Capture the Moon?

Similar Questions

• I can't view the video of the Moon I posted on facebook works on youtube video I made

  I can't watch the video of the Moon I posted on Facebook works on you tube the video I did, I could answer Tuesday, I will be not available

  It's fixed now, thank you, the problem was, it was work on ie but not mozilla, but it is fine now

• Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  It is to capture a piece of the element you want to screenshot, make a fire using full-screen control + 3

• After capturing the BIOS with srsetupwin64.exe a supervisor password is set

  After I capture the bios with srsetupwin64.exe settings, so a supervisor password to restart the computer. I have only to capture settings in the bios with the command "srsetupwin64.exe/c /kpap d:\" The command was not successful (no file exists), I get the message:

  ERR - passwords do not match

  Err (8) - secure information could not be written

  Model: T540p (20BFS05l00)

  SRSetup version: 2.11

  BIOS version: 2.19

  It's not understanding why now a supervisor password. Now, the device is not usable. Please help, respectively according to me a replacement is necessary, but I think it's a bug.

  Concerning

  OK, the books have been ordered from a pool. And lenovo has set a password for the supervisor for the books of the pool. Now, information has arrived to the technician :-)

  Sorry for the false alarm.

  Concerning

• I have an SMU-5672 and capture the baseband on an oscilloscope. Can I do this?

  I have a generator of signals Vectoriels SMU-5672 and to capture the baseband with a reach to compare synchronization with my receiver (HAD).  I would like to connect a scope to the SMU-5442, but don't know if that problem.  Of course, I am particularly concerned by damaging the material.  This method would be the ideal way to check my timing of answer, but if you can't, I'm open to other suggestions.

  Yes, you can do it.  The device driver 5672 configures the 5442 for use is the direct path.  Direct tension max is 1 Vpp into 50 Ohm, 2 Vpp scope in high impedance, so make sure that your scope is put in place for this.

  Continue to use the 5672 as usual, but with your scope related to the CH 5442 0 output.  Assuming that the scope leads his entry (should not), there is no concern damaging the 5610 or 5442 by doing this.

  Unless split you the signal (not what I say), you won't get a signal off the 5610.  It is not clear how you planned to compare the signal for synchronization with your DUT.  No signal can be OK if you compare the time vs a trigger digital, may be exported from the 5442.  Be aware, however, that IF IN addition to RF Out 5610 is about 1.2 US.

  Also note that if you set NIRFSG_ATTR_COMPENSATE_FOR_FILTER_GROUP_DELAY to true, and a marker on sample output 0 event, event marker will be delayed to address delays in the processing of signal in the 5442 and delay analogue 5610, causing the marker event should be harmonized with the time "sample 0" appears on the RF Out 5610.  This attribute was added after the original version and the default values to false to preserve backward compatibility.

  If you are looking to compare calendar, setting the true Compensate for filter Group delay is actually what I would do rather than split the signal IF Out 5442.  You can check how much are aligned by tuning the 5672 at a fairly low frequency for your bezel measure.  5610 late is dominated by the IF filter, which is independent of the RF frequency.

• How do I capture the output of voltage full bridge with Signal Express NI9219

  Hello.  I'm trying to do and calibrate a load cell with the installation of full-bridge strain gage.  I use a NI9219 module with a cDAQ chassis.  Is it possible to capture the actual output voltage?  Signal Express gives me a value of strain, but I really need to know the output voltage.  Where to look.  I need only two channels for full-bridge.  I think that could connect the wires to the two remaining channels and read the output voltage of the strain gauges which would be connected as a tension of the 9219 entry, but I think that Signal Express could give me the voltage and output voltage directly.  Any input would be appreciated. Thank you!  P.S. I only use this equipment on occasion and am not the more familiar with it, so keep things simple for me.  Thanks again.

  Hi jgh@AET,

  The NI 9219 measures the ratio of voltage full bridge in hardware sensors, allowing any variation of the voltage to cancel. You won't be able to measure the output voltage of the sensor regardless of the voltage without additional channels, but you can measure the ratio of raw tension using the type of Bridge (V/V) . You can also use the type of measure of Force (bridge) measurement of load cell with engineering units (N, lb, kgf, no strain).

  This screenshot shows where the two Bridge (V/V) and Force (bridge) can be selected in the DAQ Assistant:

  

  These types of measurement were added sometimes around DAQmx 9.1, so if you have an older version of NOR-DAQmx, your DAQ Assistant maybe not them. The latest version is currently 9.4 of NOR-DAQmx. Front of NOR-DAQmx 9.1, the approach to recommend to measure the load cells was to use the custom with Excitation voltage type and a custom scale. However, Tension Custom excitedly can't Bridge of calibration in the DAQ Assistant.

