ReadyNAS 202 connecting via a browser of the user fails

Similar Questions

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CONNECT IN a loop in the user data

  Could someone help me because I can not find a solution.

  I want to build a tree of 3 tables (parent-> children-> detail)

  Everything works fine with 2 tables, but when I add the third table I get always an error ORA: ORA-01436: CONNECT BY a loop in the user data

  CREATE TABLE nineham (organisatie_id NUMBER

  (, naam VARCHAR2 (50));

  --

  CREATE TABLE seizoenen (seizoen_id NUMBER

  organisatie_id NUMBER

  (, naam VARCHAR2 (50));

  --

  CREATE TABLE competities (competitie_id NUMBER

  seizoen_id NUMBER

  (, naam VARCHAR2 (50));

  --

  INSERT INTO nineham (organisatie_id, name) VALUES (1, 'ORGANISATIE_1');

  INSERT INTO nineham (organisatie_id, name) VALUES (2, 'ORGANISATIE_2');

  --

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (1, 1, 'SEIZOEN_1');

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (2, 1, 'SEIZOEN_2');

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (1, 2, 'SEIZOEN_3');

  INSERT INTO seizoenen (seizoen_id, organisatie_id, naam) VALUES (2, 2, 'SEIZOEN_4');

  --

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (1, 1, 'COMPETITIE_1');

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (2, 1, 'COMPETITIE_2');

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (3, 2, 'COMPETITIE_3');

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (4, 2, "COMPETITIE_4");

  INSERT INTO competities (competitie_id, seizoen_id, naam) VALUES (5, 2, "COMPETITIE_5");

  --

  --

  --

  SELECT LPAD (' ', LEVEL * 2, ' ') | Naam AS display

  LEVEL AS lvl

  DE)

  SELECT NULL AS parent

  child organisatie_id

  naam

  To nineham

  UNION ALL

  SELECT organisatie_id AS parent

  child seizoen_id

  naam

  OF seizoenen

  UNION ALL

  Seizoen_id SELECT parent

  Child AS NULL

  naam

  OF competities

  )

  START WITH parent IS NULL

  CONNECT BY PRIOR child = parent

  ;

  Hello

  When you perform a CONNECT BY query, you must have an identifier unique to each child.  You use numbers that are unique to each table, but are no longer unique when you UNION the paintings together.  When the query finds children 1, the fact that average organisatie_id = 1, or does that mean seizoen_id = 1, or does this mean competetite_id = 1?

  Etbin suggested you change data.  Which can be difficult; It might not even be possible.  In addition, you must make sure that the new IDS are unique.  When you assign advent = 10 to a node, for example, you must be sure that 10 is not an organisatie_id.

  Here is another solution that is guarranted to generate unique IDS, without changing the actual tables:

  SELECT LPAD (' ', LEVEL * 2, ' ') | Naam AS display

  LEVEL AS lvl

  DE)

  SELECT NULL AS parent

  organisatie_id AS child

  , 1 AS the level of

  naam

  To nineham

  UNION ALL

  SELECT organisatie_id AS parent

  seizoen_id AS child

  , 2 AS the level of

  naam

  OF seizoenen

  UNION ALL

  SELECT seizoen_id AS parent

  Child AS NULL

  , 3 AS the level of

  naam

  OF competities

  )

  START WITH parent IS NULL

  AND level = 1

  CONNECT BY PRIOR child = parent

  AND layer = FIRST + 1

  ;

  The composite key formed by your original ID, and the new level number is unique.

  Note that the query above is exactly what you have posted, with the addition of the lines that refer to level.

• VC connection via a browser?

  Hello

  I need to set up Equallogic ASM/VE to connect to my SAN and VC. It connects to my SAN fine, but I just get the following error:

  ' Not connected: unable to connect to the VirtualCenter server: » ' http://server/sdk '

  If I connect to this address via a browser, I get only a blank page. Can anyone advise what URL should I use? My VC is 2008 if that makes a difference?

  According to the guide here:

  http://www.EqualLogic.com/ResourceCenter/assetview.aspx?ID=7369

  You simply enter the name of the server as:

  vCenter

  not

  http://vCenter/SDK

• How to prevent the login page in the same browser when the user is already authenticated

  Hello

  I use Jdev 11.1.1.6 with ADF implemented in my application security.

  I have Login.jspx that redirects the user to Home.jspx on a successful authentication. The user can either enter the URL of the Home Page or Login.

  Please consider the following scenarios:

  (a) the user is not authenticated in the current browser session

  (a.1) if the user enters the URL of the home page and the login page is displayed and redirected to the homepage on authentication

  (a.2) if the user enters the login page URL, then the login page is displayed and redirected to the homepage on authentication

  (b) the user is already authenticated in the current browser session, a new tab opens and

  (b.1) if the user enters the URL of the homepage then it shows directly the (already authenticated) Homepage

  (b.2) if the user enters Login URL then connect a page appears - This is the issue, it should either user to the homepage or invalidate the existing session and let users to proceed again.

  How do I get there? Any help is appreciated.

  Thank you

  JAI

  Hello

  the authentication check must be in a phase listener or servlet filter. If you use a phase listener and the homepage and login have a link associated with the ADF (PageDef file) then in the phase AFTER RESTORE_VIEW, you can use AdfContext.getCurrent () .getSecurityContext () .isAuthenticated () to tell if a user is authenticated or not.

