Problem with Captivate 8 and SumTotal learning LMS Maestro-

Similar Questions

• Problems with Captivate 5 and Tweenlite and programmatic animation (single frame)

  I'm just curious to know if someone else out there he uses Cap5 and strengthening of using Tweenlite Flash animations. I found Tweenlite to make my production much more efficient, but it seems that Captivate has a serious issue with it. Our team had to use the widget to synchronize Animation to get one of our timeline based animations SYC would be correctly, but any Tweenlite based animation or Actionscript animation Cap5 go haywire. Common interest issues include, animations from the slide in halfway through their animation, screen flashes (suck on 5 frames and loops) after the deployment of a LMS but works fine locally and animations by playing on the slide wrong and irregular results (sometimes an animation will play well, other times it won't).

  If everyone has the same problems or knows a fix for this I would be incredibly grateful. Otherwise, I think that his return to the chronology of the ol.

  See you soon.

  You may be correct.  But if so, I have not encountered this problem yet.

  The way I have suggested that you implemented the code AS on the high level chronology was that you had only two frames.  The stop(); action takes place on the second image.  There may be a way for use rather an action stop on the first frame and then have the room only the second image slide animation is correct.

• Preloader again a problem with Captivate 5 and 5.5

  Ok.  This gets really annoying.  I downloaded a patch for Captivate 5 problem my preloader.  Now my colleague has Captivate 5.5 and we still have the same problem.  I'm tired of having to return to Captivate 4 whenever I have a project that needs a preloader.  Anyone has a solution.  It is said to use A3 to the preloader in 5 or 5.5.  It doesn't matter if I use A2 or A3.  Nothing works!

  Thank you

  Jeff

  If youv'e ' e summer move files or share them between computers, then the way to preload in the install Adobe Captivate file directory are may not be incorrect.

  Go to preferences and look at the current path shown there for the Preloader.  Navigate to the correct location depending on what version of Captivate you use to edit the file with.  If Captivate 5 or 5.5, your only choice will be to use AS3 preload. Do not access a preloader AS2 in Captivate 4 installation directory.

• I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.

  Mac or PC? Version of the OS? What version of CS?

  Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.

  Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.

• Small problem with Captivate 6 quiz...

  I wonder if someone could help me with this little problem with Captivate 6 quizes?

  I've set up a quiz and disable the playback bar to save screen space

  I turn off the button 'next' on the issues because it allows to the learner in order to bypass the unanswered questions (and does not trigger the incomplete caption)

  And so I rename the button submit to 'next' - and that's fine, but when the quiz is reviewed there is no 'next' button to navigate between issues

  I thought that I might be able to hide the real button following behind the submit button (labeled 'next'), but finds that it is not possible to change the stacking order of buttons issue

  So, how can I stop the learner without going through questions without answer AND allow navigation during the review of the quiz?

  Pointers gratefully received

  Simon

  Hide the next button (Skip) under the clear button.  When you add a quiz for the Clear key is usually on a higher default stacking order.  But if it isn't, just remove and replace the button 'Clear' and it will be over the next button.  Usually, removal and replacement of the buttons on the quiz questions are the only way to manipulate the stacking order.  It's a pain, but this is easily achievable.

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• How can I return to 6.3 4.0 I have never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images

  Hello

  I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images (ie the rotating EGTC)

  Now, I see the image preview and it disappears to the flower, so I did not see one of my photos

  Some would like TO help on this im so not good with this kind of thing.

  Appreciate it in advance

  Let

  Hello

  • When you change the format of images of?
  • What is Windows Explorer or Itunes?

  Try the TV activation

  Enabled and disable the Option 'show window previews (thumbnails) '.

  a. right click on the taskbar.

  b. Select Properties.

  c. check show window previews (thumbnails) "Option. .

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.