Captivate 9.0.1.320 jump button problem

Similar Questions

• I disabled the next / jump button in quizzes and do not remember how I did it.

  I disabled the next / jump button quiz and do not remember how I did it. I need to reactivate the it. Oh yes 7 Captivate.

  This will be the problem. You can try an option? There are other means to force the user to answer each question.

• Last channel - Jump button

  Anyone knows where the last channel / channel jump button is located on the remote control. The one that allows you to switch between the last two channels?

  What a way to slow down the drive of photos or personalize to display random photos in the Gallery?

  The Tab key is the last button of channel.
  When you set up the system that is one of the tricks that went flying by.

• Captivate 9.0.1.320 should he the Captivate 9.0.0.223 fix?

  I recently installed the 9.0.1.320 Captivate after getting a new laptop.

  I have Captivate 9.0.0.223 on my old laptop with this fix: Hot fix for Adobe Captivate 9 questions

  I still have to do this fix for Captivate 9.0.1.320 or the hotfix is already installed in this updated version?

  Hot fix is incorporated in the patch.

• Satellite R830 - keyboard button problem:

  Our Toshiba Satellite R830 has a temperament H key. If you press the left side of the key, it works very well. If you press the right side, this isn't. All other keys are fine. This could be the result of debris?

  Is it easy to jump off the key and pop it back on again?

  Well, what you can do is remove the CAP button and check the box under the hood
  You can use a jet of compressed air to remove dust (if available).
  But I think that its some mechanical problem, the point is that the simple buttons cannot be replaced, you can replace the plugs, but not the button so you will need to replace the entire keyboard to get it repaired.

• Focus BasicEditField and buttons problem

  Objective:

  -------------------------------------

  To develop Blackberry app without sequence of focus problem when using the BB with trackpad

  The problem:

  --------------------------------------

  I have 5 BasicEditFields and 5 buttons. All objects are aligned vertically. When I move the finger on the trackpad, update doesn't move from one BasicEditField to another, some are fried, and this happens also with buttons, for example, when the focus is on the first button in the row, and then for some reason when I move the finger on the trackpad button next emphasis is not the one below , but attention "jumps" to the last button. Is possible to set 'order of sequence focus' or something like that?

  If you have Blacberry with touchscreen is not a problem, but if develop you some app for example BB Curve 9360 which has only trackpad, so you cannot select all items.

  Software used:

  ------------------------------------

  Eclipse SDK Indigo version 3.7.2.

  BlackBerry Java plug-in 1.5.0.201112201607

  Operating system:

  -------------------------------------

  Win7 64 bit

  Well, I have the solution

  Don't know why it works, but it does.

  I did two things:

  1.)

  I replaced .add with insert and then add Index numbers

  2.)

  This added to the code:

  protected boolean navigationMovement (int dx, int dy, int, int time status) {}
  Returns false;
  }

  I tried without step 2). but then focus jump bad, in any case, it now works as it should.

  Thank you all for your time and your suggestions.

• Text appears (at random) to Saba, not seen in the slide in the project or in the display film (Version of Captivate 9.0.1.320)

  First report was some text on the button, the shape's text, standard text boxes were not appearing on some slides to SABA. Investigate this, when I open the captivate file I see lack of text on several slides and views of the film. When I click on physically on the text box, shape, or the button on the slide, or in the timeline panel, they appear. I save and close the project. reopen the project itself and the text is not there.

  Here is a screenshot.  You can see that there should be a lot of text on this slide but none shows in these two places. Someone at - he seen this before?

  

  Ok.  Well, if your project has become corrupted, that would seem so, a solution is to try to hide groups of slides and republication to see if you can solve the problem in this way.  If you can, it means that corruption is limited to these slides hidden away somewhere. Then you can refine it further.

  You can also try to copy all the slides on to a new project of the same size file.

  Sometimes, that will remove corruption because it forces Captivate to rename all objects.

  However, if this does not work, you need to think to rebuild from scratch.

• Captivate 7 - scoring number and jump to a slide

  Dear Adobe community,

  I just finished a new project in Captivate 7 (since a user of Captivate 5 years) because open an existing project in Captivate 5 to 7 has proved to be problematic. I have my project constituted by the action scripts where a user can jump from one slide to another slide several times in training.  Everything worked perfectly.

  Then I created my project to allow in LMS reporting.  So that my training course get the completion of the course in LMS, I assigned a click box at random towards the end of the training to contain 100 points.  This way as long as the user clicks the click box, my LMS will mark the full course for the user.  At least this is how I used to run in Captivate 5.  But when I applied the same method to this new project of 7 Captivate, it stopped working correctly.  Specifically, the action where a user can access a slide does not work.

