Catalyst Control Center will not be open, with the error

Similar Questions

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Kb2481109 will not download - fails with the error code 0X8007FOF4,.

  I am running W XP, this is a kind of XP update, and it will not download.  In addition, Google Chrome is not recognizing that I'm running on XP.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site
  http://support.Microsoft.com/kb/958051

  and/or

  The problem is usually caused by an infection of malicious software on your computer. To prevent the computer to become unstable, Windows will not install the update.

  For Google Chrome: http://productforums.google.com/forum/#! forum/chrome

• Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

  Original title: error message

  Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

  Hello

  Update the driver may solve the problem. See the following article to install/update the drivers.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

  http://support.AMD.com/us/gpudownload/pages/index.aspx

• Catalyst Control Center does not work after update win8.1

  My computer model mobile no is 017tx - Hp pavillion 15th,after update of victory 8 to win 8.1, Catalyst Control Center does not work. So I'm unable to move from the graphics options.

  Hello

  Try this uninatall current display AMD drivers and install the one from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124003-1&cc=us&DLC=en&LC=en&OS=4158&product=5389906&sw_lang=

  For other drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5389906#n402

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Error code 204 trying to download CC on new laptop (2nd computer) it will not download and receive the error code 204. I tried turn off anti-virus and firewall and get the same error code. How do we install CC?

  Please ignore. I disabled the anti-malware and the app is trying to install.

  Thank you

• HIS 5770 + AMD catalyst Control Center does not load.

  For Christmas, I got 2 5770 ITS graphics cards, incredibly excited when I was driving back to the college to put both and start playing games, I prepared the diskette and waited for it to load. Then I clicked on the button "Install Drivers", asking me if I want to English, I accept and click Next. He then tried to open the "Catalyst Control Center", which does not immediately and closed. This happens with all the drivers that I try to ati and sound. IM downloading the 64-bit versions of sence you know I have windows 7 professional 64 bit. idk what to do and need help on this, id like to get these working in the crossfire and let it roll.

  Thank you.

  Intel DX58SO motherboard

  Intel Core i7 920 to 2.7 ghz

  6gbs of ram ddr 3

  1 TB harddrive

  hd5770 2 current is SOUND

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!

• HP Pavilion TX 2136 G6: "AMD Catalyst Control Center" does not

  "Advanced Micro Devices, Inc. - Display - Radeon (TM) HD 7670 M

  "Download size: 106.4 MB.

  After that this updated AMD catalyst controller stops working and apps like Youcam and will not launch games.

  Please help me with this problem.

  Thanks in advance

  Prai

  Hello;

  Let me welcome you on the HP forums!

  I read your post about the problem of Catalyst Control Center and wanted to help.

  Is this an update of driver that has been installed by HP Support Assistant?

  Or (more likely) you go to AMD and download yourself?

  Because if the latter, which was a big mistake!  Laptops come with specialized equipment for which the drivers are delivered only by OEM - in this case, HP.

  What you need to do is the following:

  (1) download and run this utility AMD to remove AMD drivers you installed: utility uninstall own AMD

  2) go to this HP Product Page and download the AMD drivers and install THOSE: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-Notebook-PC-series/5262606/model/5293908

  After that, you should be OK.

  And stay away from downloading drivers from the Internet for your laptop.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Catalyst Control Center does not (hp pavilion dv6)

  I downloaded Catalyst Control Center several times, but it still does not. I have Paviliion dv6-6120se, AMD radeon hd 6490M and integrated intel GPU hd 3000 the two GPU works well but the problem started when I uninstalled the Catalyst Control Center to obtain a new update site Web of AMD. But the site says my version of the radeon hd 6490 M AMD does not support in any way I tried everything I uninstalled the driver of ATI GPU and install again. Somehow, I downloaded Catalyst Control Center and the installation is complete and the same problem, it's still not working. Please any help would be appreciated. Now, I've lost the Catalyst Control Center and the switchable graphics config. help please.

  Hello

  As you have switchable graphics, you will need to download and install the driver of HP - it is on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• WARNING: The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated. If you please update your ATI graphics driver or enable your ATI card using the display manager.

  Original title:  Install the new NVIDIA GeForce GT 240 graphics card but now gets error message regarding the necessary to the old card drivers ATI Radeon.

  I just bought a new computer from AMD PHenom II quad core Dell Inspiron with Windows 7 installed. For the graphics card, an ATI RAdeon 4200 on it there but I wanted a more powerful card and installed a NVIDIA GeForce GT 240 graphics card. The ATI Radeon is not delete because honestly, I could not recognize what it should look like and thought that maybe it was incorporated. The fine installed NVIDIA card and now shows as the graphics card used by the computer Information System.

  My problem is that whenever I start my computer, I get an error message saying that the drivers for the ATI card are not compatible with the Catalyst Control Center. I think I need to disable the ATI card, but don't know how. Can you help me?

