Caveat when using Mobile Server Java Api Java

Similar Questions

• iPhone 5 battery runs very quickly when using mobile data

  When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

  iOS: version 9.0.2

  See the following article:

  https://www.Apple.com/support/iPhone5-battery/

  In addition, download the app from the battery life and see what it says about the health of your battery.

• REF InsertedVI of high school still not valid when using VI Server

  I'm trying to access subpanel controls (in an executable file) via the server of VI, but he doesn't seem to be allowing me to get a valid reference to the inserted VI (1026: VI reference is invalid).  If I use the same code in the executable itself, it works fine.

  The executable file and the VI that I use to try to get a reference to the Secondary VI is attached.

  Any ideas why this happens?

  OK, I see the problem, VI references are local to the instance of LabVIEW that generate them. When you read the VI reference, you get the correct numeric value (as evidenced by the fact that it is zero). However, in the development environment from which you access the executable, the reference is not valid. This reference is only valid in the environment of the executable. What you need to do in the executable is to get the name of the VI in high school, when you insert it and store that name in a FGV. Then from your remote application, read this FGV - and you will have the name of VI.

  Mike...

• Cannot display all of the databases in SQL Server 2012 when using CONTROL SERVER permission on user

  Hello

  I'm testing the implementation of a user who has the CONTROL SERVER permission.

  I created a database MYDB with my sysadmn account.

  I have the connection with another say TESTUSER user account (this is a SQL login) who received the CONTROL SERVER permission only.

  The TESTUSER can see the MYDB database in SSMS.

  The TESTUSER Gets a message when you try to view the tables in the MYDB pressing the sign +. :

  "The MYDB database is not accessible.

  If I try to do a right-click on the MYDB database, I get the following:

  'User has not authorized to perform this action... ". Error 297 "

  Even if I GRANT the ALTER ANY DATABASE the TESUSER permission TESTUSER still gets this error?

  I thought that CONTROL SERVER permission would allow a user to see all databases even those that the user does not have?

  So does the same for the ALTER ANY DATABASE permission?

  Is this a bug or am I missing something?

  Thank you

  DOM

  DOM

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Patching vCenter when Using SQL Server Express

  Hello

  I have a few questions about the correction of vCenter and will use the installation of vCenter Server 4.0 Patch1 as my reference for these issues...

  I use the tech note at http://www.badkey.com/DB/blogsphere.nsf/2/JWIE-7VDPKJ/ $File/PTech_note_vCenter_Server_4.0_Patch1.pdf the process document. This seems to be an official document from VMware, but I can't find anywhere on the VMware Web site. What is the correct process? It is on the VMware web site?

  Backup of the database - the tech note above does not have reference to smaller facilities that run SQL Express. Are there specifications compared to this type of installation? If I upgrade, I think he should see the 'old' database immediately, correct? If I do not use the backup for a reason, is there traps to do this up to-and-operational?

  Thank you

  number1vspherefan.

  If you point the existing of the current DB Server vCenter DSN, and then you perform the upgrade.

  Otherwise, you perform a new installation or an upgrade of old data.

  You can see the list of the DSN in your ODBC Manager.

  André

• IDLK Temp files when using the server

  In ID CS4 would create a temp starting with a tilde (~) file. I am testing CS5 before deployment to 100 users, and it seems that it is now create temporary files with a backslash and a tilde (/ ~).

  Fine on desktop, but off IT dept' manages the server PC with ZIP extreme to make them accessible. The server does not allow files with a backslash (\) in their. ID won't even open a file?

  Someone at - it similar problems? Can I change the way ID creates lock files? Or I need new servers?

  Cheer

  Mark

  (The last of them was not really an option ;-)

  What operating system do you use? On my .idlk Windows system files, which are files of lock and appear in the same folder as the .innd file that they are locking, always start with a ~. Recovering files is stored in the directory of recovery, have no extension file on my system and start with DBTmp or DBSharing.

• JavaScript error when using ExternalInterface.addCallback("IsStatic",IsStatic) with cross-domain swf file

  How can I use ExternalInterface.addCallback("IsStatic",IsStatic) when using javascript server access (html) of server B (swf)? coz it showing error?
  
