Captivate 9 drag / move

Similar Questions

• Captivate 8 Drag and Drop several legends of text for your comments

  Hello

  I am creating an interaction with an element with which the learner can drag for four different images representing the different categories of data classification.  The idea of the interaction is for the learner to discover each of the four different categories, by trial and error.    I want them to provide comments through text captions that the answer is right or wrong, but each piece of comments will be different and the user should be able to drag the item several times until they found the right answer.  I can't fwork how to do this.

  I just upgraded to Captivate 8 week last, after having previously used Captivate 5.   Therefore, I've never used the installation drag - d├⌐poser and I don't know if he's going to do what I'm trying to achieve or if it's something I could achieve with shares advanced instead, or if it is not possible to do. I tried searching for similar topics, but either did not understand the answer or scenarios seemed different.  I don't really know where everything is still 8 Captivate, and while I have used certain actions in Captivate 5 tip, I'm not that comfortable with them, so simple is good.  The interaction doesn't have to be reported on.

  Is anyone able to help me please?

  Thanks in advance for your help.

  Hello

  According to my understanding, you have a source element that can drag and drop on 4 different targets (different images). For every drop of a sort of legend should appear on stage the feedback to the corresponding user from the target source. (Correct me if I'm wrong)

  This can be achieved with Drag and drop interaction.

  1. Insert the source 4times and overlap each other (since you can drag and drop 1 number 4 times, you must have this element to work as a source of slippage 4 up to 4 items).

  2. make the 4 elements as drag source and group them into a single type. (With the help of add option)

  3. you have your 4 images on stage and Mark as targets of drag.

  4. Insert the rear power legends and put them near their targets. Disable their 'Visible output' flag on Bill pro forma.

  5. now match the Correct ANS on stage.i.e of one of the source type to a target correct years.

  6. Select each target and open their box "Actions of the object". (from Panel drag / move)

  7. uncheck the ' accept all the ' option and the value of count 1. Add the action of 'travel' to show their legends of Feedback now under Drag source Type. (which were hidden). This should be through "Advanced Actions.

  8. now after for each target open the dialog box 'Good years' drag and drop the Panel. (it will be under options and so visible from the source or target is selected)

  9. here under the table, you can see that the value of count is 4. This is to reduce the value to 1. (double-click to change)

  Interaction is now ready. Please don't answer if that's what you wanted to achieve and if you do all the steps above.

  Derrick

• Captivate 8 drag and drop interaction does not

  Hi, I work with 8 Captivate and created an interaction drag-and - drop using the wizard to drag / move. For some reason when I preview the interaction some of my sources of drag and others are not. I searched high and low for what I can hurt, but I can not understand. I created types when doing the interaction so it is not sensible that some should work and others don't. Thanks for any help you can provide.

  Hi Vaneppmc1,

  You have disabled the option accept all of the dialog "drag accepted Source. (as seen from your capture screen images).

  If the option "accept all the" is checked, the target can accept 'ALL' sources who are ticked in the column 'Drag Source Types '. In your case, Image 9 can accept sources of type "Bad conscience".

  Since you have unchecked the option accept everything, and the value of Count is 1 (which is default). Here so the target can accept only 1 source of type "Healthy Conscience of the United Nations" and lift reject legend of error on the acceptance of another source.

  Check the option "accept all the ' try and let me know if this works for you.

  If this does not solve your problem please share your Cptx file to address the issue by e-mail ([email protected]).

  Thank you

  Derrick

• Drag / move - how to reset the feedback?

  Hello

  I have a drag and drop into a slide (Captivate 7).

  Problem: I need your feedback an interaction drag-and - drop is reset whenever the learner back to the slide / move later.

  Background: Learners complete the drag / move and gets feedback "Correct!" or "Incorrect". The learner then continues the lesson on the way to the next slide. The problem is that, if the learner is returned for drag / move, 'Okay!' or 'Wrong' feedback still shows that the drag source items are reset to their original locations and the learner can repeat the interaction drag-and - drop. By clicking on the button "Reset" does not remove the existing 'Correct '! or feedback "incorrect." Even if the learner restores the interaction and the opposite effect (for example if the learner is wrong the first time, but then correct themselves the second time), the existing comments don't change e.g. 'Wrong' to 'correct '.

