Cartridge of investigation against comments treatment Infrastructure

Similar Questions

• ink cartridges Dell v505 update are striking against the inside when I plug

  my ink cartridges are striking against the inside when I plug. I unplugged it for about 4 days it started the on print alignment and in the Middle he came on the screen, I was out of ink.  I went and got new replaced ink cartridges and he started to hit against the inside again and again and again.

  Corinne40;

  I'm not the relationship of your question of printer hardware for Microsoft Security Essentials which is an anti-malware application.  You can try searching the Internet for a possible solution, like this one, I came across:

  http://www.FixYa.com/support/t3018280-ink_cartridges_bang_together_when

  Or you can sign on the Dell website and ask what their v505 printer model.  Good luck.

• vCAC 6.0 - shared configuration with separate infrastructure

  Hello

  I've been playing with vCAC 6.0 on my lab environment, and have a few questions related to the configuration shared with separate infrastructure.

  In literature, there is a section that explains the difference between a single and shared tenant configuration and within several tenants, the section explains two different - one configuration with the configuration of the shared infrastructure, and 1 vote against and separate infrastructure on each tenant.

  I was able to install all the components of vCAC 6.0 and have been playing with assignment of permissions tenant Admin and Admin infrastructure (IaaS) on different tenants. I added the end point of vSphere (vCenter) to the default configuration of the tenant (vsphere.local) and created the tissue group. Then I disconnected, navigate to the URL of the other tenant (calling it "Tenant LAB") and connected as an Admin IaaS. What I found was that the IaaS Admin LABORATORY tenant could see and edit the configuration details of the powers/group configured by IaaS Admin tenant default endpoint/fabric point. Surely, the other tenant IaaS Admin shouldn't be able to mess around with the settings made by IaaS Admin in the default tenant?

  I also found that when I added a point to endpoint/fabric group/diploma config for a default tenant (calling it 'Tenant 1') and then Administrator of another tenant IaaS (again, by default, describing it as "tenants 2"), IaaS Admin of the tenant 2 has been able to change the configuration of the group point of termination/references/fabric made by IaaS Admin in 1 tenant. That begs the issue of infrastructure configuration how isolated is between tenants in vCAC. The configuration of the Infrastructure is supposed to be shared like this?

  Thanks in advance

  The behavior you described is the expected behavior of the system. Currently, there are very strong tenant isolation in the catalogue of services, end-user features and business groups. However, infrastructure (endpoint points, groups of tissues, of identifying information) will be shared by tenants. I think a separate infrastructure is more in what the logical configuration of an endpoint, fabric/to be used only by a tenant Group bookings and another point of termination/reservations to be used by another tenant. This should be applied to a configuration at the tissue level, and it is not enforced by the system. Again, isolation would be reached at the end user level / service catalogue, where users of a tenant would be able to use and bookings resourcea configured for their tenants only of requests.

• Autonomous AP Repeater with the customer access to Backhaul SSIDS

  I want to set up an additional access point in my house as a wireless Repeater to extend the range of my wireless network.  I was initially going to use 5 GHz for return traffic radio, but I was wondering if I could use it also for customer traffic.  Rather than create a ssid backhaul, I was just going to use the ssid 'House' that I already use for my clients.  I thought this might give me the good range of 802.11 radio g, when necessary, but the speed of the (40 mhz channel width) 802. 11 has radio when nothing was using the AP reapeater.  I have included the relevant config.
  I was wondering if anyone had any ideas or comments on this?