  Thanks to vigorous troubleshooting, I found that as soon as I assign all score (1 point, 50 points, 100 points) to any button or click the box, it will break the jump to a slide action, action is directly associated with a button or contained in an action script.  Also, it doesn't matter where in the project I used to jump to a slide.  As soon as I remove the scores, everything worked as expected.

  So my questions are:

  1. How can I assign points as well as maintaining the jump for a shift works as expected?

  If not, then 2. is there a way to move to mark the full training without scoring?  I used to simulate training as a quick by assigning a point where the user will receive fully as soon as they click on the click box.  Perhaps there is a new way to get around this?

  One question at a time.  Your two questions are quite different.

  Now that we know the jump to slide is allowed to work as long as the passes are required is not defined, we can consider the other question how to get the LMS to mark the completion of the course.

  If what you need for your user to click on an area of unique click for a pass mark of 100% your previously used solution should still work OK.

  Try to use it again with your LMS, but this time leave the setting required optional.

• Smart form withdrawal button problem (it is not so cold)

  Would be useful if someone has a solution for me, but I think it's more a problem with Captivate Smart forms in general.

  I like to use active forms in the form of buttons especially now you can have different States for the normal, over and down. The problem is that the active forms when used as buttons shrink, which in some respects is good because it gives the user some type of visual feedback of interactivity and I think that it is the intention then Smart forms as buttons have been introduced. But here's the problem, if you place your cursor on the edge of the button shape and click shape retracts and is no longer under the cursor. When you release your mouse button does not trigger any action that was attached to this button

  I'd be happy for someone to report a quick fix that I am missing but I have not found all the messages about the present. This problem makes me see again my principles of interface design when you use Adobe Captivate and active forms in the form of buttons to make sure that the user clicks in the active area of the Smart button shape. We are talking only about 5 pixels, I think, but if you have effects such as glows and shadows on the button and then visually you give the user more opportunity to meet this problem.

  Any whoooo, if someone can tell me, «oh, you just need to click on this option...» "and hey presto no shrink more so GRAND and I apologize for this rambling post

  AndyK

  Hi Rod,

  Yes, it was one of my first thoughts, but I quickly discovered that although the new States are great, they are still very limited in this first version of new feature and you can affect only the background and outline of shape, what got me thinking and found a workaround.  It won't work if you don't have a stroke that is already applied to your shape and you use a fill sold.

  First, I added a line of px 1 to the normal state of the smart shape and it's the same color as my filling. Then I activated the idle state and added a px race 4 of the same color.  "Hey Presto" it worked and the smart shape does not decrease at all.

  You MUST have a stroke, applied to a Normal State to work properly, or any size you do the low width of line of State, it will not increase in size correctly. Strangely, it has increased only very slightly and only about 2 px regardless of what size you defined in your inactive state.

  So that kind of works, but unfortunately I used a random variable of different smart shape using images, gradients and colors buttons different diseases. Close, but no cigar.

• Replay button problem

  Hello

  I have a problem with my BACK button. I created the same tip action that I used withount compared to previous editions. Instead of reading the slide, it just freezes.

  Someone at - he seen this before or have any idea what could be the reason?

  I use XP® Captivate® 5. I will attach a picture of the fast action.

  

  Thanks in advance.

  Kind regards

  Patrik

  I don't understand, I myself used action replay several times and it works.

  There would still be a thing, you can check whether what is happening with this project.

  Create a new project to add Action Replay ahead, test it.

  If this works, copy all the slides in the project for the new project and apply it on all your buttons.

  Thank you

  Anjaneai

• Flash button problem

  Okay, so this is my problem, and I can't understand it.

  I have a story, and the animation stops to allow the user to make a choice, a or b. However, whenever I click on a choice, instead of going to this framework, it starts again.

  For context, I added the stop(); ActionScript to another layer, the button works fine in the timeline panel and goes to the desired location, but not in the preview of the test.

  This is ActionScript 2 and the code for the button is:

  on (Release) {}

  gotoAndPlay (320)

  }

  I don't know if this is a problem with the scenes, because the buttons [using the same script] worked well in scene 1, but now in scene 2, it does not work. I tried to take it: gotoAndPlay ("scene 2", 320) and still no luck.

  Any help would be great!

  In fact, I thought about it, did not work on the test of the scene, she has worked to test the animation, but thank you!

• AS _alpha animated on a button problem

  
  Hello
  
  I use the following code to animate the _alpha of a button up and down value:
  
  _root. FadeIn = function() {}
  NAV.tekst._alpha += 2;
  If (nav.tekst._alpha > = 100) {}
  delete this.onEnterFrame;
  this.onEnterFrame = _root.fadeOut;
  }
  }
  
  _root.fadeout = function() {}
  NAV.tekst._alpha-= 1;
  If (nav.tekst._alpha < = 50) {}
  delete this.onEnterFrame;
  this.onEnterFrame = _root.fadeIn;
  }
  }
  
  this.onEnterFrame = _root.fadeOut;
  
  The button contains only a textfield. It is a static text, so there should not be problems of seal, right? The opacity of the button seems to 'jump' somewhere between the values of 75 and 80. Almost as if it increases (or decreases) with 10 instead of 1 for a framework and continues normally. Track the _alpha value revealed no such behavior.
  
