Captivate IDE and screen size

Similar Questions

• whenever I use my laptop and my palms are based on the laptop and I type all of a sudden... my guard resize bigger or smaller screen size

  I try to keep my thumb on the mouse pad Palms when I type, but every now and then my screen resizes more or less until I take my left the base of keyboard sound Palm only when my left hand rests on the base next to the touchpad. I type pretty fast so it becomes boring and yes she also jumps screens or go back to the previous message and I choose ctrl z to cancel and return to my message I was typing... It also switches tabs on me too... don't know why my Palm being to the left of the keyboard on the basis should effect other thing he does after a while. and I have to stop what I'm doing... and go to the firefox menu and change the size of the screen down to 100%, sometimes she's going up to 200-300 other times it comes down to 70-80%, I find this annoying I I wish there was a way to disable the resizing of the screen in the control panel. If it's just to be 100% happy with it I'm I have need it larger or smaller... There should be a way to LOCK... I understand that there are people out there with eye disorders and needs to have the screen size increase by using the + or - but there should be blocked so there's just no matter what is happening on my keyboard or the touchpad or the basis of the cushion... this screen size not will increase or decrease. unless I turn off the lock... maybe this is something that they can be implemented in the next version or do a quick update of the browser

  Maybe a support forum for this laptop brand will have some ideas, because that is not strictly a problem with Firefox only.

• image width - Center and the culture of images to smaller screen sizes and keep the centered text?

  Hi people,

  I have an animation that I use as the header of my page.  It consists of a background image and some animated text blocks that are centered on the image.

  I would like to have the image extends to the entire width of the browser window, keep the image centered on the smaller screen size.  I also want to keep the blocks of text centered on the small screen so sizes.

  the question I have is that in smaller widths, the image 'glue' to the left of the browser window and not centered.  Finally, I would like to "reframe" the sides, but keep the image and the centered text.  comp stage has a min width to prevent him from becoming too small on smaller screens.

  Here is an example of what's going on.  I hope this helps.

  

  the dashboard computer is nested within a div - div, that he has the following properties.

  } .page-in-head-animation

  min-height: 400px;

  overflow: hidden;

  Width: 100%;

  text-align: center;

  }

  and the smaller screens, I have a media query

  @media only screen and (max-width: 768px) {}

  } .page-in-head-animation

  min-height: 300px;

  position: relative;

  }

  }

  so I want the computer on the edge to stop the downward revision when it comes to height of 300px and Center 'crop' from there.

  I have these settings on my stage.

  

  Please let me know if you have any ideas - I've been struggling with this for a while now!

  Thank you!

  You can not achieve what you're trying to animate. You will need to add CSS and script exernallly.

  Here is a link explaining how to Center a background image while the scaling.

  You have a div covering the lively scene.

  Value div, rather than having to animate background image.

  Make the transparent animated background

  Tutotrial: content http://www.minimit.com/articles/solutions-tutorials/fullscreen-backgrounds-with-centered-c

  Hope this helps

• screen size change! I accidentally hit 'shift' and a few other key.

  I hit a key combination by mistake and my shrunken to a box around it... visible browser in the upper left window, there are now options for screen size.

  How do I get OUT of this mode (and how did I get in there in the first place)

  Thank you!

  Hi james, you're probably in the mode of sensitive design for web developers - press ctrl + shift + M to allow, or click on the X in the upper left corner of the page...

• adjust the front panel of the screen size and re - position automatically objects on different systems

  Hello, I designed a vi which contains 5 led is placed at the centre of the façade that occupies the entire screen and 4 corners. However, this vi should be used on different systems, with different screen sizes. But on each screen, I'll need the size of the cover = size of the screen and the light to be placed in centres and corner of this new size of the screen automatically without manual operations and positioning bieng made every time. The option of resizing will perform this task completely or I have to go to some other techniques?

  As far as I know, what you want is not easy to do but it's doable but you have to do it programmatically (no adjustment of Labview). Here is an example for only 2 LEDs, but I guess you'll be able to make it work for your other LEDs.

  This VI maximizes the front and then positioned the 2 LEDs in the Center and top right on the race. LEDs are positioned according to their own corners left, not on the basis of their centers.

  

• sister baby happened to my computer and now my screen size is very small, please help.

  my little sister messed with my computer toshiba laptop and now the screen size is like 1/3 down. could someone please help? I have windows vista.

  Hello
   
  In addition to suggestions of Rick Rogers, a simple reboot should do the trick.
   
  You can also change the resolution and check.
   
  Change the screen resolution
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
  Let us know the status of the issue.
  
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• Can I do Expert Mode and full screen size my default setting for PES 11?

  Whenever I have open a new image in ACR and open image that the editing screen will return to the FAST mode and a smaller screen size.  I then have to click on to change to EXPERT mode, then click to make full screen.  I never had this problem with PES 10.

  (I get RAW images in from outside and not by the Organizer).

