Carplay works is not on my ios iPhone6 9.2.1 and VW Passat discover Pro 2016 GTE

I tried to do everything to get my iPhone6 work with Carplay on the Discover Pro.

Change of SIM card

Bluetooth on and outside, unpaired etc.

Reset iphone6 via iTunes and configured as a new iPhone

Tried different lightning original apple cables, one provided by Apple support Netherlands

Tried to reset the default settings of appconnect on the Discover Pro

When I connect to an another iPhone6s it works immediately.

tried the same settings of the 6s that does the work, although the iPhone6 does not work with Carplay.

Here is a video of the process demonstrated that it does not work. After all of these options, I tried

http://youtu.be/3ARj7osDfM8

Apple support escalated the issue to support from apple engineers, a week ago, I called 2 times to get an answer, but they are always looking in what they say.

I tried each much option of Carplay fans told me to try, but my ios 9.2.1 iPhone6 does not work with Carplay on the Discover Pro.

and yes the discover pro is the latest firmware running and works like a charm with a 6s by using the original apple cable. But my 6 is not...

waiting on the Apple support...

I had this exact problem with my Passat from 2016. Searched the interwebs and finally found an easy solution. Hold the power button on your radio in the car down for 15 seconds until you see that he has adjusted.  Connect the cables and that is.

Tags: iPhone

Similar Questions

  • USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

    I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

    It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

    Hello

    Method 1:

    I suggest you to run the fixit from the link.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems

    Method 2:

    Step 1:

    In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    Step 2:

    Check if the device is recognized on another computer.

    Hope this information is useful.

  • iMessage works does not after updating iOS 9.2

    My wife has an iPad Mini 4 (Wi - Fi only), and since the iOS installed 9.2 update, she could not use iMessage. It has an Android phone, but use iMessage on his iPad to text me on my iPhone.

    Going to settings > Messages and turn off iMessage worked. We read that a possible fix was to try this, reboot the device and turn iMessage on IT. Well, iMessage cannot be turned on ('switch' is not in the on position). Go to the home screen Messages shows a dialog asking for the activation of FaceTime. She puts his user name and password, and it hangs on. Finally, it returns a message that I don't remember everything now (without the unit in front of me), but something along the lines of FaceTime cannot be enabled at this time. Keep in mind, this is when in the Messages, she has not selected FaceTime.

    If anyone else has experienced this?

    FaceTime & iMessage must be active.

    With the help of iMessage

    http://support.Apple.com/kb/HT3529

    IMessage activation troubleshooting:

    http://support.Apple.com/en-us/HT201422

  • App update work does not after updating IOS 10

    Hi guys,.

    After the update my 6plus iphone to IOS 10 yesterday, I have a problem with the update of the applications on the Itunes store. Updates are not downloaded. IPhones shows it starts the download but nothing happens.

    Tried via 4G and Wifi but no difference.

    Help much appreciated.

    Thank you

    TBirdGarage

    Restart your iPhone, and then try again.

    1. Press and hold the sleep/wake button until the Red slider appears.
    2. Drag the slider to turn off your device completely off.
    3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
  • Engineering of Netgear works do not correctly with iOS 10 or Mac Sierra

    NETGEAR genius App does not recognize that my R7000 on the network once I updated to iOS 10.
    Also on Mac Update for Sierra, the Netgear genius app crashes.
    In both cases, I deleted and reinstalled to correct, however, they continue to fail.

    Thank you all. The app update took care of the problem for me. If all goes well for everyone.

  • switcher app works is not in the ios 9

    I have an iphone running ios 9.3.2 and noticed 6s recently screen switcher app has all the icons (when I take to the left and right) so I need to double-click the home button to view open applications. Can someone help me understand how to solve this problem? I already turned my phone turned off/on and that did nothing.

    Settings > general > searchlight > Suggestions of Siri > switch on

  • The search works is not for Apple iOS music.  Solution is to use SIRI and for example, "find all the albums Paul Simom". My Search stopped working last night, as it has millions of Apple users. Just ask Siri from your home screen.

    Use Siri on home screen.

    Force reboot device (hold button power & home button until the apple logo appears)

  • After the restoration of the computer, he slowed down. Also, defrag won't work does not by saying "this scheduler should run, saying" and cannot remove programs.

    Original title:

    I restored my laptop to the RSD date, then my laptop is slow with loading and entered in safe mode.

    Since I experinced problems with;

    deframent will not run saying that schedular must be running so recessed on schedular and does nothing.

    Tried to remove programs and it is still sitting there, but when asking him to remove his saying they aren't there.

    Tried to run such programs a 3d max, Malware and provides a warning dialog box saying that no endpoint data map would c:\windows\sytem32\ and e:\

    created

    They are also no newspaper, even if it has been a week since the restoration and had the pc 6 months

    I tried to clean my pc AVG saying they are virus-free

    I can not restore I can't even disable the comments, sign in.

    Help, please?

    Hello

    1. why, initially, you restore the computer?

    2. What is the brand and model of the computer?

    To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

    Method 1:

    Perform a clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

    Method 2:

    Run a scan disk to check the hard disk for errors.

    Check a drive for errors

    Important: While performing the check disk on the hard disk, bad sectors are found and if he's trying to repair this area, all available data on the risk of being lost.

    Method 3:

    Check the memory to find errors.

    Diagnosing memory problems on your computer

    See also,

    Ways to improve your computer's performance

  • AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

    AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

    Try these steps, check to see if things work after each step if necessary, before you try the next.

