Pavilion Elite 300Z: identification of card mother sata socket

Similar Questions

• Pavilion Elite HPE580t: PEGATRON TRUCKEE card MOTHER. ROM FILE

  Windows 7 Ultimate 64

  Intel Core i7

  Card mother Pegatron IPMTB-TK

  Unfortunately, I bricked my pc when flashing the bios to v6.12. I'm trying to downgrade bios to 6.10 which worked well.  I can't load windows from the hard drive.  I started with success to BACK of USB and can run AFUDOS but I think that I don't have the right. File ROM.  How can I create a. ROM file since the .exe?  Or someone has it all. ROM prior to version 6 I could use? Or can I use a .bin to Flash file this motherboard.

  @coneybug

  Try F8 during startup and see if you can boot into safe mode.  If the default BIOS have changed as the <->RAID AHCI, then you may experience a blue screen.

• HP Pavilion Elite m9040n Desktop PC card mother Layout

  I have a desktop HP m9040n and was tinkering autour inside. Long story short, I don't remember where the 2 hard drives and the cd player plug on the motherboard. All 3 are sata and can't seem to understand what command and ports as sata cables plug in. If someone could help me out here, it would be greatly appreciated.

  http://support.HP.com/us-en/document/c01077641

  Hello Bostel, when you look at the motherboard in the case, the lower right corner is where the Sata ports.

  The port0 is on the right of the Sata ports closer to the top of the Board of Directors. This is the port where the hard drive0 or hard drive must be connected to.

  The port in front is where I connect the second hard drive and the port under the port1 is where to connect the DVD player.

  It was suggested that the Sata port0 is the boot hard drive port, but I connected the hard disks and DVD drives at all of these ports at one time or another and found no difference in the performance of the system.

  This could make a slight difference if you have the hard drive configured in a Raid array.

• HP Pavilion Elite m9340f replacement video card and power supply

  Hello

  I bought my HP Pavilion Elite at Best Buy m9340f in 2009 and brought it to the Venezuela where I live now.

  My video card, started making the noise of the typical fan geforce 9500gs can do. The temperature of the gpu is very high (from 73 ° c without playing or watching videos!), and I'id like to replace it as soon as possible before my material fails completely.

  But the power supply 350w, to replace any video card decent needed to change my diet too. I have not the slightest idea of what type of power supply should I buy, and if I should replace the case too. My intention is to keep my cpu, my mother, my hard drive and my ram (purchase of a new system to the Venezuela is out of the question because of the barbarian prices in this country).

  Then to take the questions in order, I'll here:

  -I want another video card (geforce 9500gs is known for his failure, so I want to upgrade to a more powerful card)

  -To do this, I need another power supply, so I need recommendations on the provision of market models which CORRESPOND to my HP Pavilion Elite m9340f or

  -replace also the case: what kind of business should I need that corresponds to the motherboard of benicia

  Thanks in advance

  Jeronimo Ramos-Prince

  The information below was previously published by Big_Dave in response to several other posters about their questions about GPU upgrades. Prices shown are in U.S. dollars and for American retailers.

  Your PC has a 350 Watt PSU if below video cards will work:

  $50--->NVIDIA GT 430 9.6 Gbps - single slot width

  $65--->NVIDIA GT 520 8 Gbps - single slot width

  $80--->NVIDIA GT 440 25.6 GB/s - single slot width

  $130-->NVIDIA GT 545 43 Gbps - location single width - could be hard to find but perhaps only in the store

  $110-->NVIDIA GT 240 1 GB DDR5. 54.4 GB/s - single slot width. This card does not support DirectX 11 which is eventually used in some of the latest PC games but it's a great performer.

  Review the performance of NVIDIA specifications. Look at the specifications of strip memory bandwidth and level of DirectX support.

  I normally don't recommend video cards AMD for PC with a 350 Watt power supply as AMD provides 400 watts or more for most of its video cards.

  Frank

• HP pavilion elite hpe 083uk graphics card

  Hello
  
  I have a HP Pavilion Elite HPE-083uk with a NVIDIA GeForce GTX260 graphics card (HP part number: HP 579684-001).
  
  The graphics card has stopped working and I am looking for a replacement, but struggling to find one that matches the required configuration, in the same slot and is available in 2014.
  
  Any guidance would be appreciated,
  
  Thank you very much.

  Hello

  Ah - my fault for typing.  Too many 7s.  GV-R726XOX-2GC by Gigabyte  There are a few variants of the same graphics card on this site.

• HP Pavilion Elite HPE-490uk: SDXC card problem

  A 64 GB SDXC card is compatible with the card reader in a HP Pavilion Elite HPE-490uk?

  Lowemj5, welcome to the forum.

  Here are the cards that are supported by the reader:

  Figure: view of the memory card reader

  Supports the following cards:

• HP Pavilion Elite e9160f update video card

  I want to upgrade the video card on my Pavilion Elite e9160f.  I know that he only has that a Psalm 350w at this moment I only have a card... video how 230GT measure can I go in the chain of video card without a new PS?  Thanks for the help!

  Hello

  The NVIDIA GT 240 1 GB DDR5 (if you can find one) or the NVIDIA GT 440 1 GB DDR5 would be a good choice.

  Review the performance of NVIDIA specifications. Look at the specifications of strip memory bandwidth and level of DirectX support.

• ESXi 3.5 does not start after the failure of the card mother SATA port 0.

  I have a DELL PE1800 with ESXi 3.5 U3 Server installed on HD1. The card mother port SATA 0 failed. I bought a new sata, Rosewill RC-218 controller card. Installed and attached hard drives. Configured the BIOS to disable the integrated and restarted sata controller. Now ESXi 3.5 will not start.

  My old configuration has two hd with ESXi 3.5 U3 on disk 1 and my VM on disc 2. Now no drives are seen by ESXi 3.5. Yet see bios of them.

  Todd L.

  Another thing you could try is to install ESXi on a USB key. http://www.yellow-bricks.com/2008/07/29/ESXi-35-update-2-on-a-USB-memory-key/

  Plug your storage space on good sata port. I have an eye for a sata controller from dell PERC 5 can be had quite cheaply on ebay and others.

• Pavilion G7-2110ex: interdace card mother sata type! for experts

  Hello
  I have a pavilion g7-2110ex laptop

  How can I determine the SATA interface on the motherboard type?

  Download Speccy and find disk hard details listed:
  http://www.Piriform.com/Speccy

  Don't worry, they are all compatible which means you can use a SATA 1 drive with a SATA 1/2/3 connection. It will suffer just a little in terms of performance

  Concerning

  Visruth

• HP Pavilion s7210n card mother SATA compatibility

  Hello

  I have a question on a motherboard that is installed in a PC HP PAVILLION of Slimline s7210n, purchased in 2005.

  This is all the part # and other information that I could see on the motherboard:

  PTGV-LM
  N13219
  C58S198-00877-60-MBL3A2-A04

  The original hard drive is SATA 1 (1.5 Gb/s).  I would like to replace the original HDD with a SATA 2 (3 Gb/s) HARD drive.

  The motherboard has 2 entry SATA connections.  The connection that is not used is labeled "SATA 3" on Platinum motherboard.  I think that it is a 'SATA 2' port and model of PCB plate refers to the speed (3 Gb/s) since SATA 3 (6 Gb/s) is only available in 2009.

  This PC was purchased in 2005.

  A SATA 2 HARD drive will work with this motherboard?

  Hello:

  A SATA II HARD drive will work, but only at the speed of 1.5 transfer in this PC.

  That's all the 915 chipset can handle.

  The port numbers are only of numbers, not of speed of the sata drives.

  You plug certain devices into ports with some numbers.

  For example, you would plug the bootable hard drive into port 1, port 2, a DVD in the 3 port high school.

• HP Pavilion Elite M9047C: Upgrade graphics card

  I put upgraded my computer to windows 7 64-bit home premium.  I have just a nvidia geforce gt 610 that does not play well with the computer as it is.   disk failures and crashing.

  I change to power 500 w of power.  put a 250g SSD and a secondary hard drive of 1 terabyte.  I have contributed to a maximum of the ram with 8g.

  Can anyone recommend a card that works better than what I have now?

  Thank you

  PB

  You would be better served by the following: 1) 600W PSU Corsair and 660) 2 of the card EVGA GTX.

  Your GS 8400 original is in the margins of the GT 610.  Not really an upgrade.  Although the GTX 660 declares a min of 450W, your drives additional all add up to the load.  Collectively 'we' usually recommend air power.  This allows the new PSU to run time 1) better and 2) more effectively.

  Now on this OS, good choice.  You will have until 2020, before there is no support.   You will have until the 29/07/2016to upgrade to WIN10, if you want, for free.  I would upgrade the new SSD for WIN 7.  Then clone it on the original HD.  This way you will have WIN 7 on the original hard drive, the system security.

• HP-Pavilion Elite 410y: the video card upgrade

  Can I switch my video of a 6500 R7-200 series card?

  Yes.

  It is snly if you buy a model that has a legacy BIOS compatibility.

  Sapphiretech cards that have inherited the BIOS compatibility and some who have actually a physical switch on the map to allow switching between UEFI and compatibility existing BIOS. See the catalogue following Sapphiretech.

  http://www.sapphiretech.com/productdetial.asp?pid=2339BD93-8F69-4B7C-97FE-769DE2C3BDBF & lang = eng

  

  R7 of the Radeon HD 200 series video cards requires a single PCIe power connector 6 pin. Your office has not been handed over with a power supply that feeds it, then you must also upgrade the PSU. Choose a nice modular unit by a manufacturer as a Corsair. The generator units are highly regarded and reasonably priced

• HP Pavilion Elite HPE-540me: adding an SSD (SATA III) for HP Elite desktop computer. Is this possible?

  Dear Experts...

  I want to upgrade my computer by adding an SSD as a master drive and move the original 2 TB drive to be a slave.

  I found several coices of SSDS, but almost all of them are SATA III interface.

  Is my office supports this interface? as it is just written that it has a SATA interface without specifying what version of SATA!

  How many hard drives could this office holds? I already have two (the original 2 TB and my old drive 256 GB) and I wand to add a SSD for Windows and the progs.

  Can I purchase this SSD for example? Samsung Electronics 840 EVO-series 500 GB 2.5 inch SATA III single-unit Version internal Solid State...

  It is the official my desktop HP specifications page .

  Thanks in advance for your help.

  Hello

  It has 2 bays free HARD disk as on its specifications:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02781215

  You can trade SSDS on your machine and make the old HDD as a secondary drive ("slave"). SATA III is backwards compatible so you can use it. Since then have been smaller SSD (normally 2.5 "), something that is similar to one of the following media:

  http://pccasegear.com/index.php?Main_Page=index&cPath=210_901

  Kind regards.

• Pavilion Elite M9066.sc video card

  Hi all!

  I'm having trouble installing my new GPU (Asus Ati Radeon HD EAH5670). And uninstall my old driver (NVIDIA GeForce 6150SE nforce 430) cards.

  First of all; Windows (win732bit) does not recognize the new card. If the map seems to work fine when it is plugged. I installed the drivers, still nothing.

  The problem with the old driver is; Whenever I uninstall it, it disappeared, but when I restart my pc Windows says he has detected new hardware and installs the driver to return. Even when I uninstalled and then installed the drivers for the new card. He always does. And when there is no video plugged card at all it still found.

  I've tried everything I know to do, I fought with it all day and night... Now, I'm just all out resource. If anyone can help me with this I would appreciate it a lot!

  Turn off the PC and try clearing the CMOS.

  Turn on the PC and go into bios (setup) and make sure that the bios will recognize the new card in the video slot PCI-E x 16.  If the card is not recognized by the bios, then the card is probably not compatible with your motherboard and bios.  I have seen this situation with older PCs and video cards ATI 5xxx.

  There is another possibility. Your PC has a 300 Watt power supply unless you have upgraded.  The ATI 5670 requires a power supply of 400 watt, at least this model VisionTek ATI 5670 requires a 400 Watt power supply.

• Pavilion a6512p power switch wiring / card mother pinset

  Looking for a diagram or pinset for Pavilion a6512p desktop pc.

  A friends PC is DEAD.  Then as he would not pass a person removed the power switch and the switch wiring.

  I try to find why the PC is DEAD.  Good power - LED to a constant.

  Need to go beyond the power switch isssue so need to know how to wire lift PC to power.

  So I can determine if it is the switch power supply or component...

  Any help would be appreciated.

  Should be a diagram somewhere telling me what PIN does what.

  TIA, Gary

  Please use the following scheme;

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation