
I disabled the security and then reactivated it.
The add users/groups button reappears.
-
ReadyNAS 202 connecting via a browser of the user fails
Similar problem as discussed in the section https://community.netgear.com/t5/Using-your-ReadyNAS/readynas-104-user-login-fails/td-p/1025727 , but now for a rn202.
Followed the instructions as stated in http://kb.netgear.com/app/answers/detail/a_id/23178 but after entering the user credentials for the log in window remains reappear.
RN202 is not mentioned in the list of the models as solutions applies to.
Any suggestions?
I do not use HTTP, but I see that it is grayed out if you try to activate, so I guess it's true.
-
PRVF-4007: verification of equivalence for the user failed
Hello everyone,
I work a 2 node RAC installation, I installed CARS many times before, but I just ran the script with these settings
runcluvfy.sh stage pre - crsinst - n rac1, rac2-verbose
The last time I ran it I don't have these errors, but I think I used the user account name "oracle."
but this time I'm using another account of Linux, you have to use the name real = oracle for the account name?
The Linux account I use is not called "oracle".
This is the error I get when I run the script...
[oradest@rac1 grid] stage pre - crsinst - n rac1, rac2-verbose $./runcluvfy.sh
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node "rac1.
Accessible destination node?
------------------------------------ ------------------------
rac2 yes
rac1 yes
Result: Check accessibility node from node "rac1.
Verify the equivalence of the user...
Check: Equivalence of the user for the user "oradest".
Comment by node name
------------------------------------ ------------------------
Rac2 failed
RAC1 failed
Result: PRVF-4007: user equivalence verification failed for user 'oradest '.
ERROR:
Not available on all specified nodes user equivalence
Verification can take place
Check prior to the installation of cluster service failed on all nodes.
Yes, you can use a separate account (e.g. "grid"). In fact, I always recommend a separate account, especially from 11 GR 2.
Must user equivalence be configured. It is documented in the installation guide. You can use the installer universal to facility user equivalence if you don't want to do it manually.
Hemant K Collette
-
Hi all
Can't seem to understand this one. I had assumed it should be fairly easy, but not... I'm quite inexperienced with variables so, maybe someone could help?
Basically, the case is quite simple: I want a next button to be invisible until a user has clicked on several areas of click on a slide. Each box click click should disclose additional information on a topic. When all topics have been read, I want the nest button to appear.
Any suggestions on how I could do it with as little effort as possible? Maybe I don't even have to use variables?
Help much appreciated!
Rgds,
Casper
Here's a forum thread where I introduced myself as a combination of two decisions:
Re: Can I use conditional and advanced actions on the same button?
An old article in which I have explained how to combine a standard action with a conditional: combining conditional in a fast action and standard
Slightly different, because there is a sequence (which is not the case for you) and so that a variable is required: Blog after Posterous? - ClickClick - Captivate blog
Learn more about the possible events to trigger actions: http://blog.lilybiri.com/events-and-advanced-actions
Lilybiri
-
The user must pass the quiz to continue
Captivate v5.5
If I create a quiz with a passing grade (80%) and set it to "Pass Required" - what exactly happens after answering the last question of the quiz and does not reach the required 80%?
A recovery button on the results screen that they click?
If there is a recovery button - where to take them - the departure of the quiz, or start or project or can I determine this?
Thank you
Don'tL
Recovery is that if you allow several attempts on Quiz level, has nothing to do with the pass required.
If the user fails, and exhaustion of attempts (little contradictory with mandatory Pass, I would fix Quiz attempts to many,) action "If lack of Grade" defined in Quiz preferences, success or failure, will be executed.
-
How to customize the 3 buttons on the front of the Portege R400?
I wonder if it is possible to customize the function of the three buttons on the front of my R400?
For the moment, they seem to do nothing. I would use both of them as PgUp and PgDn display documents in tablet mode.
Using the program "Toshiba button Support" I am only able to set the knob to "e-mail" under the screen.
Documentation, forum, knowledge base do not mention anything about the R400 and three buttons. At least not how we define their function.Is to customize their possible at all?
Hello
What buttons do you mean exactly?
As far as I know there are 5 different buttons;
-Switch
-Cross-functional button
-ESC/display rotation button
-Windows Security button
-Toshiba email buttonThe user manual must provide details of the simple buttons.
But as I m don't me wrong, the configuration button is not editable. It's fix.You're right about the utility of Toshiba button support. This utility controls the functionality of the mail button. It is a single button that can be configured and you could assign an application to the it.
Concerning
-
create documentation for the user
I have a simple...
