Captivate use a Java plugin for browsers and what happens when Java is progressively to our on our LMS SCORM course?

Similar Questions

• What is a plateau of DesktopAgent and what happens when it does not work properly?

  When you start Windows Service Pack 3, I get a message saying that DesktopAgent tray is not working properly.  I'm not fallen on what this problem is or causes does not properly.  What is and how to fix?

  Hi Rose @ Minnesota.

  For your information, Agent Desktop tray is a program used by Qwest to update their setup program during installation DSL (digital subscriber line) based on connections to computers.

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Adobe PDF plugin for Firefox and Netscape 10.1.6 question

  Using Firefox 20.0.1 and when I check updates the Adobe PDF plugin for Firefox and Netscape 10.1.6 is checked as "vulnerable".  I have download and that you are trying to install sections of process section where the files need to be downloaded and I get a message stating the program is already installed.    Any help?

  Thank you

  FJ
  

  Use the version of Firefox ESR ( http://www.mozilla.org/en-US/firefox/organizations/all.html ) which is the one that Adobe apparently officially supports and works.

  http://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

• Using the same PIN for input and output

  Hello

  I would use a single PIN for input and output.

  I'm experimenting with writing a driver for the DHT11 that using a single interface

  I have the following code to open the PIN, but it fails

  GPIOPin dhtPin = (GPIOPin) DeviceManager.open (new GPIOPinConfig (0, 17, GPIOPinConfig.DIR_BOTH_INIT_INPUT, GPIOPinConfig.DEFAULT, GPIOPinConfig.TRIGGER_NONE, false));

  VM - iso [DAAPI] =-1: not supported direction was placed for 17 GPIO pin number. Open failed

  jdk.dio.InvalidDeviceConfigException

  -com/oracle/deviceaccess/gpio/impl/GPIOPinImpl.openPinByConfig0 (), bci = 0

  com/oracle/deviceaccess/gpio/impl/GPIOPinImpl. < init > (), bci = 87

  -com/oracle/deviceaccess/gpio/impl/GPIOPinFactory.create (), bci = 6

  -com/oracle/deviceaccess/gpio/impl/GPIOPinFactory.create (), bci = 3

  -jdk/dio/DeviceManager.openWithConfig (), bci = 49

  -jdk/dio/DeviceManager.open (), bci = 6

  -jdk/dio/DeviceManager.open (), bci = 2

  -dht11 / DHT11. < init > (DHT11.java:42)

  -dht11 / DHT11. < init > (DHT11.java:37)

  -dht11/DHT11Midlet.startApp(DHT11Midlet.java:25)

  -javax/microedition/midlet/MIDletTunnelImpl.callStartApp (), bci = 1

  -com/sun/midp/midlet/MIDletPeer.startApp (), bci = 5

  -com/sun/midp/midlet/MIDletStateHandler.startSuite (), bci = 264

  -com/sun/midp/main/AbstractMIDletSuiteLoader.startSuite (), bci = 38

  -com/sun/midp/main/CldcMIDletSuiteLoader.startSuite (), bci = 5

  -com/sun/midp/main/AbstractMIDletSuiteLoader.runMIDletSuite (), bci = 132

  -com/sun/midp/main/AppIsolateMIDletSuiteLoader.main (), bci = 26

  I have the following permissions value

  jdk.dio.gpio.GPIOPinPermission "*: *" 'open, setdirection '.

  jdk.dio.DeviceMgmtPermission "*: *" 'open '.

  I tried a few other pins too, I don't know if some ankles are entered or only output pins.

  Any help would be appreciated. I could not find documents explaining how to configure more than one action for a permission ( 'open, setdirection'), so I tried just until he stopped to complain about the values...

  What I need is to open a PIN, set it OUT, write a few high and low values... set it to the direction of the ENTRANCE, and reading back high and low values... But right now my GPIOPinConfig seems to be problematic

  (... Configuration of the meaning to DIR_INPUT_ONLY or DIR_OUTPUT_ONLY, works until I try to change the direction of the port - what is expected...)

  Hi Charl-

  As far as I KNOW, he is there no current plan to apply 1 thread in Java ME Embedded.

  I also looked at Pi4Jand they do not also support 1-wire, however, there is an enhancement request to add support for the bit hit Linux driver will have to perform 1-wire work.

  The raspberry pi support it, it's just Java ME holds back me.

  BTW - the article has been referenced in the enhancement request notes that he is not taken in native support for 1 wire on the Raspberry Pi - it requires a Linux kernel driver module.

  Tom

• I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

  I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

  Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

  This user tip can help: when to charge your iPhone or iPad

• I use Windows Live mail for months and suddenly can not receive or by e-mail. I'm getting Error 0x800CCC0E, socket 10013 error ID.

  Windows Live Error 0x800CCC0E, socket 10013 error

  I use Windows Live mail for months and suddenly can not receive or by e-mail.  I'm getting Error 0x800CCC0E, socket 10013 error ID.  I don't think that all the parameters have been changed recently.  What motivates this error?

  This computer is home and cable? If so, this is the e-mail scan probably the cause. According to your AV program, you may need to reinstall.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.

  Also note that WLMail has its own forum.

  Windows Live Mail Forum
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Error: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing.

  Original title: the registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. reinstall iTunes

  I've loaded and discharged Itunes 5 times and still get the same error message box. This error does exactly what he says, I can not burn anything in my itunes library. ITunes worked great in XP-3 no problems. It will not work on Windows 7-64.  I can download and play songs from any site, but can not burn anything.  And I don't have any other burning software on my CD PC

  Hello PohlCat,

  Given that you have uninstalled and reinstalled iTunes without correcting the problem, it may be with a 3rd party product causes a problem.

