Captivate captures is not my simulation

Similar Questions

• Capture does not work

  I just got my new growth.  I'm very excited to this topic but already running into problems.

  He did all the Windows updates and I tried to install the update of the workplace grows, but he says that the carpet is not connected. Well, it is. Everything else works. Including the piano. The capture does not work.  I tried several times, recalibrated reestarted al such things.  All I get is a long delay, then a message with an error code: #A00904CD.

  What can I do?

  OK, today received the recovery media. 24 hours, it was fast!

  Do you have a reset and everything works now! (at least I could test this evening)  Apparently, I had all the wrong software in my germ.

  Thanks a lot for all the input.

  NORTH CAROLINA

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• Adobe Captivate help | Slide notes

  This question has been posted in response to the following article: http://helpx.Adobe.com/Captivate/using/slide-notes.html

  Hello

  What is Windows 7 (64-bit or 32-bit) or is this Windows XP?

  If it's Windows 7, then you can right click on the downloaded zipfile (Captivate_6_Neo_Content_LS12.zip or Captivate_6_x64_Neo_Content_LS12.zip) and click on extract all or extract here. You can extract the content in the same folder where is saved the .zip file.

  After that it will extract that zip file, there will be a file named AdobePatchinstaller.exe, double click on it to start the installation. Captivate must be closed in editing Neo Speech voice.

  Thank you.

• Captivate 6 do not pick up NeoSpeech voices

  I followed the instructions to download Neospeech voices and performed the installation and it reported success but Captivate shows that Microsoft Anna.

  I can see voice Bridget, Chloé, Julie, Kate and Paul are in the folder C:\Program Files (x 86) \Adobe\Adobe \VT Captivate 6 (32 bit) so how do you Captivate to connect?

  Thank you

  Hi Vikram,

  Thanks for this and yes that worked.

  Thank you

  Jim

  Date: Kills, 20 Sep 2012 08:10:28-0600

  From: [email protected]

  To: [email protected]

  Subject: Captivate 6 do not pick up NeoSpeech voices

  Re: Captivate 6 do not pick up NeoSpeech voices

  created by VikramGaur in Adobe Captivate - discover complete discussion

  Hello, welcome to the Adobe Forums. According to you, notes, it seems that you have Windows 7 If you have settings specfiic or the Configuration for your project, follow these steps: 1) Close Adobe Captivate 62) go to this location: C:\Users\user_name\AppData\Local\Adobe3) rename the folder "Captivate 6.0" to "1234" 4) launch Adobe Captivate 6 and check you see all the voices under management of speech. Thanks, Vikram

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the http://forums.adobe.com/message/4713452#4713452

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/4713452#4713452

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/4713452#4713452. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in Adobe Captivate, by e-mail, or at the Adobe Community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

• Captivate 5.5 not followed the completion in LMS

  I have a short questionnaire created in Captivate 5.5 to monitor the realization of the plateau / LMS 5.8 success factors.  I use the method of return AICC.  SCORM is not an option.  No matter what options I choose, the LMS will not be complete.  It seems that the captivate quiz is not initializing the LMS.  Remains on the message 'Loading' longer than usual, he plays later.

  Here are the parameters:

  

  I have searched all over the web a solution fails.  I tried the patch for Captivate 5.0 and they don't work.

  Can anyone help?

  Thank you!

  Yay... I found my own answer.

  I don't know why Adobe is so hard to find!

  Here is the link for anyone else who looks for the answer.  Make sure you download the .dll file that corresponds to your version of Captivate (i.e. 5.0 works only for 5.0 and 5.5 works only for 5.5)

  http://helpx.Adobe.com/Captivate/KB/projects-published-Captivate-5-LMS.html

• Captivate demo does not appear

  I use TC 3.5, have a machine with 8 GB RAM, large hard drive, fast processor.  I am using Captivate to record in demonstration mode at 1024 x 768.  I went out to the swf format.