  Server A
  192.168.0.10/xxx/example.html
  ===========
  < object classid = "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
  ID = "MGSInsurances1" width = "960" height = "600".
  codebase =" http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab" > "
  "" < param name = "movie" value = " http://192.168.0.22/MGS/flex/MGSInsurances1.swf" / >
  < param name = "quality" value = "high" / >
  < param name = "bgcolor" value = "#869ca 7" / >
  < param name = "allowScriptAccess" value = "always" / >
  "" < embed src = " http://192.168.0.22/MGS/flex/MGSInsurances1.swf" quality = "high" bgcolor = "# ca 869, 7.
  width = "960" height = "600" name = "MGSInsurances1" align = "middle".
  play = "true".
  Loop = "false".
  quality = "high".
  allowScriptAccess = "always".
  Type = "application/x-shockwave-flash".
  pluginspage =" http://www.adobe.com/go/getflashplayer_fr" > "
  < / embed >
  < / object >
  < script language = "javascript" >
  window. MGSInsurances1 = document.getElementById('MGSInsurances1');
  < /script >
  
  Server B
  192.168.0.22/mgs/Flex/MGSInsurances1.swf
  ==================
  
  Security.allowDomain("*");
  
  If (ExternalInterface.available)
  {
  ExternalInterface.addCallback("IsStatic",IsStatic) ("onchange", onchange);
  ExternalInterface.addCallback("IsStatic",IsStatic) ("datachange", datachange);
  }
  
  but javascript Error shows "Unknown name", how can I solve this problem? urgent! Anyone know this?

  I solved it! because I did not restart my server again! Again not error! Sorry to annoy everyone.

• error: "cannot find symbol" when you use String.getBytes (java.nio.charset.Charset)

  I have a very simple java class that uses String.getBytes (java.nio.charset.Charset). When I use loadjava, I get the error: "cannot find symbol" for this call. Any ideas on what could be the problem?

  Here is the full source:

  package mytest;

  java.lang.String import;
  java.nio.charset import. *;

  public class MyTest {
  public final static Charset utf8charset = Charset.forName("UTF-8");

  public int printString (String s)
  {
  Byte [] utf8 = s.getBytes (utf8charset);
  System.out.println (utf8);
  }

  public void printString)
  {
  printString ("hello");
  }

  };

  Thanks in advance,

  Keith

  Your code is correct for java 1.6 and higher...

  First of all, you should check that java version is on your database...

  FUNCTION to CREATE or REPLACE getJavaProperty (myprop IN VARCHAR2)

  RETURN VARCHAR2 IS THE JAVA LANGUAGE

  name "java.lang.String return java.lang.System.getProperty (java.lang.String);

  SELECT getJavaProperty ('java.version') of double;

  in my case, I have java 1.5...

  If you look at the Javadoc String (Java Platform SE 7) you will notice that your version is located for java greater or equal to version 1.6

  Try with:

  CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED INSURANCE2."Test1" as
  public class MyTest
  {
  public static int printString(String s)
  {
          try
          {
          byte[] utf8 = s.getBytes("UTF-8");
          System.out.println (new String(utf8));
          }
          catch(Exception ex)
          {
            return -1;
          }
          return 1;
  }
  
  };
  

• Error 1606.Could access location %APPDATA%\ network When uninstalling and installing Java for vista

  I get "Error 1606.Could access location %APPDATA%\ network." "When I try unistalling Java (TM) 6 Update 5 and Java (TM) 6 Update 20 and when I try to download the latest version of java (25) Ive tried a lot to get rid of the problem, but nothing I tried seemed to help."

  Windows Vista 64-bit.

  Have you tried:

  1. http://support.Microsoft.com/kb/2258121
  2. http://support.Microsoft.com/kb/886549
  3. Create a new administrator account and try to install using this account.

• Re: "insufficient privileges" error when you run the Java stored procedure in another schema

  I get an "insufficient privileges" error when you run the Java stored procedure in another schema, see details below.  I don't know what are missing privileges (I already granted the EXECUTE privilege), suggestions?  -Thank you.

  Define a simple java class and deploy it as a Java stored procedure to test:

  
  

  Schema: User1

  test of the package;

  public class HelloWorld {}

  public HelloWorld() {

  Super();

  }

  public static String Hello () {}

  Return "HELLO";

  }

  }

  CREATE or REPLACE FUNCTION HELLO RETURN VARCHAR2 AUTHID CURRENT_USER AS LANGUAGE JAVA NAME ' test. HelloWorld.hello () return java.lang.String';

  Grant execute on USER2 HELLO

  Test the Java stored procedure through the PL/SQL function call (in the same schema):

  
  

  Schema: User1

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  anonymous block filled

  v_Return = HELLO

  Test the Java stored procedure through the PL/SQL function call in a different pattern:

  
  

  Schema: USER2

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  Error report-

  ORA-01031: insufficient privileges

  ORA-06512: at "User1." HELLO', line 1

  ORA-06512: at line 4 level

  01031 00000 - "insufficient privileges".

