Card mother HPE-400f

Similar Questions

• Replacement card mother HPE - 180 t

  During a powersurge. my onboard LAN is fried. The motherboard is an Asus Truckee 1.04E01; trying to find a new or a model that can replace the current in the same form factor for the HPE-180 t. Suggestions appreciated...

  Hello TimWill,

  Take a look at your upgrade and Service of Guide, which will help determine which is compatible for your HPE-180 t.  Please let me know if this helps solve your problem.

  Good luck!

• Replacement card mother HPE 580t

  My power front panel lights have definitively failed after months of "flashing".  Connections not tested, no 5v to interface board. How can I get a replacement motherboard.

  Hello

  Please call the HP technical support and order the part.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  
  

  
  

• What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge

  You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!

  @ Big_Dave

  Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;

  Intel Core i3-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i3-3xxx (Ivy Bridge) Dual Core	456
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core	152
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core	756
  Intel Core i5-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxxK (Ivy Bridge) Quad Core	676
  Intel Core i3-2xxx (Sandy Bridge) Dual Core	756
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core	256
  Intel Core i5-2xxx (Sandy Bridge) Quad Core	95W
  Intel Core i7-2xxx (Sandy Bridge) Quad Core	95W
  Dual-core Intel Pentium G6xx (Sandy Bridge)	756
  Dual-core Intel Pentium G6xxT (Sandy Bridge)	256
  Dual-core Intel Pentium G8xx (Sandy Bridge)	756

  and supported memory;

  Dual channel memory architecture
  Four DIMM DDR3 240-pin connectors

  Supports DIMM DDR3 modules

  PC3-10600 (1333 MHz)

  PC3-12800 (1600 MHz)

  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB and 4 GB DIMM

  Supports up to 4 GB on 32-bit systems

  Supports up to 16 GB on 64 - bit systems

  Frank

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• H8-1223: card mother HP Angélique Label of ports and diagram

  Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case.  The problem is the case connectors are labeled, but aren't the ports on the motherboard.  I need to have the labels on the ports and connectors of my Board of Directors.  The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset.  I need information on the place where to connect or if these connectors at all.  I'll try to send some photos if I can understand how this Bluetooth to my cell phone.

  

  On the left is the cornerstone of HP mother.  I wanted you to see the ports that are on the map. PSWD HP LPC.  The line is the Corsair Obsidian Series 350 d connectors.  How can I connect these?  Or do I really need them?

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• card mother Memphis-b: b of memphis

  I bought a new case for my computer, my computer has card mother mephis - b inside and I do not know what pins match the power switch, power led, ect there at - it a model that explains what the pins are what? Help, please.

  Please try the stitching as shown in the graphic below;

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pavilion Elite 300Z: identification of card mother sata socket

  My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?

  The plugs are numbered from 1 to 6.  The boot order will follow in succession.

  I found a reference.  Can you check the color and number?

  Dark blue - disc 1

  White - disc 2

  Light blue - Disc 3

  Yellow - disc 4

  Red - disc 5

  Black - disc 6

• Card mother MS-7613 Iona: Corsair XMS 3 2 X 4 GB DDR3 1333 mhz compatible?

  Hi all.

  I have a simple question: is this compatible with the standard ram card mother MS-7613?

  http://www.Corsair.com/en/CMX8GX3M2A1333C9

  How did you select the Corsair ram?   I can't find a link suggesting its compatibility with your exact computer. I found three different modules 4 GB here who are recdommended.   Found an example of it on Amazon.

• Direction fan CPU HPE-400f

  Hi, I have a HPE-400f desktop PC and I took out the cpu fan to clean the heatsink and the cpu fan. But when I forgot which direction blows the cpu fan when I put back it together. I think it was blowing towards the radiator, so I put it with cpu blowing towards the radiator fan. Can you please tell me if it's supposed to be blowing closer or away from the heat sink? I want to be safe, I put it in right place. Thank you

  Hello:

  If the fan is mounted on the radiator, it should direct the flow of air to the radiator.

• I get a Toshiba satellite 1900-102 with a default card mother work

  Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?

  Or does anyone know where to find that?

  Hi Erdl,

  I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!

  In my opinion, you will have more luck at ebay or used equipment selling home pages!

  Sorry
  Campino

• Questions card mother ThinkStation D20

  Hi I was wondering the card mother D20 does support Geforce SLI? Ordinary GPU not of Quadros?

  Also I was wondering what is the shape of the motherboard? Is it E - ATX or ATX?

  Welcome to the forum

  SLI is only supported by Quadro in workstations. It is a limitation by NVidia, not Lenovo. Very few applications workstation (CAD/DCC/oil/gas/etc) supports either benefit from SLI anyway so diminishes the need of this.

  Map of the D20 system is a layout owner but closer to E - ATX. You need to change your D20 chassis if you are planning a Board from the aftermarket. The spacers will be the biggest obstacle with wiring being a close second.