Captivate 8 Drag and Drop several legends of text for your comments

Similar Questions

• Captivate 8 Drag and Drop - selection of Audio files for interaction

  I see where the box is for the selection of audio data to play (Drag and Drop/Options/Interaction properties). I want to select the audio file that will be used, but I don't see where the new place is to select and add the file. I checked the training videos that came out this week, but add the audio was not included. Help appreciated.

  Hello

  Choose an audio file,

  Select the Drop target in the scene. Drag and Drop Panel-> Format-> behavior Snap tab, you can find the Audio menu down.

  Custom Audio file can be selected by clicking Browse next to the drop down.

  Kind regards

  Alexis

• Captivate 7 Drag and Drop

  I created a drag and drop for a Captivate 7 project. I want an image to display when the learner Gets the correct interaction. I want a different image to appear if the learner Gets the incorrect interaction. It doesn't work the way I configured it and display the image correctly even when I finished the Drag and Drop incorrectly.  Suggestions?

  

  And what then is the first timeline?  It is a completely different, where are the Feedback text captions?  And you not answered my questions: why sprawl of these legends on the timeline, staggering of the buttons?

  I don't see why you need a second slide just to show your comments? I gave you a link, have you read this article? I explained how to display a legend for the success, and the legend of failure is already built into the D & P. Still, I suspect that you don't understand its features.

• Drag and drop the legend of failure time

  Hello

  I did a Drag and Drop in captivate 8.

  I want to keep the legend of failure more visible.

  Is it possible to increase the time of the legend of failure?

  Thank you

  Select the legend of failure and change "timing" in synchronization properties panel:

  

• Captivate 8 drag and drop interaction does not

  Hi, I work with 8 Captivate and created an interaction drag-and - drop using the wizard to drag / move. For some reason when I preview the interaction some of my sources of drag and others are not. I searched high and low for what I can hurt, but I can not understand. I created types when doing the interaction so it is not sensible that some should work and others don't. Thanks for any help you can provide.

  Hi Vaneppmc1,

  You have disabled the option accept all of the dialog "drag accepted Source. (as seen from your capture screen images).

  If the option "accept all the" is checked, the target can accept 'ALL' sources who are ticked in the column 'Drag Source Types '. In your case, Image 9 can accept sources of type "Bad conscience".

  Since you have unchecked the option accept everything, and the value of Count is 1 (which is default). Here so the target can accept only 1 source of type "Healthy Conscience of the United Nations" and lift reject legend of error on the acceptance of another source.

  Check the option "accept all the ' try and let me know if this works for you.

  If this does not solve your problem please share your Cptx file to address the issue by e-mail ([email protected]).

  Thank you

  Derrick

• Captivate 8 drag and drop interaction

  Hello

  just have a look at the new captivate 8 and when I try to do a drag - déposer question I go to normal place of window > drag and drop. but the problem is the drag and drop option is grayed out - would it because I have only this class on a copy of the trial?

  Nope.  This is because cannot not have slip and fall in a sensitive to the Cp8 project.

  Try to create a normal inadmissible project and you should find that drag-and - déposer is not disabled.

• Several Drag and Drop, several targets. CS5

  Hello:

  I do a Multiple of Drag and Drop in several objectives educational puzzle for child 6-7 years trying to teach them a little on which plants grow in environments in the country. So I have a map of the Mexico divided into 3 different areas: desert, forest and tropic and 6 different plants (3 different groups: cactus, pine and tropical flowers, 2 of each) scattered across the stage and around the map. The goal is for children to put plants in the box to the right and then click on "check" button, which triggers a validation process. Each video clip of the plant has 2 frames with a stop(); action on all: the graph of the plant extends on both images and the second picture has a red sign error graphic that indicates an error occurred (if this is the case). Then the validation process triggered by the "check" button is supposed to move the playback cursor in each placed wrongly move clip factory for the second image to show what plants are displaced and move the playhead of the main timeline to a picture that contains a "Please try again" text and a button "restart Puzzle." If the answers are good, an animation plays saying it was VERY WELL DONE! .