  name of host root-AP
  !
  Ssid dot11 House
  VLAN 1
  open authentication
  authentication-key wpa version2 management
  MBSSID-guest mode
  infrastructure-ssid
  WPA - psk ascii 7 104D000A061843595F
  !
  SSID dot11 comments
  VLAN 2
  open authentication
  authentication-key wpa version2 management
  MBSSID-guest mode
  WPA - psk ascii 7 234D000A0618435932
  !
  interface Dot11Radio0 (this radio will be home and access comments)
  !
  encryption mode vlan 1 ciphers aes - ccm
  encryption mode vlan 2 ciphers aes - ccm
  !
  SSID home
  SSID comments
  !
  MBSSID
  !
  interface Dot11Radio0.1
  encapsulation dot1Q 1 native
  !
  interface Dot11Radio0.2
  encapsulation dot1Q 2
  !
  Dot11Radio1 interface (radio will be radio backhaul with wireless client access but use the same SSID welcome)
  !
  encryption mode vlan 1 ciphers aes - ccm
  !
  SSID home
  !
  station-role root bridge without wire-customers
  !
  interface Dot11Radio1.1
  encapsulation dot1Q 1 native
  !
  interface FastEthernet0.1
  encapsulation dot1Q 1 native
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2

  hostname Repeater-AP
  !
  dot11 House of ssid (this AP has that the SSID of the home because repeaters does support VLAN)
  VLAN 1
  open authentication
  authentication-key wpa version2 management
  Comments-mode
  infrastructure-ssid
  WPA - psk ascii 7 104D000A061843595F
  !
  interface Dot11Radio0 (this radio is used for client access to hospitality SSID)
  !
  encryption mode vlan 1 ciphers aes - ccm
  !
  SSID home
  !
  !
  interface Dot11Radio0.1
  encapsulation dot1Q 1 native
  !
  interface Dot11Radio1 (this radio is the radio of backhaul Repeater)
  !
  encryption mode vlan 1 ciphers aes - ccm
  !
  SSID home
  !
  repeater station-role
  !
  interface Dot11Radio1.1
  encapsulation dot1Q 1 native

  Thank you to advise that you have.

  Yes, that should work, give it a try & see.

  If you plan to use multiple SSID then Repeater solution may not work (because it doesn't support vlan native), so best solution to bridge wireless during the rehearsal.

  HTH

  Rasika

  Pls note all useful responses *.

• 1141 AP SSIDL does not show other SSID

  I have configured our Ap 1141 with two ssid. One is the ssid of comments and the other is marked for advertising in the SSIDl IE.  I see that the guest in the broadcast mode ssid.  I can connect at once if I manually configure the client to connect to the mode ssid uninvited.  IM wondering if my understanding of the advertising order SSIDL is incorrect or if I missed something.

  My goal is to get boath SSID broadcast without having to put on the VLANS separated, because I don't want to configure trunking and routing for virtual local area networks has released a second ssid.

  Another possibility, if the only way to get multiple SSID broadcast is to allow mbssid and configure the VLAN, then it would be possible to get the routing inter access point vlan or have any traffic leaving the ap unidentified? Still, I don't want to have to configure the router to route the VLANS and switches.

  config is

  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname CiscoAP1
  !
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authorization exec default local
  !
  AAA - the id of the joint session
  !
  !
  dot11 syslog
  !
  dot11 ssid new AccuAccess
  open authentication
  authentication-key wpa version2 management
  WPA - psk ascii 7
  announcement information item ssidl
  !
  dot11 ssid Hub 100 new
  open authentication
  authentication-key wpa version2 management
  Comments-mode
  infrastructure ssid in option
  WPA - psk ascii 7
  ssidl information item
  !
  online negotiation power injector 4055.39f2.1203
  !
  Crypto pki trustpoint TP-self-signed-972165635
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 972165635
  revocation checking no
  rsakeypair TP-self-signed-972165635
  !
  !
  TP-self-signed-972165635 crypto pki certificate chain
  certificate self-signed 01
  OMIS
  quit smoking
  user name admin secret of privilege 15 5
  !
  !
  Bridge IRB
  !
  !
  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  encryption ciphers aes - ccm mode
  !
  SSID AccuAccess new
  !
  New SSID Hub 100
  !
  gain of antenna 0
  local food 17
  power client 17
  2412 2437 2462 less congested channel
  root of station-role
  Bridge-Group 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface GigabitEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  No keepalive
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface BVI1
  IP 172.16.20.95 255.255.255.0
  no ip route cache
  !
  default IP gateway - 172.16.20.1
  no ip address of the http server
  aaa IP http authentication
  IP http secure server
  IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
  1 channel ip bridge
  !
  !
  !
  Line con 0
  line vty 0 4
  entry ssh transport
  output transport ssh
  !
  end

  Key hashes removed to avoid the Rainbow table research.

