Last channel - Jump button

Similar Questions

• Captivate 9.0.1.320 jump button problem

  Hello

  I've done a lot of research and cannot find a solution to this problem rather embarrassing. I did a responsive project in captivate and some of my multi-state buttons jumping around when I try to hover over them to click in the preview.

  I know there are other posts on this problem for Captivate 9.0.0.223 jump button (an earlier version of Captivate that I use) and that there is a fix for this version but I only use the next version (Captivate 9.0.1.320) where this patch has already been incorporated and there is always the problem of button jump.

  Any help would be greatly appreciated on this issue!

  Best,

  -Dani

  That's what I've seen, he is still attached in pixels and upward.

  I tried a similar workflow here, and smart positioning towards the bar remained in the bearing and down the State for me, even when the value in pixels. Have no idea what caused this difference for you, but it is the cause of the "jump".

  Hmmm, I would be this button Delete and recreate, but write the steps you did. This is the first time I've heard on this issue, maybe that this will not happen again?

• I disabled the next / jump button in quizzes and do not remember how I did it.

  I disabled the next / jump button quiz and do not remember how I did it. I need to reactivate the it. Oh yes 7 Captivate.

  This will be the problem. You can try an option? There are other means to force the user to answer each question.

• The jump button does not work on iPhone

  Skip to the next song button does not work on iPhone. When you press the jump key, instead of going to the next track or shuffle to the next song, he repeats / restarts the track that is currently playing. Even when the song ends, it starts all over. It's like all my songs are stuck on repeat. The only way to change a song is by manually choosing a different, or by manually typing the shuffle button. Everything worked great yesterday. I asked several of my friends to check my conclusions, and they have confirmed the same questions. If anyone knows how to fix this help please.

  Hello Gus87,

  I understand that your iPhone seems to be stuck playing the same song, regardless of your attempts to move to the next track. This may be due to the function "Repeat" enabled in the current reading on your iPhone screen.

  

  • Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

  Repeat steps. Press on to repeat an album or a playlist. Double click to repeat one piece.

  iPhone user Guide - play music

  http://help.Apple.com/iPhone/9/

  See you soon!

• I work in forms in Adobe Acrobat Pro - My Add a text field and add the jump buttons checkbox in the page and do not place I wish it. How should I do?

  I'm working on a scanned page that I insert form fields. I used this exact page before with no problems, but now when I go to add a text field in the box, it jumps all over the page and not have a place where I want to. How can I solve this problem. I tried to open a blank version of the page and they all do the same thing.

  Go to view show/hide - leaders & Guides and uncheck the snap to grid

  option.

  Wednesday, June 11, 2014, at 8:42, surfer hawaii [email protected]>

• Resize a movie FLA & jump button (help)

  Hello

  I want to resize an animation Flash (full movie) which had a dimension 448 * 280 pixels size.
  and need to play automatically instead of click the button START INTRO

  someone help me please on this issue,.
  Thank you
  concerning
  zains

  The extent of resizing goes.  If you want to resize the source file then you need to go change the dimensions of the document and then change everything piece by piece to fit into the new dimensions.  The alternative is to simply change the dimensions specified in the html page that includes the file.  This may affect the quality of any bitmap image in the file.

  As regards to the beginning question goes, it is that there is a stop(); command at the beginning of the timeline that you need to remove so that the file is not stopped at the beginning of the year.

• On "Back to the last visited slide" feature

  Hello world

  I have a question about the return to last visited slide function, and how do I customize the system cpInfoLastVisitedSlid variable, to restrict some access to the project.

  Because I don't know anyway to keep my word clear and concise, I'll try to explain my question more...

  Version I use: Captivate 5

  Currently, I am working on a project that includes the course content and a navigation set guide.

  Drag each content of course has 3 buttons:

  1. Return to the previous slide
  2. Go to the next slide
  3. Navigation Guide (go to navigation guide menu page)

  The Navigation Guide is a small session 30-slide tell our audience how to navigate and print the pdf version. Here is how we structure the Guide:

  1. menu Page, on the menu page, there are 4 button
     1. button to return to the last slide
     2. button section has
     3. button in section B
     4. button for section C
  2. A section in the guide
  3. Section B of the guide
  4. Section C of the guide

  On each article, there are buttons that can go to their sub-sections and return to the menu...

  the user accesses any slide of course content for the navigation guide. The slide of frist that they will see after entering the navigation guide is the page of menu with 4 buttons. If the user click on the "go back to the last visited slide" button, the button will be going out there where the user was in the slide of course content.