  Any ideas on how to solve this problem?

  Thank you!

  It worked!

  I had to also run the tip at the entrance Action, not just at the exit. Weird, but hey, it worked!

  see you soon

• Drag / move does not work

  Windows Explorer - updated my computer with the latest updates of Windows XP on February 26 - since then the function drag / move on Windows Explorer (and my office) didn't work. I did a scan full antivirus and came out the own. Also checked the properties of the task bar and Start Menu and confirm the Drag and Drop check box is checked. No new hardware recently added with the exception of an APC battery backup. Suggestions for remedies?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• Cannot drag move & on win7 x 64 programs

  Hello, I need help on why I can't do drag & drop of images/files on programs such as Photoshop CS5 / CS6 or images/files to other programs & browsers.
  I CAN do drag & drop under windows and folders, etc, but not in the programs. I read almost all the solutions found here and on Google without success. I went from keyboards and mouse still nothing, checked the settings in the menu start-star & options in IE8, cleaned the registry with ccleaner, I tried the keys ESC and combo but again without success.

  It is a new installation of Windows 7 ultimate with the latest drivers from the website or x 64. I have a Windows 7 x 86 as well (same setup with the x 64) and I can do all the drag & drop on it.
  This bothers me because I do a lot of hanging around in photoshop and other editing software.

  Thank you very much in advance.

  Hello

  1. what happens when you try and drag - move?
  2. This involved for other users on the computer?

  Method 1:

  I also suggest a clean boot to see if a third-party program has been installed and that it interferes with the operating system.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 2:
  In Photoshop CS5 a new image opens as a new layer, and not as a new document. For example, you can create a document in Photoshop, first, and then see if drag - déposer works.

  Method 3:
  Try to create a new user account to see if the same behavior occurs.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Can't see the dimensions for drag - move to create dataforms: Oracle EPMA planning

  I m trying to create a "simple dataform" but cant seem to find the dimensions for drag - move so I can create it. I can see dimensions in the Pan "POV", but nothing in the pots line and column as you can see in the screenshot.

  

  I missed something?

  would appreciate any suggestions,

  I got it. We are supposed to drag and drop dimensions using the icon

• Adobe captivate 8: drag - off d├⌐poser. Sort to allow

  Adobe captivate 8: drag - off déposer. Sort to allow

  I have attached the picture for a better understanding

  

  Drag & drop by drop was not possible for projects that in the first version of

  8. can you verify the exact version number? If 8.0.0.145 you

  upgrade to 8.0.1.242. I am not sure of their exact number, no CP on

  my phone.

• Drag / move in libraries and nothing appears in the library

  I opened a document in illustrator and drag and item in the library and nothing appears in my library panel?

  Hi Ausmack,

  This is a problem known to the Illustrator team with a certain configuration of operating system (studied at the moment) the behaviour of drag - move in the design in artificial intelligence Library Panel does not work.

  Until then, you can try adding the asset using the buttons/icons that appear at the bottom of the Panel "libraries."

  Thank you best regards &,.

  Rambour

• DND (drag / move) and listeners

  I want to drag a JComponent with all its properties and the Auditors.
  How can drag you listeners registered to a component when you perform a drag-and drop?
  
  I have an extension of a JTextArea. I got drag and drop it into another container.
  After release, some of the listeners don't work anymore.
  I can cope with headphones I've added manually, but not initialized or added somewhere else during initialization of the component.
  
  For example, I have the following 3 headphones on JTextAre:
  dot = 0, class = 0 javax.swing.text.JTextComponent brand $MutableCaretEvent
  javax.swing.plaf.basic.BasicTextUI$DragListener@25cbfa42 class javax.swing.plaf.basic.BasicTextUI$ DragListener
  Dot = (0, Forward) Mark class javax.swing.plaf.basic.BasicTextUI (0, forward) = $BasicCaret
  
  After release, the new component has 4 listeners, the MutableCaretEvent is double and one of the two no longer receive events.
  dot = 0, class = 0 javax.swing.text.JTextComponent brand $MutableCaretEvent
  
  If I drag and drop the JTextArea autour, for every drop of the number of listeners of MutableCaretEvent increases. If I drag the JComponent about 10 times for example,
  I'll have 11 MutableCaretEvent listeners.
  