  Thanks for your help and let me know if my goals aren't clear

  Nick

  Hi Nicolas,.

  Please mark this question as "Answered" If you have received the correct information.

  Thank you

  Vinay

• PSC photosmart 2510: general operation of this OLD printer

  the printer sticks in the 'start' engine & looks like the transport of the cartridge is KNOCKING against the end of the line forever.  I did a "reset" I found on the internet before. However, I can't find the directions again.  How do RESET you the printer.

  HI - try after step 6 in the present document.  It provides instructions on the conduct of a reset:

  http://support.HP.com/us-en/document/c00054450

  Hope that helps.

• How to migrate to Cluster SQL in SQL virtual server or Virtual Cluster SQL

  Hi all

  Currently we will attempt to migrate a SQL (2 systems) cluster in virtual environment.  We followed the requirements with the Consolidation of Vmware tool and IO meter to ensure that our guests have enough resources to accomidate this.  All the coming of metrics return looks like it will work very well virtulized that the cluster was just for purposes of failover in any case and not for purproses performance.  That said, a few questions have concocted.

  (1.) that is - that the best way to virtulize or convert (P2V)

  -Should we just create a new Virtual Machine and install the same version of SQL and do a manual migration to the new SQL Server and leave as 1 SQL server with the HA

  - Or is there a way to P2V this kind of a Setup? If so what are the steps?

  2.) If a P2V is possible, I was under the impression you will need to use a mapping of RAW for hard drives otherwise that the cluster does not work?  Can someone talk about this? as I'm sure I've clustered windows Server2008 without mapping RAW before, but not with SQL

  I had to convert several clusters of SQL in VMs. Unfortunately, it is not possible to do a P2V on a cluster node. At least is not that I have ever found. It ends up being a new generation. This can be a major problem; However, it can be a blessing because it could allow a fresh server.

  Looking to take a physical cluster and a new VM cluster? In our environment, we used clustering to protect against the failure of the server. With HA, the problem goes away. So we actually converted all of our non-clustered VMS clusters. Your host dies, it has automatically restarted on another host. It does not protect against comments software problems, but this is not what we were clustering. Do you really need to come together in a virtual machine? Something to consider.

  Brian

• 5.8.1 infrastructure cartridge - create rule for 'availablePagingSpace '?

  I have a number of AIX systems monitored by using the cartridge of the Infrastructure.  I copied and modified the rules for the CPU, the ability to file systems and memory.

  I need to create a rule to alert on 'availablePagingSpace' that appears on the chart "Memory usage" when I click on the "Paging Space" graph via the Host Monitor dashboard.

  I'm assuming that I could copy the rule "Utilziation memory" and likely the condition to test insteead 'availablePagingSpace' of the 'use '.   This seems to be a false assumption.  When you use the rule condition query interface, these are the errors I get.

  com.quest.nitro.service.sl.interfaces.scripting.ScriptingException: com.quest.nitro.service.sl.interfaces.scripting.ScriptMalformedQueryException: bad request: java.lang.IllegalArgumentException: Type ' foglight - 5:Memory:8' doesn't have a property with the name "availablePagingSpace" - start of the script - #availablePagingSpace #.< 100="" ----="" script="" end="">

  I tried to change the rule definition to use different topologies, such as "ICAGENT", but I can't seem to find this property available anywhere.