  I searched the Internet for some tutorials and found a file which is pretty close to what I need. I tried to adapt the code to my puzzle but failed miserably. The file is here if you want to check (scroll to the bottom of the page, it is called Soldier.fla). I'm not sticking the code here because it is VERY long, but I will if necessary. If you want that I download the files somewhere else and link them here, I will. If you need me to send them, I'll be happy.

  Here is the structure and instance names in my file:

  Departure:

  -Intro animation

  Map:

  -3 video clips: target_1, target_2 and target_3.

  -Each movie clip has two executives with a stop(); action on each.

  -Each movie clip has a frame-by-frame with a color change to show when a clip of plant fell on her.

  Plants:

  -6 video clips: drag_1, drag_2, drag_3, drag_4, drag_5 and drag_6.

  -Each movie clip has two executives with a stop(); action on each.

  -Each video clip has an invisible button in its background layer called dragbutton1 to dragbutton6 respectively.

  -In the second frame of each clip, I placed a sign of error to be displayed when the boy dropped the clip in the wrong target.

  Placement:

  -video clips drag_1 and drag_3 must be embedded in the target_1.

  -video clips drag_2 and drag_4 must be embedded in the target_2.

  -video clips drag_5 and drag_6 must be embedded in the target_3.

  Buttons:

  -Puzzle AutoScan: main playhead moves to an image named 'play '. It shows after the Intro animation.

  -Check the button: Validation process. If there is any mistakes sends the playhead to main to a named 'wrong' image (here is the text of "Please try" again). If there is no error, sends the playhead to main to a framework called 'good' where begins the animation "Very well done". It shows when start the puzzle.

  -Restart the Puzzle button: moves the main playback head to frame of 'Play '. It shows when start the puzzle.

  -Start button: just restarts. It shows after "Very well done" animation.

  Phew, it was long!

  Now, I'm not a programmer, I'm a designer. I can do buttons and other small things very simplistic but it's just out of my League. Programmers do things my office like PHP (Wordpress, Joomla), a few JS and things like that, but they don't do any ActionScript. They are trying to help but let drop the ball and I tried to understand this since Friday (I took this as a challenge and he lost). The customer wants in AS2, but if you can help me in AS3, screw the customer!

  If one of you can help me with the code, or point me to the right place, I'll be in debt to you. Forever.

  Thank you very much.

  This is a typo and should be:

  var dragA:Array = [drag_1, drag_2, drag_3, drag_4, drag_5, drag_6];

  for (var i: Number = 0; i<>

  [i] dragA dragA [i] ._x = .startX;

  [i] dragA .startY dragA [i] ._y =

  If (i == 0 |) I == 2) {}

  dragA [i] .target = target_1;

  } else if (i == 1 |) I == 3) {}

  Dropped [i] .target = target_2;

  } else {}

  Dropped [i] .target = target_3;

  }

  {dragA [i] .onPress = function ()}

  this.startDrag ();

  }

  dragA [i] .onRelease = function () {}

  this.stopDrag ();

  checkTarget (this);

  }

  }

  function checkTarget(drag_mc:MovieClip):Void {}

  {if (drag_mc. HitTest (drag_mc. Target))}

  feedback. Text = "done Well! »

  } else {}

  feedback. Text = "Missed";

  drag_mc._x = drag_mc.startX;

  drag_mc._y = drag_mc.startY;

  }

• Captivate 9 Drag and Drop DropIncorrect State does not

  Hello!

  I ve done a Drag and Drop interaction, where I have 4 targets and 4 drag only one correct answer for each of the sources. I've added States for Drop targets:

  DropCorrect State, The target turns Green when pressing submit, and the answer is correct.

  DropIncorrect State, target Drop becomes Red when press submit and answer is incorrect.

  I thought that it would be a good way to show the user which targets Drop are correct and which aims to drop they must change to get the right answer.

  When the answer is correct, Drop targets turns green and I made an action that says "OK, click anywhere to continue."

  BUT when the answer is wrong, nothing happens to the colors of the Drop target. It s just a failed, Try Again message. Nothing more.

  Why isn´t the State DropIncorrect showing when I press the submit button and the answer is incorrect?