  Is there a way to define these default values?

  If you right click on the shortcut of PES 11 and select Properties, is whatever it is checked in the compatibility tab?

• why I get 'Color Finesse requires a minimum screen size of 1024 x 768 and yet I have two full HD sc

  Hello

  Once I try to open 'complete interface' on color finesse 3 on After Effects CS5.5, why I get: 'Color Finesse requires a minimum screen size of 1024 x 768' but I have two full HD screens?

  Thank you.

  In addition to suggestions of Dave, if you haven't already done so, restart your computer. Everything we do is ask the BONES of the size of the screen and pronounced of 1024 x 768. We have seen Windows and the OS sometimes confused and reports an incorrect size. Restart fixes.

  When you check the size of your screen, be sure to subtract the size of the toolbar and of any similar modules you may be running. These all reduce the usable screen size, and we have seen (especially laptops) cases where that reduces the height of the screen below 768.

  Bob Currier

  Synthesis

• Satellite 1805-S204 - not full screen size in Fedora 10

  I have a Toshiba Satellite 1805-S204 and the size of my screen is not expanded.
  I have 1.5 inch black around my screen.

  Anyone has any ideas.

  I m not an expert in Linux but have you tried different screen resolutions?
  As far as I know in Linux that you can change many chart parameters and the monitor, check this box.

  I think a wrong setting.

• Define a more responsive screen sizes

  If I want to put the additional screen sizes when working in my reactive environment how can I achieve this?

  For example, I want to keep the standard screens such as 1024 768 360 but might want to add two additional and design break points for these sizes as well.

  I'm familiar with the use of % instead of px, but even while I meet problems in the quiz display and also some text and button courses.

  I work CC captivate.

  Also apart from this problem: my buttons just do not work or are fairly slow work. I think it has to do with the active and inactive button States. Can I get rid of the option to be off because I have problems by dragging the bar between the two in the distribution panel.

  Hello

  First of all, there is no version of Captivate CC. It was simply never part of the creative cloud.

  You must submit a request to Adobe to request this feature to be added to a future version. To my knowledge, you are locked in three breakpoints. You can change them, but you cannot add additional breakpoints.

  Click here to visit the form wish

  See you soon... Rick

• Tailored courses on more than 3 screen sizes

  If a learner has a mobile device that does not exactly match one of the 3 stitches, what will see?

  • The nearest breakpoint with possibly some white space on the sides

  OR

  • Something between two breakpoints that completely fills the screen, but the objects are positioned between where they are placed on standard breakpoints

  Jay,

  To check how the content will look between breakpoints, you can use the project-> preview option. It will show you a slider in the browser. By moving the slider will change the widths of the preview and the content is displayed according to the width defined in the cursor. The preview will give you an idea right on the evolution of the spacial relationships and the size of objects between breakpoints. You can then re - design the slide (if necessary) by changing the Position parameters according to your needs.

  Tarnish

• Problem with Captivate 8 and SumTotal learning LMS Maestro-

  I get white screen when lance course published under the title of SCORM 2004 using Captivate 8.  All the publication settings are identical to those used with Captivate 7 and all classes of properties and parameters are the same in the LMS as course published using Captivate 7. At the launch of course, instead of the opening of the route screen, a white frame appears showing the playback bar course and LMS navigation bar. Logon screen does not appear until the user clicks on the button play on the PlayBar. No idea why this is happening?  Here is a screenshot of the white frame.

  

  Ron,

  Thanks for the help.  I found a solution for the problem here: HTML5 projects Captivate freezing in Google Chrome, c. 36 + |

  Because it worked, obviously, the Chrome issue 36 comes break HTML5 output.  I hope that the patch solves everything.

• Search for a pdf document to our url from a Captivate project and back

  I created an e-learning module in Captivate 4 and inside that I need for the user to look for a manual in PDF on our server.

  Easy to create the link to the url, which is easy to make this work in the Captivate project and return to the project to continue when it is autonomous.

  My problem is not that; I published the course in an LMS (EDOCEO Elearning Manager) probally especially unknown to everyone and it works perfectly except when you click on the link to the url because it opens the file very well, but when you close the file it also closes the project and you are at the default screen of the LMS.

  Any ideas out there

  Sincere love to all

  Ash

  Hey Ash,

  Just an idea, not sure it will work. I assume you are using the action "Open a URL or file" on success. Click on the small triangle and choose New instead of the current window (maybe Top works too):

  

  Good luck

  Lilybiri

• iPhone screen size 7...

  IM gunna be preordered an iPhone 7 and I was wondering if anyone knew if the screen size is identical to the iPhone 6, as a screen for a 6 and save money protecter I wanted to know if it would fit the 7? Anyone know?

  Both are diagonal 4.7 "screens.  Both are the same height and width.

  https://www.Apple.com/iPhone/compare/

  iPhone 6 - technical specifications