  I'm still a bit of a newbie to the rule editing Foglight, so bear with me.  If someone has a pointer in the right direction for me on how to access the "availablePagingSpace" metric, so I can use in my terms of rule, I would be very grateful.

  Thank you!

  GWL-

  Hello

  Please try this on a local Foglight Server first.

  When you look at the gauge for swap space available in the dashboard you can see that it is actually taken from the host itself

  

  If the scope of the rule should be the host itself, not memory.

  The easiest way is to seek a similar rule with the host as the scope.

  If you copy the rule run the length of queue for example, you can see that the scope of the rule is host.
  You can then change the rule condition to and when you use the condition Editor, you can see the metric of availablepagingspace as part of the host

  

  I hope this helps...

  Golan

• Determine which drive is alert (infrastructure cartridge)

  Hello

  We use the cartridge of the Infrastructure to draw attention to the capability file Foglight. For the moment is the alert that we see:

  WARNING: SERVERNAME: disk high capacity use 91.00%

  Reported to Jan 01 00:00:00 BST 2012

  What we would like to add to this alert, it is which drive is causing the alert.

  Is this possible?

  Thanks in advance

  Hi Ewan,

  Yes, it is possible. The ability to file rule should probably include the disc name in the alert message as it does in the dashboard of the alarms and the alarm detail view.

  But since it isn't in the current version, you can easily make changes to include this information.

  Since he is an out-of-the-box rule, the best practice is to copy this rule, use a naming convention in the copied rule and modifed and disable the out-of-the-box rule.

  You can make these changes from the dashboard of the rule management.

  Once you have copied the file system of the cartridge of the Infrastructure capacity rule and disabled the original, modify the copied rule and add the Variable rule "diskName" as shown in this screenshot.

  

  Then go to the caution of the rule condition and change the 'Matière2' variable in the Variables of severity level to include '@diskName ':

  

  Repeat this process for the other severities of rule and you should be good to go.

  When I tested this change, I got an alarm like this message:

  From: [email protected] [mailto:[email protected]] Sent: Thursday, October 04, 2012 10:14 AMTo: Brian WheeldonSubject: agent99 : Warning: High Disk Capacity Utilization on /agent991 (/dev/vg00/lvol4): 90.93%
  
  Warning: agent99 : High Disk Capacity Utilization 90.93% Reported at Thu Oct 04 10:14:19 EDT 2012. Please use the following URL to obtain alarm details. http://myfmshost:8080/console/task/showAlarm?alarmId=/alarms/9aa60450-37f4-48b1-81fa-cfddc5a9d609
  

  Kind regards

  Brian Wheeldon

• Cartridge infrastructure 5.6.3 - edition host agent properties

  For the Infrastructure Windows host agent, edit the properties of "change the private properties from this agent" ,

  changes that occur to all the Agents of the host.

  Is this a normal behavior of cartridge of the Infrastructure?

  David's right.

  If you want to specialize a secondary list to a specific host agent, you can clone an existing list and customize the list cloned for this agent.

  Kind regards

  Brian Wheeldon

• Investigation of HP Photosmart 7525 on ink cartridge printer

  We just bought a printer HP Photosmart 7525. If the color ink cartridges are empty, will always print in black and white?

  Hello

  No, normally, it stops during the reheating process. I did a test run last year, we can force it to print black ink only, BUT the success rate was 30% and it printed very slow, I called snail baby.

  Kind regards.

• Foglight 5.6.2 Infrastructure Management cartridge - OS

  Of the CartridgeForInfrastructure_Guide.pdf p. 12

  "Monitoring of remote hosts.

  Unlike the previous generation of the system, agents of Infrastructure can be put in place to monitor

  the remote host. A single Agent Foglight handler can host many Infrastructure, remote agents

  monitoring of the different hosts. Agents of the Infrastructure can still be used locally in situations where

  remote control is not possible. »

  The above statement is the Guide and says '' a single Agent Foglight handler may accommodate many agents Infrastructure, remote monitoring of different guests. ''

  What is 'a lot' here? What is the host number that can be configured by fglam? How is it has no number given in the guide so that customer is aware of how to create and deploy the host by fglam.