  So my questions are:
  1 - How can I remove the MutableCaretEvent that no longer work?
  2 - should that other listeners I care? How 'Add' those who eventually doesn't work anymore after the decline?
  3-is there a way to move a JComponent from one container to another without going through the process of serialization (drag / move)?
  
  Thank you
  
  Published by: 849866 on April 5, 2011 03:34
  
  Published by: 849866 on April 5, 2011 03:35

  What is even work considered less listeners? It seems that you remove the component in exportDone of the target component. Also, you must call revalidate(); Repaint(); on the container if dynamically add you items.

  I don't know if the serialization uses the default constructors. If he does it would add additional listeners. You might want to just export the reference to the component (mimetype localObjectRef or something like).

  Please do a NBS (simple chassis, two panels and a text box to slide between them).

• Drag / move image is duplicated

  Hello

  In my code, I want to drag an image in a list populated from a folder, and its information are filled with an xml file. Now, I can drag the image in the list and drop it into the container, however, when now, I want to drag around the deleted image, it is duplicated, an extra image is created in the Web. So, if someone can tell me how not to create an additional copy of the image in the new container (canvas) that he was dragged in.

  Here is the code:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="vertical" "

  name = "Drag and Drop tutorial"

  creationComplete = "init ()" "

  initialize = "pictureService.send ()" >

  < mx:Script >

  <![ CDATA [ ]

  import mx.controls.Image;

  import mx.core.DragSource;

  import mx.core.IUIComponent;

  import mx.managers.DragManager;

  import mx.events.DragEvent;

  import mx.controls.Alert;

    

  import mx.rpc.events.FaultEvent;

  import mx.rpc.events.ResultEvent;

  import mx.collections.ArrayCollection;

  [Bindable] private var pictureData:ArrayCollection;

  private void resultHandler(event:ResultEvent):void {}

  pictureData = event.result.data.image;

  }

  private void faultHandler(event:FaultEvent):void {}

              //code

  }

  public void init (): void

           {

  / / a mouseDown event will begin the drag

          

  list.dataProvider = pictureData;

       

  //picture in the list is moved

  this.picture.addEventListener (MouseEvent.MOUSE_DOWN, beginDrag);

  / / accept drag - move...

  this.area.addEventListener (DragEvent.DRAG_ENTER, acceptDrop);

  / / treatment of gout...

  this.area.addEventListener (DragEvent.DRAG_DROP, handleDrop);

           }

          

  function public beginDrag (mouseEvent:MouseEvent): Sub

  {

  / / the initiator of the drag is being moved (target of the mouse event)

  var dragInitiator:IUIComponent = mouseEvent.currentTarget as IUIComponent;

       

  / / the drag source contains data which is moved

  var dragSource:DragSource = new DragSource();

       

  / / Add data to the object.

  
  

  dragSource.addData (1, 'value');

               

  / / Create a copy of the piece to use as the drag proxy image.

  var dragProxy:Image = new Image();

  dragProxy.source = mouseEvent.currentTarget.source;

  dragProxy.setActualSize(mouseEvent.currentTarget.width,mouseEvent.currentTarget.height)

       

  / / ask the DragManger to start drag

  DragManager.doDrag (dragInitiator, dragSource, mouseEvent, dragProxy) ; 

  }

  acceptDrop (dragEvent:DragEvent) of the public service: Sub

     {

  var dropTarget:IUIComponent = dragEvent.currentTarget as IUIComponent.   