I have a panel tabs. A tab is called DOCUMENTATION. I would like to have a button that the user can push that provides a context menu or the flight hover-text (maybe two) that contains some relevant troubleshooting information for the use of the physical instrument. Is attached to my style of fishing-line/duct-tape/man caves to do, there must be a more elegant way.
My VI runs in a loop, so I need something that can handle in a loop.
Thank you!
See attached example.
You can also add the tip Strip directly by clicking with the right button on control > properties > Documentation > advanced band.
Run vi, click on the button if pop poster has it before use... Just added the event structure. Place your mouse on the same button it will show same help text in the edge Strip.
Is that what you want?
-
Can I call a function that is in the main window of the application, the user interface of the App menu with an event listener in the main application to listen for a click of a button in the user interface of the menu?
Example:
(UI button in swipe-down menu in UI.as) ... ResetButton = new LabelButton(); ResetButton.label = 'Reset view'; ... (code in MyApp.as) ... private var ui:UI; ... public function MyApp() { ResetButton.addEventListener(MouseEvent.MOUSE_DOWN, resetView); ... }
Where resetView is a function to restore the default view of the application.
@tensioncore: PageViewStack.as stores its current page variable _current_page private and at least the version I uploaded, which I think is current, is not a function for this variable get accessor. But it's easy to fix. Simply add this code to your local version of PageViewStack.as:
public function get current_page():DisplayObject { return _current_page; }
and then in your code where you need to check that your page view stack is currently on the page, just make reference
this.stack.current_page
Give that a try & let us know how it goes...
-
I created a table with two buttons, when the user selects the button Add, it adds an instance, which works very well, but there is a section under the table and the three fields. Whenever a row is added, it overlaps with this information. I did not allow for page breaks, but I do not get a new page. Any help will be greatly appreciated
Make sure that your subform Table and the subform text are contained in a Flowed subform. In this way the subform parent that contains everything that the page is allowed to flow the content of the page. As subform Table grows, it can hit subform text down.
Good luck
Mark
-
Captivate 6 buttons do not work when load in Flash. Help!
I created a content player that load SWFs and plays them with some basic commands. It is able to load in Captivate 5 and 5.5 without problem. However, now when I insert into Captivate 6, buttons in the Captivate content do not work. I can get the bearings the trigger clicks, but not button.
Any thoughts?
I solved it. It had nothing to do with Captivate (that I know). All this had to do with how I manage Captivate content loaded inside my flash application. It had to do with the scope and timing of how I was Manager the loaded content. If someone wants to know the details, I would be happy to disclose but I think that this is something quite unique in my own code structures.
-
Maxi of approval when removing the user from the user profile
Hello
I have a requirement like
I have configured AD as auto updated in service.
How to configure the approval workflow, when the administrator to remove the user from the user profile (form xellerate).
FYI, the Delete assigned task as cancel the task for the user to create
Thank you
Published by: user11963802 on December 15, 2010 02:31Create an approval workflow and create a rule for the determination of the process like
If
Action request == "revoke".Attach this rule with RO.
Hey sorry
I shared information Revoking user of the target Application.
Hide the button remove the user from JSP
You can create a model with approval workflow resources to remove the user. And after getting the approval, you can use API DeleteUser to remove the user from the IOM.Published by: Rajiv Dewan
-
Button on the main timeline control movieclip
Hello
I have a stop in my main script. At the stop, I have a play of movieclip. In the movieclip, I'll have a video playback. After playing the video, I have a button for the user to continue playing until the end of the movieclip. Once the movieclip is done, I want back the return to a specific image in my main script.
I can't figure out how to make this work. Anyone have any ideas?
Thanks in advance,
Paul
How much of what you just described in currently working properly?
If it's just the last step to have the game finished main scenario the movieclip, then you might have an event listener assigned to this movieclip in the main timeline. When the movieclip ends it can send an event of this listener that can trigger an event handler function in the main timeline to tell the main scenario for continued as planned.
Another less glamorous but more compact approach might be to have a drive inside / at the end of the movieclip to order the main scenario of an act using something like...