  Thank you

  #AJ

  Hi AJ,.

  The number of hosts that can be remotely monitored by a FglAM is a moving target and tha response mainly depends on the resources (CPU, memory, network) which are available to the FglAM.

  Current best practices are to control a maximum of 256 hosts remotely with a FglAM.

  We tested FglAM with many more, but we see memory usage begins to increase nonlinear right here.

  Kind regards

  Brian Wheeldon

• Infrastructure - rule files system capacity cartridge

  How can I include the name of file system as part of the capacity of the file system alert? Currently, it provides only an http link in e-mail alert notification. Pager/mobile phone link is not very useful.

  Hello Michael,

  The name of file system can be fired from the type of topology of logical disks for objects defined by using the following code;

  Scope.get ("Name")

  or if you prefer:

  Scope.get ("longName")

  You can place this code in a variable of severity level for a scope rule for logical disks and then refer to the variable in the message e-mail or alarm.

  -Troy

• The ISE comments and update of Broswer Security Portal

  Hi, last week our assistance service received a constant steam of calls regarding our wireless of comments.  For most people, the problem is that there are browser will not allow them on the portal.  After a bit of investigation, we have established that what happens on devices with the latest browsers - IE11, Firefox 39 + and Chrome.

  OS x and iOS devices and those devices with older browsers are working ok.

  We run ISE 1.1.3.124 which is a certain number of revisions behind so I assume it is the question that 'ignore' safety standards in these new browsers.

  My plan is to upgrade to version 1.2, and then to 1.3 which I had planned to do next month anyway, but I just wanted to see if there is a work around on the ISE, which can be implemented so that the upgrade is made a thoughtful and not rushed.

  Thank you.

  This problem is apparent on several Cisco - ISE and at least first Infrastructure products.

  A couple of threads to discuss and provide workarounds:

  Thread 1

  Thread 2

  ISE 1.3 (or 1.4) will fix it. In addition, ISE 1.2.1 Patch 7.

  Here's the official Cisco ISE Bug ID.

• Cannot comment on or like on Facebook using an older version of Firefox.

  Whenever I try to like something on facebook, nothing happens, and when I try to comment, if I write more than the small chatbar existing, it will not scroll to allow me to see what I'm typing. When I type entered for the comment, it does nothing.

  I'm afraid that Facebook does not work for me because of my old firefox version (3.6.28), but I can not upgrade to a newer version because of the age of my computer (OSX 10.4.11), and I'm not able to get a new computer right now, so I'd like to see if I can find a solution.)

  I tried to clear my cookies and cache, I checked my plugins for problems, including "Effective Community measure Plugin 3.1.0 (by effective measure Pty Ltd)" mentioned in another thread (it wasn't) and people with disabilities those he listed as being known to cause problems. I checked to make sure that my JavaScript is updated and activated. I tried to disable all add-ons and some possible combinations, some turned off. I tried adding a cookie for Facebook authorization. So far, none of these fixes have been effective. I could not try the troubleshooting mode safe, as the ability to run mode without failure is not listed in the drop-down Help menu.

  I have not tried that someone knows the problem, or my browser is all just too outdated?

  I don't know what are the versions of Firefox, they test against Facebook. It is certainly possible that some of the scripts have been updated so far that they have become incompatible. Might need to ask this question to Facebook.

  However, first of all, you are testing in a clean profile. This work around your accumulated customizations and extensions and will give a more true answer "is the problem version 3.6? A new profile will also be fresh data bases of completely fresh settings and a cache folder.

  Exit Firefox and starts in the Profile Manager, as described in the management profiles. Any time that you want to switch between profiles, exit Firefox and return to this dialog box.

  Any difference in the works of FB? If the problems are resolved in a clean profile, you could experiment with the settings module and see if this could be a problem.