  Frank

• Followed by disconnection of back button of the browser allows the user in application

  Hello
  
  In Application Express 4.0.2.00.07 in the 300 request authentication scheme I defined the logout url to be:
  
  wwv_flow_custom_auth_std.logout? p_this_flow = & APP_ID. & p_next_flow_page_sess = & APP_ID.:101:
  
  It works very well, that is when the user application click on the logout button, he or she is redirected to the page of connection (101) if at this stage, the application user clicks the previous button on the browser, Firefox or Chrome, it is allowed in the application and may exercise as if it never of disconnection.
  
  On the other hand if this same exercise is repeated in Internet Explorer, the feature works as expected, it's that the user cannot return to the application without logging in once more.
  
  Any suggestions on why Firefox/Chrome behaves this way? suggestions in areas to look at pointers would be welcome.
  
  Thank you
  
  Daniel
  
  Published by: on May 22, 2012 zooid 04:03

  Hello

  It is always useful to search the forum first.

  You can start here {message identifier: = 1487149}

  Kind regards

• Connection problem: unable to load the user profile.

  Hello dear community HP,.

  We cannot open a session more although we think that we use the correct password.

  The error we receive is as follows:

  "The user profile Service has no logon. User profile cannot be loaded. »

  Product name (model No.): HP G5250BE - 5 CI3/550 M

  HP G5000 series

  We use Windows 7 Home Premium

  Thank you very much for your help.

  Best regards

  Ludgard

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Husband can no longer connect computer. Message reads ' the user profile service has no logon. User profile cannot be loaded"

  How can I solve this problem? I have Windows Vista.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Dreamweaver connection "How can I get the user name to the other page?

  im a beginner in Dreamweaver CS4 and I'm learning to just watch the tutorial videos...

  I have a big problem...

  ADWCS4 is easy to make a login form...

  
  for these tutorials I watch I have not meet how to get the user to another page name which connect...

  I'm using PHP

  hope you can answer my question

  http://forums.Adobe.com/thread/417437

• PRVF-4007: verification of equivalence for the user failed

  Hello everyone,

  I work a 2 node RAC installation, I installed CARS many times before, but I just ran the script with these settings

  runcluvfy.sh stage pre - crsinst - n rac1, rac2-verbose

  The last time I ran it I don't have these errors, but I think I used the user account name "oracle."

  but this time I'm using another account of Linux, you have to use the name real = oracle for the account name?

  
  

  The Linux account I use is not called "oracle".

  
  

  This is the error I get when I run the script...

  
  

  [oradest@rac1 grid] stage pre - crsinst - n rac1, rac2-verbose $./runcluvfy.sh

  Conducting due diligence to install cluster services

  Audit accessibility of node...

  Check: Accessibility of node of the node "rac1.

  Accessible destination node?

  ------------------------------------  ------------------------

  rac2                                  yes

  rac1                                  yes

  Result: Check accessibility node from node "rac1.

  Verify the equivalence of the user...

  Check: Equivalence of the user for the user "oradest".

  Comment by node name

  ------------------------------------  ------------------------

  Rac2 failed

  RAC1 failed

  Result: PRVF-4007: user equivalence verification failed for user 'oradest '.

  ERROR:

  Not available on all specified nodes user equivalence

  Verification can take place

  Check prior to the installation of cluster service failed on all nodes.

  Yes, you can use a separate account (e.g. "grid").  In fact, I always recommend a separate account, especially from 11 GR 2.

  Must user equivalence be configured.  It is documented in the installation guide.  You can use the installer universal to facility user equivalence if you don't want to do it manually.

  Hemant K Collette

• Captivate 8 - button if the user failed

  Hello

  I'm doing resume button appears only when the user has failed. Is it possible to export HTML?

  Thank you.

  No difference between the output HTML or SWF. I tried to describe the design of the Question and score slides:

  Question Question slides in Captivate - Captivate blog

  Question Question slides - part 2 - Captivate blog

• How to share an internet connection Wi - Fi, which requires the user name and password on a laptop computer of Windows 8 on a PC with Windows XP?

  I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...

  Hello Ashan,

  Thanks for the reply.

  You can try to follow the following suggestions to solve the problem.

  First, try to reset Internet Explorer and see if that helps.

  Reset Internet Explorer

  http://support.Microsoft.com/kb/923737

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Additional information:

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.

  (Also works for Windows 8)

  Updated a hardware driver that is not working properly

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How to import bookmarks from another browser of the user of firefox?

  Microsoft suggests using the admin profile / user as its main internet navigation meeting place, I made another account with limited access to security purposes. The problem is that my admin account has all of my favorite Firefox! So basically, I'm trying to import Mozilla Firefox bookmarks to another? Mozilla Firefox browser on my computer! Most of your help import is form ANOTHER browser, Chrome, explore, ect, but not from Firefox Firefox, if you want to. Does make sense?

  Please try to export your Firefox bookmarks first and then import them to your favorite browser, see:

  • https://support.Mozilla.org/KB/export-bookmarks-Internet-Explorer
  • https://support.Mozilla.org/KB/export-Firefox-bookmarks-to-backup-or-transfer

• Connection error: unable to load the user profile

  Original title: user account login

  When I try to log on my computer I get the message 'service user profile Service has not logon.  User profile cannot be loaded.   It is my administrater account, sign in.  If I log in with a different account and try to access user profiles accounts, when I invite me for the password and enter the password nothing happens.  What can I do for this?

  I also have Windows Vista.

  When I try to log on my computer I get the message 'service user profile Service has not logon.  User profile cannot be loaded.   It is my administrater account, sign in.  If I log in with a different account and try to access user profiles accounts, when I invite me for the password and enter the password nothing happens.  What can I do for this?

  I also have Windows Vista.

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.