Carry the account root Gateway 4.1.1

Similar Questions

• How to access another library to the user of the account root on mac 10.11

  Hello experts, can you help me please know how to access the library of the user of an account when I am logged in as user root 10.11?

  Open the users folder, and then his home folder, choose go to folder from the Finder menu and provide exactly the library as the path. If you wish, you can put the name of the follow-up folder a / at the beginning of the path instead of double-click this folder.

  (139251)

• What should I do on vCenter vSphere Web Client after you change the host root password?

  Hello

  When we implemented vCenter our Organization, we used a regular password to the account 'root' on each ESXi host.

  So, I installed vCenter and added the hosts on it to manage.

  When I added them, they've asked for the root password power connect.

  Ok. Everything was fine.

  Now, we want to change the password to root for each ESXi host.

  My question is: what should I do to make sure that vCenter will always be able to connect to the ESXi hosts, because the account used to connect the first time change his password?

  My question is: what should I do to make sure that vCenter will always be able to connect to the ESXi hosts, because the account used to connect the first time change his password?

  Nothing, after the host is added to vCenter, a user named vpxuser is created automatically on the ESXi host and vCenter uses this user to connect and manage the host.

• Cannot access the vCSA 5.5 with the local root account

  We are upgrading from 5.0 to 5.5 U2 ESXi. By the checklist, I first upgraded vCSA to 5.5.

  The vCSA 5.5 upgrade gives me connection problems. I can connect to the admin of vSphere GUI (port 5480) and web client (port 9443) using the local account "root". However if I try to access it from an application (IE VUM or Backup Exec) vCSA credentials of the root get rejected (as if I use the username/password wrong name). No idea why? FYI, we are using Active Directory and embedded DB & SSO. I attach a screenshot of the summary page.

  Thank you! :-)

  If it was working earlier and you have changed the domain by default to a good AD/LDAP, you can try with the username "root@localos".

  Concerning

  Girish

• Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to be change

  Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to change.

  Hi Khushboo,

  On the bottom of the page of Adobe, you will see an option to change the region, make sure that you have the United States he and on the purchase page to change your currency to the U.S. dollar as well.

  Let me know if it helps.

  Concerning

  Sarika

• . VMDK copy with the non-root user account

  Hello

  On a machine of ESXi 3.5, I try to copy the files with a non-root account created

  I have same asigned this account non-root Administrator role

  I activated the SSH on the ESXi host

  The virtual machine is turned off

  With the non-root using winscp or plink with cp account I can copy the .log files and .vmx files but no other files

  When I log in to the root account can I copy all the files belonging to the virtual machine.

  Does anyone know what is the reason for this behavior?

  Any help greatly appreciated

  This is a permission problem.

  If you see the permission (for example with ls - l), you will see that only root has rw - for these files.

  You can change the permissions chmod g + rw File_List and add you're your root in Group (add entry in/etc/group).

  André

• Crush the account for new host settings does not work.

  I would be grateful if someone could help me, my email hosting company a supplier has changed, but my two addresses remain the same. Crushing my two POP3 accounts with the new settings of the server does not work. I checked with the new owner that the settings are correct, but they suggest that this problem is probably down to Thunderbird and profiles in a way works and is outside their mission of support. My provider is puzzled, but to be honest I only have a small amount of ability here. I need to keep all of my old emails and their structure files and to get the connection to the new servers host works. Anyone who wants to help?

  Thank you, Simon

  I had the help of my provider to fix this.

  Basically, you cannot overwrite an existing account with new parameters. The answer is to create a new account and edit the old one so it does not carry the same settings of server and user name. Now, I spend all my archives of old emails to the new account, but which is described elsewhere, I think.

• The default root password factory NB100

  Anyone know what the default root password factory for a NB100 with Ubuntu 8.04 installed.

  There is no password for root on Ubuntu, the root account is disabled from direct and interactive logins.

  The first 'ordinary' created user will be in the "admin" group, and so after cutting as a normal user, you can use "sudo" to run commands as root temporarily.

  I hope this helps.