  However, if the user click on the other buttons to view the content in the guide. When they return to the menu, the last visited slide become the last page, they see in the guide... so they cannot exit the guide and return to the course except we assign a button to access a particular slide in the course content...

  Here's the question:

  Is there a way to package the system variable, cpInfoLastVisitedSlid, don't forget to slip that in navigation guide, he visited, and only remember the slides of the course session?

  Thank you for your patience to finish reading my long question...

  and thanks to Lilybiri and RodWard answered my question on How to create user variables to follow the slides in question?

  for the reason that I can not connect to my previous account... but I really want to say, you guys give me a great help.

  The cpInfoLastVisitedSlide system variable is read-only and you cannot change its value by using advanced actions.

  However, you may not be able to achieve what you want by creating your own variable and using the value of the variable system with last few advanced actions.

  First of all, you need to work on all the scenarios where your username do NOT want to jump to the last slide literal has visited, but to another slide. From your description, it seems that these scenarios would be linked to the fact that your username entered the Group of slides explaining navigation. Fix?

• How do you GET the button?

  Hello

  I created a Web site, I want to jump button requirement mentioned below

  • The intro should have a 'skip' button to move to the home / index page.
  • At the end of the intro animation, it should directly lead to the home / index (automatically) page

  Please help me... I'm waiting for your valuable comments

  Concerning

  Maury

  Yes, it is very difficult to understand.  I have the idea that what you were asking works fine now for the jump key, so we respond to your ad.  If you want also that it be automatically go to aboutus page when the animation ends, then in the last frame of the animation, you just need to include...

  getURL ("aboutus.html", "_self");

• AV buttons do not work on my Satellite A100 more

  Hello
  I bought a satellite A100 PSAA9E.
  last week the buttons that control a video or audio medium (play/pause, stop, back/front) and work for open internet explore and windows media player. But yesterday, the play/pause, stop, back buttons stopped work.i have already reinstalled the toshiba drive and windows media player without success.

  I don't know what to do, help me please.

  Hello

  You have reinstalled Toshiba command? Possibly you mean Toshiba controls? Am I wrong?
  On my laptop satellite Toshiba control are responsible of the properly the function of the buttons above the keyboard.

  I think that you should check in the Panel of control if Toshiba controls has been installed correctly and check if the applications were assigned to single keys.

  A similar problem occurred there several times on my unit and the reinstallation of the orders of Toshiba and TOSHIBA common Modules, everything was ok.
  I recommend doing it on your laptop.

• Satellite A200 - 23 X: how to change the app assigned to buttons on the touchpad

  Dear friends,
  I have the Toshiba A200 23 X with Vista.
  I installed the Synaptics pointing for the touchpad device. I assigned in the 3 buttons, 3 different possibilities for that when I touch each of these buttons to start the appropriate application.

  The question is how to change the applications that I assigned?

  The first time, before fix, when I touch for example, the first button, a small window appears asking to attach a request, the same happened with the rest buttons 2.
  But now I want to change these apps that I have attached to these buttons, I know no way th.

  If anyone can help please.

  Thank you very much

  Hello

  I think you can change the settings of touchpad button in the properties of the touchpad.
  You can find properties of * Panel-> mouse-> device (last tab)-> settings button settings *.

  There are a few options. You must choose the option called Dual mode
  You will find the area where new applications could be affected.

  Concerning

• Media buttons do not work in Satellite P300-21st using Win 7

  Hello

  After the turning off my laptop, last week, the buttons of media suddenly stopped working.
  The strange thing is that they are flashing all the time, even when the laptop is turned off.

  I downloaded the toshiba Web site VAP (although the version was a 2009 one, if there is a new one for my laptop please let me know. Maybe I can use a VAP, a similar model.
  My system is Windows 7

  the other weird thing is that I have disabled the option of the illumination of the F2 Setup but the media buttons are still on.

  I also tried taking the battery, etc., but nothing

  any ideas?

  Hello

  The VAP is a Toshiba Software and as far as I know, you can use the other version of VAP, which was released for other series of laptop.
  For example, you can use the VAP released for Satellite P500, P750 series or higher.

  But I m wondering why the s button led is always ON even though the lighting is disabled in the BIOS.