  * Cause: An attempt was made to change the user name or password

  without the privilege appropriate. This error also occurs if

  trying to install a database without the need for employment

  access privileges.

  When Trusted Oracle is configure in DBMS MAC, this error may occur

  If the user has been granted the privilege necessary for a higher label

  that the connection is active.

  * Action: Ask the database to perform the operation or grant administrator

  the required privileges.

  For users Trusted Oracle get this error, well that granted the

  the privilege that is suitable for the top label, ask the database

  administrator to grant the privilege to the appropriate label.

  You have created the function with AUTHID CURRENT_USER, which means that the function is executed with the rights of the applicant (but not with the rights of the author). This means that the applicant must have grants (directly or through roles) on all used/accessible objects in the service. In your case the user USER2 has not granted with EXECUTE on the class/source Java test. Class HelloWorld, causing the ORA-01031 exception. You create service without AUTHID CURRENT_USER (i.e. with AUTHID DEFINE, which is by default, if you do not have a specific reason to use AUTHID CURRENT_USER) or grant EXECUTE on JAVA test SOURCE. Class HelloWorld to User2.

  Dimitar

• WCF error when using the API of VSM

  VSM 9.1.4

  Oracle 10g R2

  I am attemtping to use the "MessageSendMessage" command in the VSM API to send back the client permissions and I get the following error message when running it from the VSM server.

  ERROR: The operation 'ContractUnlinkCIAsync' cannot be loaded because it has a parameter or type System.ServiceModel.Channels.Message or a type that has the MessageContractAttribute and other parameters of different types of return. When using System.ServiceModel.Channels.Message or types with MessageContractAttribute, the method should not use other types of settings.

  It's an odd error because I do not use the "ContractUnlinkCI" command which tells me that there is a problem with the generation of the class file.

  I ran the following command to generate my config file and the class in the directory "C:\Program Files (x 86) \Microsoft 4.0 Tools":

  Svcutil t:code /MessageContract. [URL ServiceManager.svc] / out: ISMAPI.cs /config:ISMAPI.config

  The class files and generated config ok. Then I copied the game config to the Web site's web.config file:

  < system.serviceModel >

  < links >

  < basicHttpBinding >

  < connection name = "BasicHttpBinding_IServiceManager" / >

  < / basicHttpBinding >

  < / links >

  < customer >

  < endpoint address = "[ServiceManager.svc URL]" binding = "basicHttpBinding" bindingConfiguration = contract "BasicHttpBinding_IServiceManager" = "IServiceManager" name = "BasicHttpBinding_IServiceManager" / >

  < / customer >

  < system.serviceModel >

  I put the ISMAPI.cs file in the App_Code to my site folder:

  

  My code works fine when I run locally and include the correct querystring values, but it returns the error above, when I run the code from the VSM server. The query string I used: default.aspx? ajaxfunction = 2 & tasknumber = 425134 & agent = 2370 & recvofficer = 2370

  using System;
  using System.Collections.Generic;
  using System.Web;
  using System.Web.UI;
  using System.Web.UI.WebControls;
  using System.Data;
  using Oracle.DataAccess.Client;
  using Oracle.DataAccess.Types;
  using System.Runtime.Serialization;
  using System.ServiceModel;