  / / accept the fall

  DragManager.acceptDragDrop (dropTarget);

  / / post your comments

  DragManager.showFeedback (DragManager.COPY);       

     }

    

  handleDrop (dragEvent:DragEvent) of the public service: Sub

     {

  var dragInitiator:IUIComponent = dragEvent.dragInitiator;

  var dropTarget:IUIComponent = dragEvent.currentTarget as IUIComponent;

       

  If (dragEvent.dragSource.hasFormat("items"))

    {

  var table: items = dragEvent.dragSource.dataForFormat("items") as array;

  var img:Image = new Image();

  img.x = dragEvent.localX;

  img.y = dragEvent.localY;

          img.width = 50;

          img.height = 50;

  img.source = "' assets / ' + points [0] user.user +".jpg"; "

  img.addEventListener(MouseEvent.MOUSE_MOVE,beginDrag);

         

  area.addChild (img);

     }

     else

     {

  dragEvent.dragInitiator.x = dragEvent.localX

  dragEvent.dragInitiator.y = dragEvent.localY

     }

         

     }

    

  ]]>

  < / mx:Script >

  < mx:HTTPService id = "pictureService".

  url = "" data / data.xml " "

  result = "resultHandler (event)" "

  fault = "faultHandler (event)" / >

  < mx:DataGrid id = "list" = "238" height = "200" width = "26" x = "10" labelField = 'src' dragEnabled = "true"

  dataProvider = "{pictureData}" >

  < mx:columns >

   

  < mx:DataGridColumn dataField = "id" id = "code" >

   

  < / mx:DataGridColumn >

  < mx:DataGridColumn id = 'image' draggable = "true" >

  < mx:itemRenderer >

  < mx:Component >

  " < mx:Image source="assets/{data.id}.jpg "/ >

  < / mx:Component >

  < / mx:itemRenderer >

  < / mx:DataGridColumn >

  
  

  < / mx:columns >

  < / mx:DataGrid >

  < mx:Canvas id = "space" x = "266" y = "28" width = "436" height = "401" backgroundColor = "#c0c0c0."

  dragDrop = "handleDrop (event)" > "

  < / mx:Canvas >

  < / mx:Application >

  your handleDrop is called twice. you have assigned this twice - init function and the other online eventlistener.

  remove one and it works.

• Duration of the legend of failure in drag / move (Captivate 8)

  How to set the caption of the failure in drag and drop to stay longer or stay indefinitely? For the moment, he disappears after 3 seconds. I have changed the preferences of text captions to stay for the rest of the slide, but it does not work. I use 8 Captivate.

  Settings for text captions aren't going to help.

  Select the legend of failure, look in the timing Panel, to change his "timing"

  

• It's as soon as possible to simply drag - move the TBird address book collected addresses in a personal address book. Why this easy to use feature was dropped?

  I want to copy the user and the e-mail information to one personal address book to others...

  It still works like that. Preventing you to do this?

  If you drag and drop this moves the contact from one book to the other. To copy you must hold the Ctrl key while doing. A plus sign appears to indicate a copy and not move.

• I want to copy some addresses in the personal address book to a specific address book without the chore of typing each of them. Dragging moves simply address.

  I want to create specific address (for membership to the club) books. Click on the entry in the personal address book does give not an installation "COPY", and do drag from one to the other removes the personal address book. Is it possible, other than having to retype each address in the new book, which will allow the address to appear in the two books? OK - I know I'm lazy!

  Learn how to use the copy/move techniques and selection of basic computer.
  Hold down the CTRL key while clicking on contacts to select more than one at a time.
  Hold down the CTRL everything to drag and drop to copy instead of move. A plus sign to indicate the copy.

• Windows 7 Explorer and drag / move icons to reposition.

  I'm having a problem with the Explorer of Windows 7.
  In Windows XP when in Windows Explorer, I am able to select pictures and miniatures, tiles or the icons and then re - position file icons in the pane of files by left clicking and then dragging the icon to the position I want. I can't find how to do this in Windows 7. I am very visual and I need to be able to move the file icons that I work with them. Alphabetical sorts do not work for me. I think that this feature exists since at least Windows 95, 98, 2000 and XP. I am able to move icons on the desktop to any position, I want to use the drag and drop method, and that's what I want to do in Windows Explorer.
  Any help is welcome. Thank you.
  I tried going through the help of Explorer in Windows 7 and can't find anything to help me. I also researched on the web a vast nothing helps.
  The computer is a brand new Thinkpad SL510 Windows 7 Professional 32 bit.

  StillInTrouble,

  Thank you for visiting the Microsoft answers community. This feature has been changed in Windows 7 by design, however, if this is something you want restored, you can send your suggestion to Windows 7 comments.

  Thanks again.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.