  I just checked the file of this article, which was created on an earlier version of 9 and it works well also for the State of DropInCorrect, but I have only 1 attempt! I suspect that your endless attempts are the cause of the DropIncorrect does not. Compare it with actions on a question slide: success action will be performed when the answer is correct, but the other action will be done only at the last attempt is finished and the answer is wrong. Since you have endless attempts, this last attempt event never occurs.

  Sorry for the late reply, wanted to check a second time and has been very busy today.

• Drag and drop in training mode - possible for 8 Captivate?

  Hello world

  I have a simple question:

  My e-learning consists of demonstrations and following training. Now imagine there is a drag and drop features: you drag an object in the software and drop somewhere is possible to simulate this also in training mode (when the user needs Act / needs to drag and drop)?

  I am happy to hear from you!
  Greetings from the Germany,

  Chris

  You will need to create the drag & drop drag yourself, using either the Assistant or the D & D Panel. To be able to do so, you need all the advantages: background, drag sources at least. For the target, you can add shapes. That's why I said you need to capture these assets, which can be made by adding only an additional screen captures during the registration process. In addition you will probably need a graphics editor (photoshop or similar) to create sources of drag on the screenshots. It is NOT possible to do it with simple low to capture work, this will be a blade to be inserted later.

• Drag and drop several times

  Is there a way to make an article, that can be move on stage mulitple times? While making beats in music applications. You select a sample and drag it to the stage. Is this possible?

  Yes.  What you do is create a new instance of the object when you click on the sample and have your code target the instance newly added for drag-and-drop interaction.

• Captivate 7 Drag and Drop issue

  I'm trying to create a drag & drop with a correct target and six items of your choice. Three correct answers and incorrect three. I would like to have three elements fall in, while the three should not. My problem is that I can't Captivate to "reject" the three incorrect when dropped into the target... I'm sure it's something simple, and I'm right on it. Anyone have any ideas?  Thanks in advance!

  You will need to check that if the target is configured to accept only made good drag sources. Select target, click the object in steps (Format tab). By default it is configured to accept all, uncheck the bad drag sources.

  

• Drag and Drop in Captivate 6

  Hello

  I have a Captivate 6 company licensed version. I would like to know how to use interaction drag-and - drop.

  Thanking you.

  Regarding

  Leena

  What version of Captivate 6 do you have? Drag / move activity is included in Captivate 6.1 from. For earlier versions, the best would be to buy Infosemantics widget here:

  http://Infosemantics.com.au/Adobe-Captivate-widgets/drag-and-drop/which-Adobe-drag-and-DRA g-and-decline-widget-comparison

  Anthony

• Cannot drag and Drop active browser web form generator

  I know that it worked at some point. But I can't drag and drop several items at a time. Just one at a time.

  I got the active generator: v 17.03.2015

  I'm using firefox ESR: 38.3.0

  I also tried Safari: 9.0.1 (9537.86.2.7.2)

  We support multiple drag and drop now. It is coming in our next release.

  Neil

• Drag and drop files to the icon of the EXE

  I was wondering if there is a way for the user to drag and drop files on the .exe icon and it would launch the program to do something with these files automatically?

  For example: Some PDF convertor programs allow you to drag and drop documents, images, etc. directly on your desktop PDF Converter icon and it will automatically convert to PDF format, without the user even having to open the program.

  This same kind of functionality is possible with a file EXE of Labview?

  If you look at the Arguments of the command line of the Application class property, the first element must match the name of the EXE, the following elements will be the path or paths that were dropped on the icon of the EXE.

• When we organize our emails/landing pages into folders, is there the capacity drag-and - drop?

  Sometimes it does not work always when I record my work and I want to keep my tidy Eloqua platform! I have

  Hi Nathalie,.

  You can drag and drop in the selector (so for example, under the E-mail section, click on "Open an existing email" and opens the selector). If you are looking for in the selector, you will not be able to drag and drop the results of research, but if you want and instead simply navigate through the selector by clicking, you can drag and drop assets into a folder.

  If you want to drag to 'up' in the hierarchy of folders, you can drag the item to the track "Breadcrumb" above the list of files (so if you are in a folder called work in progress, the "breadcrumb" will look like Test-> file Some-> other folder-> current folder), like this: