Card USb continues to stop. Error code 10.

Similar Questions

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I tried to install since 11/12/09 important update KB976098 and continue to get error code 8E5E03FB unknown error. I tried to find the error code, but can't find it. How can I download and install this update?

  I tried to install since 11/12/09 important update KB976098 and continue to get error code 8E5E03FB unknown error.  I tried to find the error code, but can't find it.  How can I download and install this update?

  Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really need not to install this security update not any way so you can hide it just ("don't show me this update"). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected?

  Try to load software PhoneTree and I continue receiving ADODC error code.  What should I do to install the software?  How can ADODC error be corrected?  I have Windows VISTA

  Hello

  Thanks for posting your question in the Microsoft Community.

  From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.

  You did changes to the computer before the show?

  Method 1: I suggest you to run the fixit from the following link:

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot start windows STOP error code: 0x0000C1F5.

  OT: Tent Windows Start, fails, try to restart, and fails again. STOP error code: 0x0000C1F5. Does not start with the DVD of resettlement. Won't do anything.
  Any suggestions?

  Hi Kya,

  You have made no changes to the computer before the broadcast took place?

  You can try the steps from the following links:

  This problem occurs because the Common Log File System (Clfs.sys) driver does not solve the $TxfLog file when the file is corrupted. In addition to the error message Stop Windows Vista may not start during startup until the offending disc is removed from the computer.

  How to get around the Stop error on a Windows Vista-based http://support.microsoft.com/kb/970101 computer 0x0000C1F5

• Satellite A60 USB Driver issue - 28 error code

  I have a laptop satellite A60. I had a crash of the system due to problems of graphics card and had to reinstall windows xp pro etc...

  Now, I unplugged my USB2.0 hub to go sit somewhere else in the House. The day after that when I plugged in the rear hub, it gave an error code 28, saying that the software required to install the device is not found... And the hub does not work. Now, it's the same story with my sm-buscontroller...

  The hub has its own power suplly and I am running Windows XP Pro with SP2.

  Hello

  Code 28 means that no drivers are installed and you need to install the correct drivers.
  Please choose the device (USB hub) and reinstall the driver of this source C:\windows\system32

• Stop error code blue screen: STOP: 0x000000F5

  I am a student and I take 2 of my classes online.  As soon as I decided to take my classes online my computer starts to work again. I can't afford to take it to the cause of Squad of geek I'm behind in my classes. It happened already, blue screens, and I was about to start my classes then instead of he sends to a diagnosis, I thought I could solve the problem by simply installing a new hard drive. If that's what I did. About a week later, I got another blue screen and since I had just put the new hard drive and a warranty, I got and they fixed, does not really enter in what the problem was. Now about a month has passed and the dreaded blue screen is back. This time that I wrote all the error codes and everything I did to try to solve the problem. I guess only through diagnostic tests, and to install a new hard drive was a mistake, given that I spent $260 and the problem is not resolved. In any case, I'm sorry I got carried away with the details, but I'm desperate! Last night, I had the first blue screen and read it.  The usual "a problem has been detected and windows were shut down to prevent damage to your computer.

  Then he said (and this was the first and only time I've seen this message) "run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check, and check memory faulty or incompatible. Try to change your video card. "And then the usual"disable any hardware or drivers and software, etc... Technical information: STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000).  Then, I started it in safe mode w/network, ran windows memory diagnostic tool and it found nothing. Then I tried Microsoft fix google and I change video card. Ending me upgoing in the properties of my video card to find out information about the pilot. Somehow, I ended up on Intel' support and found a newer driver for my video card, so I downloaded it. But then I got the blue screen again. This time it read; "A problem has been detected etc..  FLTMGR_FILE_SYSTEM with Tech Info STOP: 0x000000F5 (0x0000006E, 0x87AD62F8, 0x87AD62C8, 0x00000000). Can you please tell me what is happening so I can solve this problem once and for all! Or should I just invest in a new computer?   Thank you for your time.

  Hello

  Since this has happened material suspect in particular hard drive and anything
  report (such as the motherboard and wiring) - also, malware or same antivirus/anti -.
  spyware/security programs.

  ------------------------------------

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Check also:

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------

  BCCode: 0x0000007f 7F

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  return if necessary troubleshooting services

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  -----------------------------------------------------------------------------------------------------------------------

  BCCode: F5 0x000000F5

  The most common cause of this problem is a problem of hard disk or hardware connected to the drive
  as the mother/controller card and cabling. Other possible causes include antispyware/antivirus/security programs.

  Bug Check 0xF5: FLTMGR_FILE_SYSTEM

  Bug FLTMGR_FILE_SYSTEM control has a value of 0x000000F5. This indicates that a fatal error has occurred in the Filter Manager.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support.
  To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  FLTMGR_FILE_SYSTEM settings

  The following settings are displayed on the blue screen. Parameter 1 indicates the type of violation. The meaning of the other parameters depends on the value of parameter 1.

  See this link for the parameters or the Faultwire link below.
  http://msdn.Microsoft.com/en-us/library/ff560383 (v = VS. 85) .aspx

  Cause

  The cause of the problem is indicated by the value of parameter 1. See the table in the settings section.

  
  Resolution

  If parameter 1 is 0 x 66, you can debug this problem by checking that your minifilter driver recorded a reminder after the operation for this operation. The current operation are in the structure of recall data. (See parameter 2). Use of the ! fltkd.cbd the debugger extension.

  If parameter 1 is 0 x 67, you must verify that you do not have a leak pool unpaginated somewhere in the system.

  If parameter 1 is equal to 0x6A, make sure that your minifilter driver does not refer to this file object (see parameter 2) to get a handle at any time during the processing of your minifilter of this operation.

  If parameter 1 is equal to 0x6B or 0x6C, then a State internal unrecoverable error has occurred causing the operating system bug control.

  If parameter 1 is equal to 0x6D, make sure that your minifilter driver does not call FltReleaseContext too many times the specific context (see parameter 2).

  If parameter 1 is equal to 0x6E, make sure your minifilter driver does not call FltReferenceContext after the context has been removed (see parameter 2).

  BCCode: F5 0x000000F5<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/FLTMGR-file-system-0x000000F5-* 1242.html

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Reinstall the network card, but there is an error code (31)?

  Hi all! This is my first time asking in this forum so please guide me if I make mistakes.

  I use a Dell Inspiron laptop n5110, and recently I had problems with my wireless internet connection. Most of the time at halfway then I am browsing or buffering videos, my internet would simply cut all of a sudden and it goes to show that its connected, but there is not internet access/no access to the network. Sometimes, it just goes to a network not identified without internet access.

  To resolve this problem, I accessed my disabled device manager then activated my network card and the internet reconnected instantly. However, it was not a permanent solution and the same problem has occurred over and over again, sometimes in succession. I called the guy in charge of my internet and I doubt it's a problem on their side, so I thought it would probably be a problem with my network card.

  I uninstalled my network card and reinstalled, but now I can not connect to internet at all. Nothing shows up on my list of connections available now. The only reason why I am able to ask this question is because I'm using my iphone usb hotspot.

  I checked my network card and it shows "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». I hope someone can help me with this. Sorry for the long post as well, I just thought that some of you will want to know what happened before.

  Hello

  Welcome to the Microsoft community!

  I really appreciate your efforts to solve the problem and provide us with the required information that will help us troubleshoot and fix your problem.

  As the error code says, the question arises if the device driver is corrupted and Windows cannot update the drivers for the network card. I suggest you refer to the solution recommended for Code 31 has been provided in the following Knowledge Base article:

  Error codes in the Device Manager in Windows

  In addition, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  According to the error code, I suggest you run the troubleshooter devices & hardware and check if it helps.

  Open the hardware and devices Troubleshooter

  If the problem persists, try the following method.

  Method 2:

  Uninstall and reinstall the network driver from the Dell support site.

  Step 1:

  (a) press the Windows key + R.

  (b) type devmgmt.msc in the run window.

  (c) expand the network adapters in the Device Manager list.

  (d) right click on the concerned device driver and click Uninstall.

  After you have uninstalled the driver, proceed to the next step.

  Step 2:

  Download and install the latest driver from the following link network.

  Drivers Dell Inspiron 15R (N5110, Early 2011)

  Note: Select the Windows 7 as the network and operating system under article of the category.

  Check whether the problem is resolved.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• External USB HDD 320GB 10 error code

  Hi im having trouble with my 320 GB external hard drive I bought about 2 months ago and has worked very well to the top and up to now, where it seems to want a driver who I was not provided with the hard drive because it is plug-and-play and does not connect to my computer just returns the error code 10 on all my computers can someone help me find this driver or help me with this problem out as I noticed many people seem to happen with the 250 GB and 320 GB hard drives at the moment?

  Hello

  You suggested that this drive worked properly.
  One question; have you used the option to remove USB device?

  Sometimes the USB could not recognize the USB device because the device was removed without using this option.

  Maybe this will help: go to Device Manager and remove the USB ports. After restart of the operating system to reinstall the USB ports. Then check if the USB HDD works.

• Satellite L500-21dts - Stop error code during the installation of Windows 7

  Hello

  I bought a laptop Satellite L500-21dts of Saudi Arabia.

  I lost the hd recovery during try windows 7 installation difficulty. If I try to install windows 7, I get the stop error message code 0x0000009c. If I turn sata to AHCI Windows xp sp2, sp3 installed, compitibality but most of the drivers such as display and wlan not installed. To date give BIOS which is not appropriate for the version of phoenix bios 1.5

  I changed the RAM and HD, but the same problem. It may the BIOS?

  Please help me

  Hey Buddy,

  I m a bit confused now... Do you have Windows 7 or Windows XP?

  If you miss some drivers after installing XP, why you update the BIOS?

  As far as I know Satellite L500 is supported by Windows XP if you can download all the missing drivers and tools of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Check this box!

• GPIB-USB-HS not install error code 39

  Trying to install a new GPIB-USB-HS controller on a windows XP SP3 Dell vostro 200 system, I get an error code 39 error (missing or damaged driver). I installed NI488.2 v2.7 and restarted without success. I uninstalled and then installed again (several times) without success. I managed to install the exact same hardware and software on other machines to xp windows successfully. MAX runs, but does not see the material. Any ideas anyone?

  
  

• Blue screen Stop error code 0x000000DA in XP PRO X 64. The driver's mismanagement of system PTEs.

  Seat of Windows XP PRO X 64. After you uninstall old graphics drivers, PC does not long enough to install new graphics drivers and continually, it passes loop BSoD after windows login. I disabled the effect loop so I can display the blue screen message. I read that its actually the file videoprt.sys in service pack 2. don't forget that this is the version 64-bit (located in windows/system32/drivers) who has a bug (ver 5.2.3790.3959). I did some research to get the version 5.2.3790.1830, but I can't download it to replace the current one. Does anyone have a solution for me? Currently, my PC has no graphics driver installed because of this problem.

  The minidump file showed a SYSTEM_PTE_MISUSE (da) stop error referring to the vgapnp.sys (VGA/Super VGA video driver):

  BUCKET_ID: X64_0xDA_vgapnp! VgaStartIO + 226

  The process that crashed was the SteelSeriesEngine.exe:

  Nom_processus: SteelSeriesEngi

  If the SteelSeriesEngine.exe is the process that is constantly crashing and then disable this process to start as there may be a conflict between the SteelSeriesEngine.exe and the vgapnp.sys.

  You could try renaming the SteelSeriesEngine.exe in the directory of the program SteelSeriesEngine to something like SteelSeriesEngine.old

• How can I stop blue screen with stop error code (0x00000002, 0x00000000, 0x804e70ed)

  How can I stop blue screen with error code stop 0 x 00000050 (0xf05c371c, 0 x 0, 00000002 00000000, 0x804e70ed)

  If you are not real tied to the current installation of Windows - then a cloth and then reinstall are the best way to see if you can fix this

  Here's a suggestion on how to do a 'clean ': install
  [quote]
  For testing purposes, it is best to install Windows "clean".
  It is, basically, install the way that Microsoft intended (with the drivers from Windows Update).
  This procedure is for Windows 7, Vista is similar (but has 2 service packs)

  You will need your installation/recovery DVD (s) before you start.  Once you wipe the hard drive, there is no going back!

  1 back up all your data.
  It will wipe everything off of your hard drive, so what you want to keep should be backed up elsewhere.

  NOTE: If this is due to an infection, remember to analyze the data with current antivirus to another system to locate and remove malware.

  2. connect the system to the internet (if the system shows then disconnect from the Internet, do).

  3. use one of these free utilities to wipe the hard drive:
  DBAN ( http://www.dban.org/download )
  KillDisk ( http://www.killdisk.com/downloadfree.htm ).
  This will also remove the system recovery partitions - so the installation/restore DVD is essential!

  4 install Windows by booting from the installation/recovery DVD - DO NOT change any settings!

  5 visit Windows Update and get all updates

  6. check device for all unknown/disabled devices Manager - if there are unknown disabled devices, secure them with the latest drivers from the website of the manufacturer of the device (not the PC manufacturer)

  7 visit Windows Update and download the Service Pack 1 (normally under important updates).  Read these notes for installing SP1: http://support.microsoft.com/kb/2505743

  8 visit Windows Update and get any other available updates

  9 download, install and update a free antivirus, so it does not get infected during the test ( http://www.carrona.org/freeav.html ).

  If problems persist, then the problem is probably with your hardware.

  Warning: If you have an Asus motherboard, check the date on the file C:\Windows\System32\driver\ASACPI.sys.  2004/2005 is a problem, 2009,2010 is OK.  Updates are available on the Web from Asus site.

  Warning: If you have a Sony system, make sure that you do NOT have the 2007 version (or earlier) Extension of Firmware of Sony Analyzer (SFEP.sys).  To update this driver immediately!
  [/ quote]

• I get the IRQL_NOT_LESS_OR_EQUAL STOP error code

  I get the error code IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A, 0x8204083c, 0 x 00000001, 0 x 00000002, 0 x 00000000.  After I try and connect. Safe mode I would like to connect, I tried several restore points system has not worked, laast known good configuration didn't work, scandisk, scan of the hard drive and memory said its ok.  HP technical support said that I have to wipe the drive, but I was wondering if there is a patch on or if it is a known issue. (Laptop HP dv9000 purchased in w canada)

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Deletion of a project in insight source (trial version) that has been mapped to a network drive results in the Stop error code 0 x 00000027

  Deletion of a project in insight source (trial version) that has been mapped to a network drive in clearcase... .the deleted when I got this error...

  Kindly give me a solution...

  Original title: error code 0 x 00000027

  At the error repeated or leave all the undesirable consequences? Unless there is probably not merit to be investigated further.

  Verification of bug code 0x27:
  http://msdn.Microsoft.com/en-us/library/ff557446 (v = vs. 85) .aspx