CARS >; cannot start the DEV database on the second node after clone of PROD
2 node RACExample 1: DEV11
Example 2: DEV12
Database version: 10.2.0.5.0
OS: RHEL 5.5
After clone database, we can only bring to the top of the database on node 1. After the start of the database in the instance DEV11, we cannot raise the database in the instance DEV12. After the start of the database in DEV12, we cannot raise the database pending DEV11.
We receive an error ORA-00600 message.
SQL > startup;
ORACLE instance started.
Total System Global Area 4429185024 bytes
Bytes of size 2102032 fixed
1191185648 variable size bytes
Buffers data 3221225472 bytes
Redo buffers 14671872 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [2], [1523689643],
[], [], [], [], []
We went through the following Notes:
ORA-600 [kccsbck_first] - what to check [157536.1 ID]
Bug 2646914 : ORA-600 [KCCSBCK_FIRST], [2] IF ORACM & ORACLE has BEEN RESTARTED ON a NŒUD
DIAGNOSTIC TEST:
On the failed node, alert.log has a line which reads: "this instance was the first to climb." This is not true. The DB has been mounted on the other node.
Rebound of the proceeding on the other node does not solve our problem.
Ran also, what follows on both nodes, but that didn't help either.
crsctl stop crs
crsctl start crs
Any advice would be appreciated... Thank you!
See if the docs from metalink following can help you. Otherwise, please open SR with Oracle.
1 ORA-600 [kccsbck_first] - what to check [157536.1 ID]
2 commissioning (editing) of 2nd instance RAC fails with ORA-00600 [kccsbck_first] [395156.1 ID]
Thank you
http://swervedba.WordPress.com/
Tags: Database
Similar Questions
-
Original title: My Services do not start automatically
I've implemented all Services on 'Automatic', but when I restart the PC, they do not themselves. This is problematic because of the themes won't start not and my PC theme returning to 'classic '. Does anyone else have this problem, if so please help.
More info, please ask.
Thanks in advance
In fact, the problem persisted due to the fact that:
1 'Windows Cache of police service' was running, so I disabled it.
2. "Windows Presentation Foundation Font Cache 3.0.0.0" also ran, so I disabled too.
After disabling these two services, then by restarting the PC, he was back to normal and show to the it's the best.
For those who need help, these are the instructions.
Click Start, type "run" in the search box and click Run and enter "services.msc" and click ok. Once you've done that are looking for the two services above, located once double click on the first found, and in the drop-down list next to "Startup Type" choose "disabled", and then click on apply and then ok, do this for the second service also. Once that is finished, restart your PC, and I hope that your problems must be solved.
Also, I think that it is better to download the "Free Window Registry Repair" of http://download.cnet.com/Free-Window-Registry-Repair/3000-2086_4-10606555.html.
Install and click on "Full Scan" and after it has completed (this may take a while) click on "Error Correction".
After all this, your computer must be at its best.
I hope this helps someone.
Thanks for all the help.
-
Cannot start the virtual machine after you create snapshop
I found a strange behaviour. I have a Windows 2008 guest that I just copied in my new box ESXi. I am trying to create a snapshot before upgrading the guest to 2012 Windows operating system. The virtual machine has currently no snapshots. Whenever I have create a snapshot, he succeeds, but then I can't start the virtual machine saying that it does not find the vmdk file delta even though I see there in the data store. In order to start the virtual machine, I have to delete the inventory and it readd, but then I lose the snapshot. I also have another computer virtual running Windows 8.1 that does exactly the same thing. How can I create snapshots safely without damaging the virtual machine? I also tried to create the snapshot while the virtual machine has been activated but that makes crashing and then it does not start again, so I have to repeat the process to remove the inventory and it time. Frustrating. See the screenshots, I have attached.
Once these virtual machines have been in Hyper-V in the past and I just convert to VMware format using the StarWind V2V converter.
Yes, for an ESXi host and target you must either select the ESX f.vmdk as format target (growable option is for VMware Workstation), or you must convert the virtual machine once more instead of simply upload the files to an ESXi host.
André
-
Hello
my camera 9380 worked perfect when I bought it.
Then I upgraded OS to v7.0.0.513 to 7.1.0.366-> BBM did not work
So I drove back and re-installed 7.0->
(1) maps: "error at startup net_rim_bb_maps: class 'net.rim.device.api.lbs.maps.ui.ManeuverFiled' not found.
(2) BB App World must be closed
any help?
THX
Hello and welcome to the community!
I'm sorry, but the errors you posted seem somewhat independent... so I need clarification please:
Gbassi wrote:
Then I upgraded OS to v7.0.0.513 to 7.1.0.366-> BBM did not work
Unfortunately, "did not work" is not really diagnosable. What, exactly, have you tried? What, exactly, happened every step of what you tried?
Gbassi wrote:
So I drove back and re-installed 7.0->
(1) maps: "error at startup net_rim_bb_maps: class 'net.rim.device.api.lbs.maps.ui.ManeuverFiled' not found.
(2) BB App World must be closed
I do not see how these two errors are related to the first, you were trying to throw the maps app when it appeared? For the second, which came with the maps app? Or is separate #2 and lies somewhere in the process by using your AppWorld? Complete step by step of what you try, with a full explanation of what is happening at each stage, including the full text of all error messages, is essential to understand your situation and if all goes well to guide. Otherwise, we have to guess...
So I guess. My guess is that, once you upgrade to 7.1, you don't have to perform a few extra steps to ensure that all services were properly enabled on your BB. Here are the steps. I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):
(1) registry HRT
- KB00510 How to register a BlackBerry smartphone with wireless network
- Please wait a 'registration' message reach your Messages application
(2) remove and return Service directories
- KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
- If you do not have access CMIME, continue deleting
- KB02830 Send the directories for the BlackBerry Internet Service
- Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.
(3) restart to take batt
- Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.
I hope that will move things again for you! You can try these few points in your process... either now (on 7.0.0.513) or after you re - try to upgrade to 7.1.0.366.
Good luck!
-
Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL
Hello
I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
, I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
Rgds,
ThiruHave you reviewed these docs?
CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]Thank you
Hussein -
Cannot start the vCenter Server Service
Cannot start the vCenter Server Service. To get this message to control the attached screenshot
2013-09 - 03T 21: 34:18.800 + 05:30 [info 03612 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VMware vCenter with username
2013-09 - 03T 21: 34:18.800 + 05:30 [03612 error 'utilvpxdVdb'] [VpxdVdb::SetDBType]: database error: ODBC error: (IM002) - data [Microsoft] [ODBC Driver Manager] source name not found and no default driver specified
2013-09 - 03T 21: 34:18.800 + 05:30 [03612 "Default" error] error obtaining configuration information from the database
This looks like a problem in the registry for the part of the database or a correctly configured system DSN.
-
PROTECTED 2010 cannot start the Slimline Combo drive
Hello
I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.
A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.
Both computers are running Windows XP 2nd edition.
????
Thank you
Best regards
Anne Mette VossHello
Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
Hmm I think I have an idea.
I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
Reboot the laptop.After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!
Good luck
-
Cannot start the DSC Shared Memory
I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.
I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.
Thank you!
Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...
-
original title: Halo 2 for windows vista
Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer. It will not work in single user either...
Hello
Plase make sure you have the latest version of the GFWL Client installed:
http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx
-
Cannot start the network connection: invalid access to memory location
Hi team,
Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location. Can you help me on this issue?
Thank you
Sangaré
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?
Hi jdmanel,
NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Follow the steps in the article.
You cannot start the Windows Firewall service in Windows XP SP2
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
For reference:
How to manually open ports in Internet Connection Firewall in Windows XP
-
How can I solve unless I need to have this problem to download protection software.
Hi Octavia10,-What version of service pack of Windows XP you are using?Try the methods listed in the given article to resolve this problem:Note: The steps are applicable to the other version of Windows XP as well. -
I cannot start the Windows Firewall, I get an error 0x6D9 code
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.
2. you do not do so in respect of the services? You do it in this way? ...............
Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...
under status, it lies and must say... Has begun
under Type of status, it must be said... Automatic
If it does not say that, right click on Windows Firewall > properties...
in Startup Type, click on the pointer, and then select Auto
to the service status, click Start
Click OK when finished.
-
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
These error messages are a pain in the neck to extract useful information.
I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.
If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.
Realtek and NVIDIA, for example get stuff good free audio driver.
If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period
-
Windows cannot start the firewall service.
Original title: my firewall stopped working and it won't let me turn it back on.
My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?
Hey, bed,.
File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.
Information available at:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Hello I just wonder why Skype changed the Saudi flag from previous version to this new? Why do you get a thick white line not blocking the "no God but allah" at the Saudi Arabia Pavilion?
-
In mail, all mail gets a name where he is sent too
When I sent the mail it goes perfectly, but subsequently, there a different receiver. And it's all all the old emails incoming and sent mail. The real sender cannot be seen more
-
I use my iTunes account successfully (ie download, sync iPad, iPhone, etc) using Windows vista with update iTunes 12.1.3.6 as this forum says. I recently bought a new computer Windows 10 basic and I want to continue to use iTunes on both computers. M
-
I just hung a new Linksys WRT160N router and a Linksys WMP300N Adpater card. Router works fine and adapters see the router. I can connect to the network created by the router wireless. When I try to explore or browsers Fireox both return 'cannot fin
-
Logitech io2 Digital Pen driver for windows7
How can install logitech Io2 pen on windows 7