  Any ideas on what it could be, or how to possibly work arround it?
  I would rather not to animate the text in the button, or something, because the button must Flash only under certain conditions.
  Thanks in advance!
  
  Yours,
  Andra

  Quote:
  Posted by: kglad
  It's a question of anti-aliasing. When you change an _alpha of 78 to 79 there is a change in anti-aliasing which is much more dramatic than the change of _alpha.

  to address to use anything other than anti-alias for readability.

  That's all! kglad, thank you for your advice!

  I just wanted to add that any form of custom anti-alias doesn't seem to work either. Even with the two values set to zero.
  Do not use "anti-alias for readability" thins to the police a bit, but I use a version of the police's "BOLD" instead and it looks pretty good.

  Thanks again!

  Yours,
  Andra

• Stange button problems when exporting from Fireworks

  First of all thanks for the help of others on button issues I've had.
  
  I created a button with popup menu of fireworks, I saw the button and preview in fireworks gives an overview of the pop-up menu in the excatly the correct position, however when I insert the Fireworks HTML code in a Table in Dreamweaver and previsualisez in IE the table jumps to the top of the button, I tried to move the start position in Fireworks then export again, but the problem is still there. Under the button in the table after insert Dreamweaver adds what looks like a Golden Shield opportunity / anchor with my pop-up Description of the menu, I guess it's the pop-up of the menu Description, this is what causes the problem. ?.
  
  I enclose the HTML for the experts that I know are hiding on this forum.
  
  Becomes very frustarted now. !. I'm so close to make the Pop up menu bar done and people here said it does not work, once this fix is over I'm ready.
  
  Hope someone can help me.
  
  SPECTRA

  First of all thanks for the help of others on button issues I've had.

  I created a button with popup menu of fireworks, I saw the button and preview in fireworks gives an overview of the pop-up menu in the excatly the correct position, however when I insert the Fireworks HTML code in a Table in Dreamweaver and previsualisez in IE the table jumps to the top of the button, I tried to move the start position in Fireworks then export again, but the problem is still there. Under the button in the table after insert Dreamweaver adds what looks like a Golden Shield opportunity / anchor with my pop-up Description of the menu, I guess it's the pop-up of the menu Description, this is what causes the problem. ?.

  I enclose the HTML for the experts that I know are hiding on this forum.

  Becomes very frustarted now. !. I'm so close to make the Pop up menu bar done and people here said it does not work, once this fix is over I'm ready.

  Hope someone can help me.

  SPECTRA

• OI Vei!  Button problem

  good people of Hello. I did a site (Flash 5) and there is an obvious problem when you click the buttons in the following example. For some reason any they "flicker" when moving from one scene to the next. Here's what I did:
  
  I created the primary/intro scene with the stuff good, then copied the last image of each item (about 14 points) and placed in the order in every scene (7 of them), separate keyframe in every scene. Basically, I'm going to become the main parts of the intro the same in every scene (instead of a film to get the installation type), so they appear as not moving. Anyway, when I'm in a scene and go on another scene click on my button where I'm just seems to sparkle, as he is running (is there nothing to run). The buttons are simple... 1 frame SR's picture. one size, 2nd frame is same slightly larger sized photo. and with the text.
  Here's the example example
  
  No information as to what I have wrong or help would be appreciated
  
  Thank you
  
  

  Don't know how to fix it, but it is the result of the evolution of the scenes. The button acts like it is off for a moment, and then it changes and more State. You can see that this is what's happening by clicking on a button, then move the mouse out of it very quickly. Glitter - or the size jump from normal to most happens when you do this.

  In the decompiled version I watched this occurs because of scenes separated by empty keyframes. If I remove these unnecessary keyframes button flicker disappears.

  So, maybe you should try combining the scenes into one. It's a pain, but I don't have any better ideas.

• "Home" button problem?

  GGuys that I just bought a new phone I 6, but whenever I touch slightly the home button that feels by clicking a little bit... the fingerprint sensor works well fine.is it something I should worry about?

  Hello Simoskav,

  Thanks for this info and choosing the communities Support from Apple. I know how important ensuring your new iPhone work properly is for you! Based on what you said, it seems you have a problem of physics with the home on the iPhone button, but you can try the steps outlined in this article before install you any type of service:

  Get help with buttons and switches on your iPhone, iPad or iPod touch

  See you soon!