After capturing the BIOS with srsetupwin64.exe a supervisor password is set

Similar Questions

• x 61 was updated the BIOS with 7nuj21us.exe Failed BIOS update utility

  Only, I have restored my x 61 to the original settings due to a problem with the blue screens and decided to update the BIOS right afterwards.  I followed the directions precisely and installed all 21 of each component for this model.

  I then turn off the computer and turned it back this morning to continue to load the software.  The system started with the fan running at high speed and stopped at the ThinkPad screen.  However, nothing happened after pressing the ThinkVantage button and F1 or another touches besides.  I left for a few hours, but finally determined that I could not turn off or do anything with the machine.  He just hung there.  I did finally remove the battery and replace it and now there is not able to record when the machine is connected and it does not start.

  Is there something I can do to recover the system?  I suspect that the answer is a replacement of the Commission.  The update of the BIOS was not at the same time with something on my computer.  I have just 2 years in the warranty period at the United States, so if I need to replace the card, what are the best options?

  Thanks for your help and comments... it is a very frustrating twist, because this is my work machine.

  Dmtrich,

  Certainly, we can download and system flash here, just to be safe.

  I'm sorry that you have had this problem, I sent you a PM and email and we can follow up there to work through your specific.  Please let us know your concerns!

  Best regards

  Mark

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Maybe it's to rewrite the BIOS with crisis recovery mode?

  Hey everybody,

  my laptop 'freezes' during BIOS 'PHOENIX' updated 2 years ago.
  SERVICE told to change the motherboard, the price as new pc, so I bought new laptop.

  I keep looking at the toshiba forum always, so I read a lot of information on the MODE of RECOVERY from CRISIS.
  so I tried to check my laptop died after 2 years.

  My satellite M100 starts in crisis recovery mode Fn + B.
  my laptop starts up to CRISIS MODE, but do not read the USB STICK
  I did the flash with the CRISDISK 1.0.0.4 USB key program, but I'm not sure I did it way right!

  My question is:
  is it really possible to REWRITE the bios with crisis recovery mode, where I can read more information on how to do it.

  I want back my M100 :)))

  Hey,.

  As Akuma writes that you should try a USB FDD instead a USB key. Key USB is supported only on new models of laptops, but as far as I know USB FDD will be always supported.

  In any case, just for your information: you should know what you're doing. It is a delicate and risky procedure and in the worst cases you might destroy the whole ROM module but if you already have a new laptop I think that it s a problem for you. ;)

• Satellite L50-B-177 - after upgrading the BIOS can not use the Polish symbols

  Hi, I'm newbie here. This is my first post, so sorry for the plain text.

  I have a problem with the laptop Satellite L50-B-177 1 month of my wife. After update BIOS (from Toshiba Service Station) to version 1.70 I have this problem: it is impossible to use symbols of Polish that comes with ALT + z, ALT + x, ALT + c. other - ALT + a - works normally.

  Problem is the operating system independent (even on the live session of Ubuntu). I understand that this is a specific problem for the location of the Poles, but causes cell useless for my wife (she is a teacher and write a lot of text). As much as I know BIOS downgrade is not available for customers, and the weeks of waiting for the new package of BIOS is out of the question.

  Any suggestions will be appreciated.

  Hello

  This problem occurred imadiately after updating the BIOS?

  Have you tried to set the BIOS settings by default once the update is complete?
  If this isn't it.

  Also, check if the Polish keyboard language was chosen correctly and as a default value.

  Comments are greatly appreciated.

• Satellite M40 - how to reflash the BIOS with the same version?

  Hey guys read the forums trying to find a solution for my problem. After that I reformatted the hard drive with the original CD every time you restart computer that wifi will go down, even if the switch is turned "on" and will not come on until you turn off manually and powered.

  The last time I fixed it by the BIOS update (newer) 1.70 this time I can't reflash BIOS since it's flash-based window and it verifies that I have 1.70. I reinstalled the latest drivers and software for all. I have searche too many old BIOS files if someone older mind Sending via 1.60, 1.50, for this computer would be nice greatrly it is M40 (PSM40E), it is the model with the video card Nvidia 6600.
  Or any idea how can I reflash 1.70 again?

  Thank you, Daniel

  Hello!

  Flashing the BIOS with an equal or older version is not possible. Therefore, you must go to an authorized service provider.
  Technicians can relfash with a same or older version.

  If you don't know where is the nearest ASP you should look on the Toshiba site. There you can search for it.

  Good bye

• T530 does not start after upgrading the bios to V2.65

  Hello..

  I flashed the Bios to V2.65 under Win 10 via Lenovo Systemupdate.

  After the restart I had set default Bios and save the changes.

  Start the laptop it hang in a window to select the boot device.

  When I press on my Samsung SSD EVO nothing happened.

  I'm trying to reinstall the Bios with boot-CD. Tool said: there is no need, organic cause is real.

  Downgrade to old Bios in possible (?) not...

  It please can someone tell how to fix this?

  It comes to my work machine, and this is a disaster!

  Thanks MajorM

  Hello..

  found the solution...

  > Disable menu security-> "secure starting".

  > Start menu: UEFI/Legacy Boot-> legacy set or both

  too long, I remember. I never had problems with the bios updates.

  but it was my last... never touch a running system

  See you soon...