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Palm Pre & Exchange - impossible to validate the account settings

  I tried to get my pre sync with Exchange and make it work properly.  I got a few different error messages along the way, but now I seem to be stuck again.  Here's what I've done so far:

  1. entered my info the new account screen.  Come on an "impossible to validate the account settings" error.  I was using the following information:

  E-mail type: Exchange (EAS)

  Email address: {My Email}

  Incoming mail server: http://{ServerName}/exchange

  Domain: {DomainName}

  User name: {my domain user name}

  Password: {password}

  2A got the 1.0.2 update and the error message I tried again, same.

  3 Configuring SSL on the exchange server and tried https rather than http.  Same error message.

  4A changed username to {domainname} \ {UserName}.  SSL certificate error received.

  5. follow-up to the steps in the forums to install the root certificate.  Now make error "your username or password is not correct". I tried to enter my password several times to check that I wasn't go bad at.

  If I take the domain name on the username back to the incapable person to validate the error of account settings.  Anyone has any ideas on what could cause this problem?

  Hi avsfan273,

  First of all, you defintely should not put the domain\\user before your user name as a field dedicated for it on the meadow. Let's get out the part and focus on the error you get when it is configured in this way. Can you post the exact error message that you receive?

• Problem of the NAC in the virtual tape gateway VPN SSO

  Hello

  I've implemented a NAC solution for remote users. The unit of CASE mode configured in the gateway enVirtual Strip.

  I followed all the steps listed in http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a008074d641.shtml

  Remote users can connect succeffuly using the cisco vpn software and they can ping the SIN, but not the DNS (the ASA offers IP @ but not the DNS I do not know why).

  When I access the NAS, I can download the NAC Agent but VPN SSO is not executed and the Agent asks me to connect using LOCAL DB.

  Any help please,.

  Kind regards

  Larson,

  For VPN SSO work, you must send the accounting package to the CAs. The CASE can in turn send for the ACS if you need accounting also be done on GBA, but for authentication ONLY work, the accountant must reach the CASE.

  HTH,

  Faisal

• How to create a user local administrator with the user root on the CV

  As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.

  Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd.  See the reference section of command of the VCS Administrator's Guide, starting on pg 517.

  If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.

• Trying to assign permissions for the Admin user on the folder root

  I am trying to add a domain user on the permissions of the folder for the folder root in vCenter with administrative permissions.  I can get it to assign permissions for folders under the root, but not at the top of the tree.  See code below.

  #Create a VIAccount object can be used with New-VIPermission, Get-VIPermission, PowerCLI etc.

  Function New-VIAccount ($principal) {}

  $flags = '

  http://System.Reflection.BindingFlags: NonPublic - bor

  http://System.Reflection.BindingFlags: Public - bor

  http://System.Reflection.BindingFlags: DeclaredOnly - bor

  http://System.Reflection.BindingFlags: Instance

  $method = $defaultviserver. GetType(). GetMethods ($flags) |

  where {$_.} Name - eq "VMware.VimAutomation.Types.VIObjectCore.get_Client"}

  $client = $method. Invoke ($global: DefaultVIServer, $null)

  Write-Output"

  (New-Object VMware.VimAutomation.Client20.PermissionManagement.VCUserAccountImpl ')

  (- ArgumentList $principal, "", $client)

  }

  $svcaccount = $domain + "\" + $username

  $account = new-VIAccount "$svcaccount".

  #(Get-dossier-dossier nom) | New-VIPermission-role Admin - main $account - spread: $TRUE # this adds the user to a folder called folder without any problem.

  (Get-file-name of the centres of data-Id file-group-d1) | New-VIPermission-role Admin - main $account - spread: $TRUE # when I try to apply to the root folder I get the following error:

  New-VIPermission: 2009-12-24 14:19:30 new-VIPermission 9C9AB6A7-E395-42D1-B944-516E1BBBCEF2 reference object not set to an instance of an object.

  To... vCenterSettings.ps1:93 tank: 70 + (Get-file-name of centres of data-Id file-group-d1). New-VIPermission < < < < - role Admin-main $account - spread: $TRUE

  I was able to reproduce the problem, which seems to be another bug for the cmdlet New-VIPermission in PowerCLI 4u1 indeed.

  As a workaround, you can call the SetEntityPermissions method directly like that

  $domain = 
  $username = 
  $svcaccount = $domain + "\" + $username
  
  $folder = Get-Folder -Name "Datacenters"
  $authMgr = Get-View AuthorizationManager
  $perm = New-Object VMware.Vim.Permission
  $perm.principal = $svcaccount
  $perm.propagate = $true
  $perm.roleid = ($authMgr.RoleList | where{$_.Name -eq "Admin"}).RoleId
  $authMgr.SetEntityPermissions(($folder | Get-View).MoRef, $perm)
  

• View the account service - permissions in vCenter

  The security guy asked me to check if the service account for view can have anything least Administrator permissions at the root of the hierarchy of vCenter.

  Has anyone tried reducing the rights of the service successfully account?

  We will be dedicated hosts (in a dedicated cluster) for VDI so it's just a case of:

  1 give the account admin permissions at the folder level inventory (models and virtual computers view) where the VMs will go

  2 give the administrative account permissions to the VDI cluster level

  ?

  We do not use composer, which simplifies things a bit.

  I'm going to give it a try today, I'd be interested if someone else has done something similar.

  Thank you

  Chris

  This link contains the permissons necessary to constitute your own role.  You can try to add/remove and see how minimnal you can do before things break.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• How to remove unwanted files from the local root folder of the site?

  Hello

  I work with Dreamweaver CS4 on a Windows PC. I have finished my site but I have a lot of files in my local root folder that I don't want to upload to the server. These unwanted files are for most of the photos that I should not be used in my site. I do not understand how to download the site on the server using ftp and remote folder in Dreamweaver. I suppose that if I move the page html files to the remote folder that my photos will not be associated with these html files automatically. I used a Dreamweaver template during the construction of the site. I wish I had a folder with only the necessary files for the site (all html pages and a folder of images) to upload to the server. Is there an easy way to move all my pages and images associated with a folder or remove all unwanted files in the local root folder? As I see it now, I'll have to go through all my pages and write down each title of the photo and then go back and delete each unwanted file. This seems a lot of your time, so I thought that there must be an easier way, I hope.

  Any help or ideas will be of course very appreciated, thanks, dluthier

  I guess you mean 'work' files, not the images that you use in your Web site.

  If they are not related to all pages of your site, you are free to move by using your computer's file management tools. I can give you specific instructions, if you wish, but the short of it is that you do not keep them in the folder root of your site at all.

  In my way of working, I have a folder for each client that includes:

  • The correspondence of this client folder
  • Folder to 'Work'... the PNG images, etc., or of the images from the client
  • Record the site root

  When I get e-mail, I save the message in the appropriate folder of correspondence, I save the images etc in the folder of 'Work' to the customer and I only save images and other who have already been optimized in the Site folder, keep it as intact as possible.

  Even if the general warning must always use the files Panel to move files around, that applies to files which are linked and form part of the structure of your Site. Moving your files 'work' outside of the structure can be carried out safely in windows explore your PC.

  That said, if you need to download and there are files you want to download, or to move, you can 'hide' the in the files Panel by right-clicking on the file name and choosing 'Cloaking '.... "in the context menu that appears.

  To the point that the image files that are downloaded to the remote site will not 'automatically' be associated with your html files. That is right. Unless you have configured explicitly links or associations between files, images will not associate themselves!

  On the subject of 'automatic' way to do this, you can make a link to check on all of your local site. Window > results > Link Checker will bring up the appropriate window, which will give you the choice: broken links, external links and orphan files (this is the one you want). Use the green triangle tower at the left end of the Link Checker to set your auditor... Current Local Document or a set current site.

  If you want to make a checklist to ensure that you move them all, you can save the report by clicking on the small icon "Floppy" under the Green turn the triangle. Who will be on a file text and make up a dialog that you save the report, which will show the broken links, external links and orphaned files. After you move the files to your heart's content, rerun the link check and confirm that you moved the files you want to move. Make sure that you DON'T move files consciously... do not move the .htaccess files or .cgi files, etc.

  Who will save you from actually having to 'write' file names!

  Z