  > I also tried taking the battery, etc., but nothing
  It is also my idea unplug the power adapter, remove the battery, hold down power button / stop along 30 sec.
  Then connect the AC adapter and check the functionality of the multimedia buttons.

• Satellite M100-164 button special support under Vista

  Hello

  I am a happy Satellite M100-164 (M100 (PSMA0) owner and I recently changed the old Windows XP mode with windows Vista (32 bit). Almost everything works perfect... except 6 multimedia keys ;) I downloaded the [last drivers "Support Button" | http://se.computers.toshiba-europe.com/innovation/download_driver_details.jsp?LNG=26&service=SE&selC fulltext = 2 & selFamily = 2 & selSeries = 161 & selProduct = 633 & selShortMod = 461 & language = 13 & selOS = 26 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & count ry = all & selectedLanguage = 13 & type = all & page = 1 & ID = 5636 6 & DISO = 26 & driverLanguage = 42] but I am obviously missing something because I can't make the buttons work :)

  The only description for divers is:

  Allows you to customize and TOSHIBA special button preset settings.

  And it's inside the packaging - http://img147.imageshack.us/my.php?image=01wk9.jpg

  When I run the exe, I get this - http://img80.imageshack.us/my.php?image=02ve5.jpg

  but when I restart, there is no change in the situation ;)
  My best guess is that I need to put the files somewhere, but currently my crystal ball does not work :)

  Any ideas? Anyone?

  Maybe the drivers and in particular tools and utilities installed in the order of poor facilities. I have installed Vista on old WXP preinstalled A100 using this command of facilities:

  Windows Vista
  TOSHIBA Value Added Package
  Chipset driver (if not available installation driver display only)
  Display driver
  Flash Media Driver
  Luxpad & Driver TouchPad Synaptics
  Realtek Audio Driver
  TOSHIBA software modem
  LAN driver
  Wireless LAN Driver
  Bluetooth stack
  Bluetooth monitor
  Fingerprint software
  TOSHIBA hardware setup
  TOSHIBA supervisor password
  TOSHIBA SD utilities
  TOSHIBA Assist
  TOSHIBA ConfigFree
  Support Button

  And so on.

  Try please install Vista to new und follow this order of installations.

• How to get the physical channel for USB card as ENET

  Hello

  For my application (VB .NET, using NIDAQmx 8.8), I need to access the 2 cards:

  a USB-6008 and an ENET9163.

  I would like to read the physical channels automatically with this feature NI-DAQmx

  Physicalchannel1ComboBox.items.AddRange (DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External))

  Unfortunately, he didn't get a single card at once.

  When the USB card is connected, he read the physical channels of the USB card

  When the USB adapter is not plugged in, it read the physical channels of the ENET card.

  I hope someone can help me with this problem!

  Thank you

  RB

  Hello RB.

  To read from multiple channels, you can enter in the drop-down list box "Physical channel", the comma separated channels, custom channels or if you read physics, the string "DevX/Benjamin: Z", where X is the number of device, and X and are the first and the last channel you want to analyze (for example to read to ai0 to ai4 from your device 1 enter "Dev1 / ai0:4"). Among the names of your channels, I guess they are global channels created in MAX? You can always read channels multiple and different advice by separating the comma.

  I hope this helps!

  Kind regards

• Green and blue channels picture recording only

  Hello

  I work on a photo in RGB mode, where, after turning off the red channel jumped and looked amazing! I would like to save and print it later however remove the red channel reverses the image automatically in CMYK and changes the color of the picture settings. Just save the picture after you cut the red channel did not help either. Is it possible to fix this?

  Enter in the channel Panel, select the red channel and fill it with black. To do this in the main menu, you can choose Edition/fill and choose black in the drop-down menu content. Filling of the Red layer with red in RGB mode you have red in your image.

  

• Ignored despite the order buttons

  After you resolve my 18 buttons on a page number by dividing my chapter in two pages menu, now again jump buttons 5 and 7 (downhill), 6 and 4 (on the way to the top). I found other threads that spoke of the order still bed buttons in Photoshop (up and down) so I changed my order there.

  

  Then I made sure my buttons were assigned correctly.

  

  Then I read about autorouting possibly messing things even. Then I disabled these settings.

  

  It is still made. What is going on?

  

  Click the Routing button button in the menu Viewer. Can change them as needed.