  MajorM

• After upgrading the bios to version 2.13 t430u, it freezes at black screen

  Hi all

  After upgrading my lenovo T430u bios to version 2.13 it freezes at a black screen, and windows does not load. My machine has windows 7 Professional and the only way to make it work is to reset the bios settings, but after awhile, it freezes at black screen and windows 7 does not load again and need to reset the settings of the bios once more. Hope someone of you gyus can help me with this since is very frustrating.

  Lenovo has released a BIOS updated for ThinkPad T430u that resolves customer reports of black screen after upgrading the BIOS.

  CHANGES IN THIS VERSION

  Version 2.15

  [Problem resolves]

  -Fixed a problem with the black screen after BIOS update

  -Fixed a problem with the gray screen when turn off Bluetooth in the BIOS Setup

  V2.15 BIOS can be downloaded here: http://support.lenovo.com/us/en/downloads/ds031724

  Thank you

• ProBook 470 G3: ProBook 470 G3 fan system after flashing the BIOS errors

  B has recently purchased a HP ProBook 470 G3 with i7 CPU. When I got the laptop I placed my own memory and M.2 SSD in and performed a clean installation of Windows 10 x 64. Everything was fine, I installed all the drivers and the laptop worked perfectly. However, when I flashed the new BIOS, V1.07 Rev A, I started to have problems.

  I use the laptop for academic purposes, I so open and close several times a day. After flashing the BIOS again, the laptop awake sometimes not, and trying to turn off it I had to remove the battery. Would not even holding down the power button for 20 seconds. While booting after removing the battery, I'd get a system error, 90 b error code fan.

  I tried re flashing version 1.07, but returned eventually to version 1.06. This version works very well. It was a real let up to me, given that this laptop costs €1400,- and should be a book reliable business.

  Is their another experiecing the same problems? If so, how do fix you it? And no one knows when they will be a stable version of BIOS V1.07?

  Use the PC Hardware diagnosis UEFI to restore the previous BIOS so that that you flashed cause questions.

  Press the power button and then immediately begin to press the F2 key to evoke the Diagnostics menu.

  Choose firmware management. In the menu next, choose and click on revert to the previous version.

  You can also create and use the 3-in-1 usb to accomplish the same.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• Bluetooth not available after upgrading the BIOS on HP g62-a60EM

  After upgrading the BIOS, I can't use bluetooth, as I can't see it in Device Manager. I've updated the BIOS with the file sp55430 on the support site. Battery is not holding a charge, it runs out after about 30 minutes. Back BONE back then now, I can use bluetooth. My OS is Windows 7 Professional 64 - bit - Slovenian.

  If anyone can help?

  Kind regards

  Dragan

  Hello

  Try to update the BIOS again. After that make sure that the wireless and Bluetooth lights is lit. Also download and installed the drivers of bluetooth and verification.

  After the BIOS also check in BIOS if Bluetooth is turned on:

  Menu of the System Configuration > Integrated device options > Enable/disable integrated Bluetooth Radio device
  

• After updating the BIOS, speakers produce no sound and iTunes and WMP did not recognize media files.

  Hi people. I got an update of the BIOS that has been installed automatically today. Since the update I lost all sound to my speakers and for the most part, my headset plug into the socket. I ran troubleshooting (States that the speakers are working properly), I rolled back and updated the drivers audio, quadruple checked all the settings, did a hard reset... nothing seems to work for her. Have no idea while iTunes or WMP won't play all my music now. Any help would be greatly appreciated. Thank you! (I have a HP Pavilion dv7 entertainment notebook running Windows 7)

  Hey vélorution,

  I see that you are having a problem with not getting no sound after upgrading the Bios.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• What is a cheapest Toshiba laptop with PXE in the Bios with the XP support

  I am a reseller of Toshiba.
  A client asked me this question, and I was hoping someone here could help me answer:

  > What is the cheapest Toshiba laptop which has PXE in the bios with XPP?

  Customer is downgraded to XPP, looking for a low cost which will always start LAN laptop. Good that now they buy the L300 and indicated they are not PXE bios. Any ideas to what series of portable Tosh they must migrate?

  Thank you
  -Alan

  Hello

  PXE means that you might be able to boot from a local network.
  AFAIK all laptop Toshiba supports this option.

  But most laptops are pre-installed with Win Vista and delivered with Win Vista.
  Some professional laptops come with a second disc that allows to downgrade the laptop to Win XP.
  But these professional laptops are not cheap.

• Satellite L650d-120 does not load after upgrading the BIOS 1.7

  After upgrading the Bios up to 1.70 my laptop is no charging current, but always works to the AC adapter.
  Can I do something on my own?

  Hello

  First of all, you should set the BIOS to default settings and need to save the changes.
  You must also leave the AC adapter plugged into the laptop for a longer period of time.

  Welcome them

• Tecra A10 - cannot change the settings of the BIOS with supervisor password enabled

  Hello
  I activated a supervisor for 1.50 acpi BIOS password.

  Since then, I am not able to change the settings (for example etc. - the right of the screen of the BIOS boot order does no more).
  I access the bios with pressing ESC on the boot process, then F1 when prompted "" check system, then press [F1] key. Problem is that I don't ask the supervisor password.
  There should be a prompt for the supervisor password, but it's not. So I am not able to connect as a supervisor.
  I know I can manually change the boot sequence by pressing F12 during startup, but this strict solve my problem.

  THX in advance
  elitecamper

  Have you tried to update the BIOS? On the Toshiba site, I can find a newer version that you have right now. Check it!
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before setting a supervisor password load default settings in the BIOS and then you can set the password and try again. Maybe it works.