  I followed the instructions of RoboHelp to the letter but still get this problem: the Captivate demo appears not in my CHM, except when you click on the view button result after compilation. He also appears in the overview of the topic ("Item selected View").

  It does not appear when you double-click the CHM file in a folder.  What watch is a sketch where the demo should be, with a red X in a box in the upper left corner.

  He will appear in WebHelp.  The code in the CHM seems OK for me:

  < body >

  < p > < object id = "Object1" data = "captivate_demo.swf" type = "application/x-shockwave-flash" "

  style = "" border: none; "width = '1445' height = '950' >"

  < param name = "movie" value = "captivate_demo.swf" >

  < param name = "quality" value = "high" >

  < / object > < / p >

  < / body >

  I have the last update (from 10 minutes ago) running Flash.

  Ideas?

  Jack DeLand says:

  No work around at all?

  You mean in addition to claiming that people only use the CHM on 32-bit systems or offering instructions on how to launch the 32-bit help viewer?

  I don't think you can use the shortcut command to open an instance of Internet Explorer with the Captivate page. But should ensure the Captivate SWF and associated files (HTML, JS) have delivered and installed in the same folder as the CHM file. And depending on how your CHM has been launched, you might need the path to the script file because of the bug of Multipathing CHM see you when a CHM is initiated by an application.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Button flash work in Captivate 1 but not Captivate 2

  Hello
  
  Assume the following:
  I am creating a Flash button that will slide ahead 1 Captivate.
  Do not ask why I do not use a click box, let's say I'm stubborn.
  
  OK, so in flash. I have an image. I have a white box 20 x 20. That image, I have a single line of Actionscript code, and it looks like this:
  
  This._root.rdcmndNextSlide = 1;
  
  So now I publish it as 'next.swf', using Flash Player 8.
  
  I then insert this file into my Captivate 2 file. I put this file on slide 2.
  
  Now, when I find the presentation, and it allows you to drag 2, it should "auto-advance" to slide 3 run of the animation on the right?
  Well, it's what he does in Captivate 1, but it won't in Captivate 2. I know there must be something that I'm on, I don't know it's right in front of my face. If any of you Captivate gurus could tell me what it is I am doing wrong, it would be greatly appreciated.
  
  Thank you
  
  Doug

  Doug,
  use
  This._parent._parent._parent.rdcmndNextSlide = 1;
  Instead

• Captivate preloader 7 not working - with screen capture for clarity

  Hello community,

  so, I work in the trial version of Captivate 7, because the preloader for 6 Captivate does not work for me. We have a project of ~ 48MB with mp3 on almost all of the slides, videos, flash animations, flash, quizzes and lots of JPEG files.

  Before that we publish the project ensure we click on everything that is necessary, but because it doesn't always I took screenshots of all parameters. Maybe I'm missing something, I'd appreciate your help.

  

  

  Thanks a lot guys!

  NAT

  I assume here that your preloader animation appears at least when you load the file so that you KNOW it works.

  Try to set your preloader gradually higher until you find the percentage during which loading times are beginning to RISE again.  If you have a lot of videos in your project, setting the preloader to a value very low as 10% is not necessarily affect the load times that much because Captivate needs to load a total of assets number until he could start playing anyway.  It is possible that you have a huge video great event right soon after the start of the project and this is what is causing the delay.

  If your question is always with the preload does not appear NOT at all, the only parameters that affect it are those on preferences > project > start and end > path Preloader and percentage.  The path that seems to be fine, but if the preloader animations are not visible at all, try to change a different preloader.  Maybe SOME of them work.  The preloader Default.swf is generally reliable.

• Adobe Captivate 9 problem of software Simulation with high density in Windows 10 display

  Running: Adobe Captivate 9 x 64

  In: Windows 10

  I only have a connection (me) which I assume is the same as the administrator I do not have any who else installed on this computer.

  When I click New-> 'Software of Simulation'-> 'create', I get a warning box stating 'Capture is denied because the high-density display has been detected. Please set 'DpiAwareness = 1' in AdobeCaptivate.ini and restart the application. »

  

  I went to drive Local (c)-> Program Files-> Adobe-> Adobe Captivate 9 x 64 and found the AdobeCaptivate.ini file and double click to open it.