  Brad

• How to add a video option to capture the image

  Use a CCD camera to capture the image. I need to add the ability to capture the video image (live) so that I can focus and adjust the image and then capture it for treatment. Y at - it an option. I searched the SDK as well as the camera but did not.

  I guess you want to adjust the focus see streaming in labview (correct me if otherwise). You can easily do this by using a 'acquire' inside a while loop. Use a capture button to exit the while loop and process/save the captured image.

• Not able to capture the signal in the TDS 3032 B

  I use the 3032B TDS oscilloscope. I am not able to capture the signal in the oscilloscope or the LabVIEW. I use the RS 232 communication between the oscilloscope and the system. Y at - it none of the oscilloscope settings. Please help me.

  Kind regards

  Renaux

  I tried and got he was able to capture the wave and also display in the program.

  

• How to capture the signals using the macro excel 2007 with lecroy activedso object

  Hello everyone...

  I hope you could help me.

  SURVEY:

  I have a macro code, but there is no output from the image displayed in the specified activedso object after successfully connected to the specified IP address.

  I think that there is a problem by specifying the activedso object.

  THE MACRO CODE:

  Private Sub CommandButton1_Click()

  Dim o As Object
  As Boolean Dim success

  Set o = CreateObject ("LeCroy.ActiveDSOCtrl.1")
  ipadd = ActiveSheet.Range ("B1"). Value ' in a specific cell ip address value

  With ActiveSheet.OLEObjects ("ActiveDSO1")
  success = o.MakeConnection ("IP:" & ipadd) ' if the true value, capture the current image of the osci waveform digital lecroy and displayed in the object activedso
  If (success = False) then
  MsgBox "not found DSO! Address can be a problem...  '& o.ErrorString '.
  GoTo 999
  End If
  Ends with

  999 set o = Nothing

  End Sub

  If there are questions or disputes my inquiry please do not hesitate to answer.

  Hello Jeff,.

  It is also a pleasure to meet you!

  There is a method "StoreHardcopyToFile", that you can use to get a picture and save it on your PC.

  Here is a picture from the help file ActiveDSO showing the method with a VBA example to use.

  

  Let me know if you have any challenges.

  Kind regards

  Leonard Brown
  Technical sales engineer
  Teledyne LeCroy
  1-800-553-2769

• How to take photos of the moon with a rebel T5

  I had my camera for a very short period of time. I want to take some pictures of the Moon and I was wondering what I should use the settings.

  You will not see stars if the Moon is correctly exposed. (Remember, it was one of the 'clues' to the moon landings "rigged". The Moon is much brighter than stars and requires much less exposure.

  Note that in the example above, he used HDR, in this case, it is essentially a double exposure.

• How can I capture the time of startup and logon for XP users on my domain?

  How can I capture time (or time)
  -for users to access the logon screen (references)
  -users press OK after entering his credentials on the logon screen
  -Office XP that appear in a usable format moderately (for example, the user is able to open Explorer)

  We have problems with the connection of slow/slow start (SBSL) with Windows XP on the field and we would have 'real' numbers before you start so that we can have a base line and that you don't need to ask users what they mean when they say "it's a bit slower than usual" (and we'll know what stage of the startup procedure is slow). We would like to be able to capture (without intervention of the end user) following in a file or somewher event schedule so that we can measure how slow (or not), they are and what stage is slow, and what days it was slow. We are already capture the userenv logs.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• HP scanjet G4050: habit of scanning the dark negs. (the Moon in the dark sky)

  Just got my Scanner HP Scanjet G4050, love it so far. It analyzes all of my negatives, those I have which is mainly at night. Example: The Moon is in a dark night, or night scenes, the negs are mainly white with dark, either above or under presentations, spots do not understand this area.  any help out there? Thank you

  Sorry for wasting your time. It was scanning all the negs after all. I just had to move the selection to the negs were not selected by scanner. All inclusive and I thank you. I scanned over 100 negs and it works fine, just a little slow, but life should slow doen.

• How to capture the pointer when you use print screen in Vista?

  I am writing instructions for three classes of Excel, and I want to capture the different sliders to include in the directions.  Of course, when I use print screen, they disappear, so nobody knows how to capture them?

  Hello

  I suggest you to try the cutting tool and check if it helps.

  Use the cutting tool for screenshots:

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  I hope that helps!

• Can we create a rule to capture the URL string in the Hits in the APM cartridge.

  Hi team,

  We have an obligation to create a rule/alarm alert when there is string "File not found" are there in the 'LINK' when we capture the Hits. Please let me know is possible to create this kind of rule in Foglight.

  Thank you

  Shashank Soni.

  To follow on what David said, you can find this useful guide:

  Configuration of the analyzers of success

  Hope this helps,

  Shay

• capture the screen in sim

  I was wondering which button in the Simulator, you can use to capture the sdreenshot?

  Thank you!

  Try VM > screenshot, it if works at all the