  Dell Inspiron 570 is a desktop computer, the ATI Radeon 4200 is an integrated graphics card chipset usually equipped with laptops. Something is not here.

  Go to dell support, enter your tag # and get the origonal system specifications.

  You can uninstall anything about ATI through Add/Remove dialog

• Catalyst Control Center does not (HP 2000-2d62SR)

  Hello and sorry for the bad English.

  I tried to switch between GPUS for instructions, I found this site, but CCC, I have no option (it was a the most recent drivers for the AMD site).  Then I tried to install the drivers from the HP site for my laptop, it worked properly and I could even spend the GPU for a match, but after restart CCC went down and I can not open.  It's just a message as "ccc stop working.

  I have no idea of what to do, now I'll try to remove the HP drivers and install the latest drivers from AMD, but I think that is not a solution and it won't work.

  I think I have foind a solution, but it's looking like magik or somethink like that.

  CCC with switchable graphick will only work if battary is plaged in. I don't know why, but I think that it is a windows default for battary and perfomance application - it is not properly worked with the energy plan. You must fix this.

• My windows live Movie Maker has an ER code 0 x 80004005, cannot display viedo of camer after down load, that its there just will not be open for the show.

  After down loading the camera viedo, it will not be open for show, but it's there, ER (0x80004005) it says Director windows live how I do to reboot?

  Have a look at the last 3 letters of the video you've imported to Windows Live Movie maker (WLMM).
  That the last 3 letters represent the format of the video file. If the format is NOT supported by WLMM, he won't play it.

  Here are the formats supported by WLMM:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If your video file format is not on the list above, google for a FREE video converter and it allows to convert your video file.
  The best format to convert is WMV. The most reliable and foo-proof format.

  PS, It might be better if you posted in the section photos and videos:
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I can't turn on my firewall. My Security Center will not display informfation on the firewall

  We had malware on the computer, but deleted. Since this incident, I was unable to turn on the firewall and Security Center does not have information on the firewall. I've deleted and reinstalled security essesntials but it has no effect on the problem

  Hello
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2
   
  http://support.Microsoft.com/kb/914230
   
  Method 2
   
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us?EntryPoint=lightbox
   
  See also,
   
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
   
  http://support.Microsoft.com/kb/283673
   
  How to recover from an infection of computer virus and how to prevent future infections from computer viruses in Windows operating systems
   
  http://support.Microsoft.com/kb/940831
   
  I hope this helps.

• Windows 8 will not start even with the CD after uninstalling Linux

  Hi, I am currently faced with problems with my Dell Inspiron with Windows 8 3520 is installed. I had been dual-boot it with Linux Mint for a while with no problems until I decided to go completely back using Windows for convenience.  As I had installed Linux by creating a partition I followed online guides to remove the partition on which it was found, and expand the partition holds Windows to its original size. This seemed to go off without incident, until I tried to delete Grub and got to the start of the back straight to Windows computer. I followed a couple of different guides without result and finally ran a program called Boot Repair that just make things worse. After you run the program, my computer began to start directly on a screen of recovery with the error message:

  Boot your pc configuration data is missing or contains errors
  File: \EFI\Microsoft\Boot\BCD
  Error code = 0xc000000f

  After that happened, I called Dell and pushed them to send a disk of Windows 8 for me, so I could try a clean reinstall, I thought I'll fix it. Unfortunately it allows me to boot the disk. Everytime I try (when entering the BIOS and selecting the CD drive to boot from the disc) I get a message saying missing operating system, along with various things I can provide if required, and ending in asking me to insert the bootable media in the selected drive, press which just repeated the same message again. I ' v read on various fixes online without result, most who ask me to change the CD in first priority which I can't do is not listed as an option in the menu accessed by pressing F2 BIOS. I tried to add my CD drive option, but when I click in it, instead of getting the readers of CD or something like that, I get a menu called select Media Driver with options like this:

  WDC WD10JPVT-75A1YTP - Partition 1

  the only difference between them being the partition to which they are assigned, 1, 2, 4, 5 and 6. If I press on enter on any of this that it brings me to another menu called select media with a variety of different options, which change depending on the partition that I chose, which none means nothing to me. I don't know enough to try anything more, and even people at Dell seem to be at a loss. Any help would be much appreciated because I am completely lost at this point and this is my first laptop.

  Hello

  I'm not 100% sure the disks that you actually... The drive set to restore your computer to the factory should be at least 2 or 3 DVD...

  You can reinstall windows only... which, I imagine, would solve the immediate problem.

  Delete the partition with your old windows 8 on this... Don't you say that you developed it in the first partition or something... There may be a small 300 MB partition as the first and possibly a 30 GB or more, depending on the order in which Dell installed their...

  Go by your memory as to the size of the partition that you expanded 8 Win...

  The thing with reinstalling windows just is that you do not have a Dell preinstalled stuff.

  Then you would not be able to do a full restore to factory...

  Manufacturers have made significant changes as to how it's done with Win 8... as there are now several types of Bios...

  You really can't find worse off than you are now.