  partial class _Default: System.Web.UI.Page
  {
  Protected Sub Page_Load (object sender, EventArgs e)
  {
  Response.Expires = - 1;
  Response.ContentType = "text/plain";
  If (Request.QueryString ["ajaxfunction"]! = null)
  {
  Try
  {
  Int16 intFunction = Int16.Parse (Request.QueryString ["ajaxfunction"]. (ToString());
  Switch (intFunction)
  {
  case 1:
  If (Request.QueryString ["tasknumber"]! = null)
  {
  Int64 intTaskNumber = Int64.Parse (Request.QueryString ["tasknumber"]. (ToString());
  Response.Write (getTaskApprovalComments (intTaskNumber.ToString ()));
  }
  break;
  case 2:
  If (Request.QueryString ["tasknumber"]! = null & & Request.QueryString ["officer"]! = null & & Request.QueryString ["recvofficer"]! = null)
  {
  MessageRequest load = new MessageRequest();
  inStruct.sLoginUserID = System.Configuration.ConfigurationManager.AppSettings ["apiLogin"];
  inStruct.sLoginPassword = System.Configuration.ConfigurationManager.AppSettings ["apiPassword"];
  inStruct.sDatabase = System.Configuration.ConfigurationManager.AppSettings ["apiDatabase"];
  inStruct.eEntityType = CRTEntityForEmail.Task;
  inStruct.nEntityRef = Int32.Parse (Request.QueryString ["tasknumber"]);
  inStruct.ePriority = MailPriority.Normal;
  inStruct.eMMAMessageType = MessageMMAType.Approval;
  inStruct.nMessageType = 130;
  inStruct.lRecipientRef = ' ~ ' + Request.QueryString ["recvofficer"];
  inStruct.eRecipientType = MessageRecipientType.Person;
  inStruct.bEmail = true;
  MessageResponse outStruct = new MessageResponse();
  SMC ServiceManagerClient = new ServiceManagerClient();
  outStruct = SCM. MessageSendMessage (inStruct);
  Response.Write (outStruct.sMessage);
  }
  break;
  by default:
  Response.Write ("ERROR: invalid function!");
  break;
  }
  }
  catch (System.Exception Exception)
  {
  Response.Write ("ERROR:" + exception.) (Message);
  }
  }
  Response.End ();
  }

  I hope one of the other directors VSM has met this problem and knows a solution. I tried Googling this issue but with my knowledge of WCF, I don't know what I'm looking at. I also tried commenting on the problem area in the ISMAPI.cs file but it gives me an other errors so I obviously don't know what I'm doing.

  Thank you.

  If locally it works fine I guess you should compare the versions of .net framework assigned to your web applications (application pool), and all the parameters specified in the web.config file.

• Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7 - KERNELBASE.dll exception 0xe0434352

  Hello

  Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7.  I use the window of the object but the detail of the objects window arrives and immediately SQL Server stops with the error below and then opens again.  I didn't find any help with this specific error is but suspect there is a problem between SLQ Server 2012 et.NET Framework 4.  Unfortunately, I do not know what it takes in this regard.

  Thanks, Deb

  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Deb - HP
  Description:
  Name of the failing application: Ssms.exe, version: 2011.110.3000.0, time stamp: 0x5081c1cd
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
  Exception code: 0xe0434352
  Offset: 0x0000c41f
  ID of the process failed: 0x13a8
  Start time of application vulnerabilities: 0x01ce609a6d3db991
  The failing application path: C:\tempSQLWOW\110\Tools\Binn\ManagementStudio\Ssms.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 1fb1cbfb-cc8e-11e2-b436-abd2bebb3f17

  Hi Claude,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Good day!

  Answer please if you face concerns.

• Server java Connector running as a service

  Hello

  We want to run the server java connector DBAT as a service (just as we have for .net server connector) on a Windows Server instead of from, he command prompt and opening windows all the time. Anyone working on this before?

  Is there a way we can achieve?

  Any help would be appreciated.

  Thank you

  Hey Kevin,

  I was able to start JavaConnector server as a Windows service by

  (1) install the 32-bit JRE folder C:\Java

  (2) pointing environmental variables to the location of java (JAVA_HOME and JRE_HOME)

  (3) copy the server java connector on C:\ConnectorServer media

  and execution of the install of connectorserver.bat from the elevated command prompt.

  Thank you

• y at - it anyopen web source engine rendering that I can use in my java web browser project

  is there an engine open source web made (that supports html 5, css 3, javascript etc.) that I can use in my java web browser project

  WebKit is quite credible

  The WebKit Open Source project

• why we use the symbol $ java variable?

  his_$ account_tota, $ b... can u give an explanation for this variable. What is the symbol of $ use? Why we use the symbol $ java variable...
  I need a clear and simple explanation for example...: P

  No real reason, you can do it if you want. But you don't have to - I certainly didn't, and I rarely see code it does.

  You should take the time to find a way to find information. For example, I just typed 'java variable dollar' in google and ended up with this as the first shot:

  http://docs.Oracle.com/javase/tutorial/Java/nutsandbolts/variables.html

  I quote:

  "In addition, the character dollar sign, by convention, is never used at all."