  It opened in Notepad.

  I found the line "DpiAwareness = 0" as the fourth row from the bottom.

  I changed the value 0 to 1.

  

  I went to the file-> save

  Notepad no did me not the option to save a .ini file. It lists only the .txt option and will not let me save to this file type.

  I tried to save as "All Files".

  "Access denied" appears on my screen and won't let me save.

  

  I can't save the file .ini for Captivate doesn't let me do this record ability of the screen. How can I fix it? Registration form is the #1 reason why I have this software. I don't have this problem before moving on to Windows 10. Also, is there a way to make suggestions to Adobe to enable this capability in a software update/fixes? Thank you!

  Hello

  I just edited the ini file on my Surface Pro 4, also running on Win10. You need administrator rights! It was my workflow:

  1. Find the ini file and copy it to somewhere else (I used the desktop computer)
  2. Rename the old file ini (for backup reasons) to AdobeCaptivateOld.ini
  3. Open the copy in Notepad, under the direction of this line and registered (will keep automatically extending ini).
  4. Moved the copy to the Captivate installation folder
  5. Started to Captivate

  You probably want to change the display of the monitor settings, so if you go to work in Captivate.

• Captivate 3 does not register app I want to record

  I test Captivate 3. I am trying to record an activity in my company's request. I select record new project, then select software simulation, Application. Can I get a dialog box asking me to explain the application I want to save, but it lists all open applications, with the exception of the app to my business! Any ideas why it does not recognize my application open?

  Thanks for the tips. I tried and it worked pretty well, but I tried that out I figured out what caused the problem. All my open applications in an occupant the entire desktop, with the exception of the app of my business that I had resized to size, I wanted to capture the maximized State. Once I enlarged society app, Captivate 3 he listed in the drop-down menu dialog box. Then, once I picked it, I could resize the window of the app to the desired size before you start recording...

• TEB not created simulation training

  I had a similar problem recently. My colleagues and I have the same settings and preferences, but I'm the only one where the ETB is not captured in training mode. I do not understand what it is that is not allowing him to be captured and it is much much too much time to go back and insert a BER for all the shares of text entry.

  I tried to clear my cache of Adobe, cache internet, restored all the settings default to Captivate, rebooted the computer several times to ensure that all updates of the company is properly... About to reinstall the program to see if that will solve the problem.

  Someone knows how to fix this?

  Figured it out! I had waaaaay too many files in the folder of my Temp files in my Windows profile. Once HE allowed, everything worked fine.

• How we prevent stop video capture on the software simulation mode

  Hi all

  I recorded a video of my software, a non-interactive tutorial ( software simulation mode and record mode: demo).

  My software has a debug window showing the values that change frequently.

  In my video, I would record this debug window and do some action on it (this window has a toolbar).

  Captivate correctly save the pointer of the mouse but when i, e.g. clicking a button of toolbar, Captivate adds a legend of text (rightly) but the video stops (the values on my watch freeze).

  How can I stop this behavior?

  Thanks in advance

  You can add static images in a video demo as well. Take a look at this (old) example that was performed using only the demo video:

  Simple to advanced standard Action in Adobe Captivate - YouTube

  Often, I will replace the 'old' FMR slides, still not well displayed in the HTML output by slides CPVC (short video slideshow). I stop recording software, in the project cptx choose the big button "Slides" insert a slide of demo, the recorder is opened and I save the CPVC slide. When you are finished, you can insert with the same touch of Simulation software slides etc. Advantage: you can open the editor video demo of each slide CPVC. Pan/zoom have a much better quality you can achieve with the workflow software sim.

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• image capture does not recognize my iPhone when I connect to my mac?

  I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

  Hello rosrich,

  If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

  If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

  Image capture: transfer images and other elements of your device

  Thank you for using communities Support from Apple. Nice day!