    1. Check AirPlay is on the Apple TV (turn market if it already is)
    2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
    3. Restart the Apple TV (settings > general > restart).
    4. Restart the Apple TV by removing ALL cables for 30 seconds.
    5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
    6. Restart your computer or mobile device.

    If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

    If your problem is AirPlaying starting a computer, try turning off bluetooth

    If you're still having problems, the following article can help you.

    Troubleshooting AirPlay

    Troubleshooting connections and Wi - Fi networks

    Recommended Wi - Fi settings

    WiFi Diagnostic Software (for Mac users)

    You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  • Searching for pictures of iOS 10 works is not as expected

    I have updated to a couple of my iOS devices (iPhone 6 and iPad Air) iOS 10, actually 10.1 public beta 1 now, but find the results obtained in the search of my library of ~ 5000 photos and videos quite modest.

    I very rarely get the images I'm looking for, if any.

    For example, 'find my photos from the Netherlands' Returns none so I have 122 in my library.

    The research of the city of Delft (that is the Netherlands) returns a single result, which, ironically, shows a screen indicating the word "Delft" on a local train.

    I wonder if there is the possibility of re-indexing of the library or the device can be done on a Macintosh, but I'm afraid user ios do not have such a luxury for now.

    In my troubleshooting process I spent from Italian to English, since this might be a reason for poor search results. But things have not changed.

    Of course, if I ask "Find my photos of the mountains" (or dogs by the way) I get decent results this image recognition works though, not much luck with geotags.

    Any idea?

    / P

    Wow!

    The answer to this question of mine has been overwhelming... (I'm kidding)

    In the meantime, FYI Apple has released the iOS 10.0.2 update that solves the problem of geotags.

    I can now find my photos from the low countries (or Switzerland or India also) and get the correct results.

    Nice

    / P

  • WhatsApp works do not on iphone6 9.3.2

    WhatsApp works do not on iphone6 9.3.2

    Pls help me

  • GPS works do not correctly after updating iOS 9.3

    Hi all.

    After the update to iOS 9.3 my GPS can't find my exact position. He always tells me that I am in a large area, (Triangulating) looks like it does not activate the GPS.

    Sometimes very little it works and give me the right position, but 97% of the time its does not work. Someone else with the same problem?

    Besides that: a hot phone & bad WIFI

    iPhone running iOS 9.3 6

    Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

    You won't lose data by resetting, but it can erase some problems after installing new software or applications.

    If this does not work, and to ensure that it is not software related, set it back to factory settings without using a backup later. Test the functionality of your Wifi and GPS.

    In case it works again, restore from backup, if it is not, the problem may be related to material and the phone must be verified by Apple or an Apple authorized service provider.

    Use iTunes to restore your device to factory settings - Support Apple iOS

    Apple iPhone - contact Support - support

  • Why my hotspot does not connect to my iPhone6? I just used it on right Friday night before I downloaded the 9.2 IOS... Anyone having problems?

    Why my personal hotspot does not connect to my iPhone6? I just used it on right Friday night before I downloaded the IOS 9.2 update... Anyone else having problems?

    http://www.application.Update/9.0.2

  • "History & clear Web site data" in Safari does not work on my iPhone 5 ios running 9.1.

    The "clear history and data from the Web site" in Safari does not work on my iPhone 5 ios running 9.1.

    How to determine you are exactly ?  It works fine on my 6s + 9.1 running.

  • 10 - working on notes for iOS

    I use an iPhone 6. I tried to use the option to work in the notes, but it is not at the top of my notes. I tried Googling and it says that the option appears not until I typed something then I have tried but still no option to work. Any suggestions on how to fix this?

    Hi grace9826,

    Please use the Apple Support communities to post your question. New features to invite in the Notes app is a great way to collaborate and share the family and friends of wth notes. If you have problems sending an invitation, you want to ensure that the basic requirements are met for your devices take advantage of this impressive new feature! Please have a quick look at the link and the info below.

    Share your notes

    Add people to a note
    Invite someone to collaborate on a note by E-mail or Messages. Or copy a link to the note and send it to them on its other you like. They can then open your note and start editing, just like that.
    Open the iCloud note you want to share.
    Tap or click.
    Choose how you want to send your invitation.
    On your Mac, click on share.
    You want to know if you are already sharing a note? Search at the top of your note or in the list of notes.

    These steps you'll have to invite and share your notes in no time! Happy writing!

Maybe you are looking for

  • beats automatic m6-1045dx

    I restored my laptop to m6 and I can't find the soft ware of beats auto can help

  • 50L7333DF - no TV available cloud

    Hello dear owners of Toshiba TV! I'm sorry to have to start a new thread, especially so because it is a very common problem I'm afraid.In recent weeks, I can not access Cloud TV. I searched the web and came across your community.I read this comment ,

  • Need to download drivers for IDT Audio - deleted by mistake

    I DELETED AUDIO IDT to DOWNLOAD BEATS AND NOW I HAVE NO SOUND ... HELP PLZmy laptop is hp pavilion m6product no.: B6J10EA #A2N

  • amplification of the strain by using the cDAQ

    Hello I am a newbie in the use of DAQ hardware and hope someone can help out me. I recently bought a cDAQ with the NI 9237 to measure the strains. The strains that I try to measure are very small 1 series micro. A bit of research showed me that I nee

  • Index does not

    I have a PC that has the Index building for 5 weeks, but do not increase the elements. Even I rebuild it, he continues to display 0 indexed element, something seems to be stuck... I check the service Windows search and it is started, I restart to mak