  I would look at the post here to see if this solution can help you. It's from a 3rd third party site, you should use at your own risk, because it has not been tested, but seemed to help others with the same error that you are experiencing.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Why fiber optic use 4 types of connectors? And what is single mode or multimode optical cable thinner?

  Hello

  To bookmark this site.  He may have more information for you. Wikipedia

  Joining lengths of optical fiber is more complex than to join the electric wire or cable. The ends of the fibers must be carefully cleavedand then spliced, either mechanically or by merging with heat. Fiber optic connectors for removable connections are also available.

  Scroll to the termination and splicing

• I recently bought an external plugin for Lightroom 5.  However, when I choose Photo &gt; edit in &gt; all my options are grayed out.  What should I do to have my Edit in options available.

  I recently bought an external plugin for Lightroom 5.  However, when I choose Photo > edit in > all my options are grayed out.  What should I do to have my Edit in options available.

  

  Hi Benoit,.

  Thanks a lot for this.  I imported a new series of RAW photos and options will appear.  Thanks again.

• whisch are OK for undo_retention and what is the difference

  Hi all
  
  whisch are OK for undo_retention and what is the difference
  
  
  SQL > select max (maxquerylen) of v$ undostat;
  
  MAX (MAXQUERYLEN)
  ----------------
  6060
  
  SQL > select max (maxquerylen) in the dba_hist_undostat;
  
  MAX (MAXQUERYLEN)
  ----------------
  17221

  Hi amal.

  You can use begin_time & end_time v$ undostat-> to specify the time interval that you want.

  A brief note, of what you discussed here:

  maxquerylen

  Identifies the length of the longest request (in seconds) in the Forum during the period. You can use this statistic to estimate the right setting of UNDO_RETENTION initialization parameter. The length of a query is measured between the open time of cursor for the last time to fetch/execution of the cursor. As the length of these cursors that have been read/performed during the period are reflected in the view.

  V$ UNDOSTAT is dynamic, display of the current statistics.

  DBA_HIST_UNDOSTAT displays the history of the histograms of statistical data to show how the system works. Available statistics include undo space consumption, simultaneity of the transaction and the length of queries in the instance. This view contains snapshots of V$ UNDOSTAT

  hope that helps.

  Kind regards
  X

• I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...

  I don't have internet connection, so can I use offline adobe indesign, photoshop? and what is the product adobe cos cs6 is not available more...

  CS6 products are always available through Adobe:

  Buy CS6:
  ----------------------

  http://www.Adobe.com/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

• HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press

  Hello

  I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

  The laptop is a little new: I use only 2 months.

  1. number and product name

  HP EliteBook 8560p
  НР LQ589AW

  2 operating system installed (if applicable)

  Windows 7 Professional 64 bit

  3. error message (if any)

  No error message

  4. all changes made to your system until the problem occurred

  My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

  Additional details:

  In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

  I already tried things:

  1. Reinstalled all the HP drivers from original CD.
  2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
  3. Checked the mobility Center as suggested in one of the threads available on this forum;
  4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

  Thanks for any help!

  Anatoliy.

  I managed to solve the problem...

  Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

  I hope this helps.

• I have a duel processor. C drive is nearly full E reader uses only 30%. What happens when the C drive is full?

  My laptop has 2 dual processor x 75 GB.  Tried to move the files to the E drive but they double and are difficult to locate. Life should be easier than this!  C drive is nearly full, E drive uses only 30%.  What happens when the C drive is full?

  [Moved from comments]

  Simple!

  You get a BIGGER hard drive.

  The 'norm' for laptops these days is at least 500 GIGs.

  Which is the same amount that I have in my table.

  2 x 250 GB.

  I have XP Pro on one single, Windows 7, on the other. (And each of them uses ONLY about HALF of these hard drives!)

  In a month or two, I'll upgrade to 2 x 1 terabyte hard drives. sounds a little one 'kill too much', I know, but hey, my computer IS able to be updated that he got so far it?

  Yours is in need of an upgrade too, suggest that there is, to solve your problem!

• What happens when you reinstal XP OS with the cd that takes me to service pack 2 and I'm at service pack 3

  I bought TurboTax and downloaded, but can I have downloaded previously because I was unable to install due to the previous installation.  After that 2 hours of phone support with TurboTax including screenshare, they stated that the problem lies in the registry. It was damaged and I had to reinstall my OS.

  What happens when you reinstal XP OS with the cd that takes me to service pack 2 and I'm at SP3?

  I finally found my OS reinstall CD, but it's waaaay above my comfort level... what I do now.

  Frankly, if TurboTax is causing this much trouble, I would use another company as the income tax act.

  Of course, you can reinstall Windows. It's a shame, if that's the only way to solve this problem. :-(
  For later use, it is sometimes necessary to download the installation file, physically disconnect from the Internet, set up a clean boot (using msconfig startup diagnosis), reboot and THEN install the large program (and then undo the clean boot, reboot and re-connect to the Internet).

• What happens when the space used hits space put into service?

  I work for the first time with VMWare software and everything while browsing the virtual machines, I saw that the space used was about to hit the space provided. I was doing some research on the definition of these 2 and I don't get a solid and reliable definition. Does anyone can say exactly what they are and explain what happens when the space used hits the space provided?

  Thank you

  Welcome to the community - Itsounds like your virtual drive are configured as thin provisioned - their size increases as disk space is consumed - when you hit provisioned used equal is a machine virtual will be error if it tries to use multiple disks FEPs - usually with a disk space error output - your options are to add more data stores and move virtual machines to the new data store.