MovieClip (parent) .gotoAndPlay (whatever);
-
OK, here's my story:
Windows 7 Home Premium, solid running, since 13/10/09History of failure of 974431 update that the next day, he managed without my taken part troubleshooting. No complaints since more about 1 week ago got a BSoD outside no where while my child is on a restricted user account using IE. Has not returned since, but suffice it to say.So now it's 26/01/10 and an update to install Windows Defender K915597 with success. Cool deal. It end tonight here and he says it is to install the updates and then stops. Next day:1/27 - KB976972 failed1/27 - KB978506 failed1/27 - KB977074 failed1/27 - KB976972 failed1/27 - KB978506 failed1/27 - KB977074 failed1/27 - office Live add-in 1.4 successful1/27 - KB976972 failed1/27 - driver update successful1/27 - KB977074 failed1/27 - KB976972 failed1/27 - KB978506 failed1/27 - KB977074 failedSee a pattern here? So I should also mention that all of a sudden if I click log off or switch users while one of these updates says waiting and not pass/fail it hangs on Please wait... I waited about 10 minutes (normally it's about 10 seconds for the newspaper and immediate to change user) then have to restart the computer or force the feeding cycle. So I decided to uncheck the Group of updates and just try one at a time through the automatic updates.Wait what he...1/28 - KB976972 successful1/28 - KB978506 successful1/28 - KB977074 successful1/28 - KB915597 successful (Windows Defender again)Hooray! life is good again!It end tonight here and he said please wait... Configuration of windows or something like this. Odd. Given that all of the updates succeeded and I had no updates available message. Well it stops down.On the morning. Please wait while windows configures (or other) updates failed returning changes. What updates? They managed you cursed!29/1 - KB976972 failed (what Wait. What?)1/29 - KB978506 failed (what Wait. What?)1/29 - KB977074 failed (what Wait. What1/30 - KB976972 failed1/30 - KB978506 failed1/30 - KB977074 failed1/30 - KB978506 failed (me trying just the update to the compatibility mode)1/31 - KB977074 failed (my download and try to install the update manually)So there is some sort of timeline for what it's worth. So basically three updates repeatedly failing and play with my head. Here are the error codes for each of them:Update for Internet explore 8 Compatibility View List for Windows 7 (KB978506)Installation status: failedError details: Code 80004004Update for Windows 7 (KB977074)Installation status: failedError details: Code 80004004Update for Windows 7 (KB976972)Installation status: failedError details: Code 80004004More potentially useful data. I have manually install a (977074), said she is successful and I want to reboot, Yes, please wait windows configuration, stops, comes up, please wait configuration updates, no error, log, look at the history of the update, says "pending" 977074 next, I reboot on mine, please wait windows configuration, stop , rises, please wait for configuration updates, UPDATES COULD not return changes, allows me to connect... She does it every time.So I think I'll just deselect all and hide updates, screw it right? I don't really have the situations these difficulty going home anyway. So all deselected. No found update, green check in Windows doesn't update. Everything is cool. Stop this night here, please wait windows configuration, stops, appears, wait for updated configuration to update, UPDATES FAIL back.And yet, he is suspended when the logoff or switch user thing.Seriously. What is going on?Hello
First, install the system tool using the link provided: http://support.microsoft.com/default.aspx/kb/947821
Then, run boot.
To help troubleshoot error messages and other issues, you can try to troubleshoot this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:Clean clean boot.
1. click on start, type msconfig in the search box and press ENTER.
The user account control permission.
If you are prompted for an administrator password or confirmation, type
password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load starting points.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:http://support.Microsoft.com/kb/929135
Reset the computer to start as usual.When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
When you are prompted to restart the computer, click on restart.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click the Start button, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
2. on the general tab, click the Normal startup option, and then click OK.
3. When you are prompted to restart the computer, click on restart.
If you are still experiencing a problem, try the following:
I suggest to download the update manually and install it. Use the link below to download the update.
http://www.Microsoft.com/downloads/details.aspx?FamilyId=6711bec7-130F-4244-A13C-675bd9e42298&displaylang=en
If this does not resolve the issue, I suggest you to reset windows update by following the steps listed in the article below:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
You can also use the "Fix it" described in the article above solution.
For more information on August 2009 Windows Vista and Windows Server 2008 Application Compatibility Update, follow this link:
http://support.Microsoft.com/default.aspx/KB/972036Thank you, and in what concerns:
I. Suuresh Kumar-Microsoft Support.
Visit our Microsoft answers feedback Forumand let us know what you think.
Maybe you are looking for
-
Why some of the "add to for fire fox" is yellow and some is green?
Thank you!
-
Satellite X 200 - 21 K - what current readers should I install
Hi all I just sent my laptop for repair, Ii is currently experiencing vista windows on it and I would support cause I will format.I have a not so recent model and it's hy I need assistance. My question is what is the current readers, should I install
-
Y560 wireless connection problem
Yesterday I bought a Y560. I like it so far. Only one problem. I'm unable to connect to my WEP wireless network (you'll have to keep WEP) but was able to connect to a WAP network. Help, please.
-
How to identify files that may be deleted without jeprodizing the files needed to run the system?
-
I recently changed my DV7 Windows 7 password and now I can't remember it. I can log on as the fingerprint app knows the password and am currently using this laptop. Over the past two days, the fingerprint app stopped working on some of my many time l