CC 2014 - new installation - made and replace

Similar Questions

• Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 has 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM

• New installation Vsphere and vcenter

  This may seem pretty basic but I have not met this before and Vsphere threw me for a loop with the license change.

  I have a new installation, I train.  First question is ISCSI available with the license evaluation Mode?  It seems not so much me.

  If not then the second issue is the lack of customer is a new domain active directory.   Can I install vcenter not part of a domain, active directory and make all licenses from there?

  In my view, that the eval is fully functional. You must enable initiator iSCSI under storage adapters.

  vCenter didn't need to be a member of the domain, and also in vsphere there is no license server as with 3.5

• Design mode missing of the new editor find and replace of RoboHelp?

  Just, I started using RoboHelp 10 and was excited about the new find and replace feature. However, it seems to force the user to change in the HTML Editor (which is very difficult when the subject has tables). Am I missing some preference settings?

  The only solution seems to be to find a topic track in the project manager list and open in normal mode.

  Thank you.

  Carol

  Search and replace in files (as opposed to a single subject) has always been at the HTML level.

  If you do not use this feature update, do not use the field contains, unless you want to fuck your project farewell. See help Rh10 on my site.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• After the new installation Mobo and CPU, HDD IDE does not start in XP.

  I have improved my Athlon XP a new motherboard with an Athlon XII after 5 years. XP does not start and gives the following error:

  0x0000007B (0xF789E528, 0xC0000034, 0x00000000)

  I guess that's due to the used on the boards of different drivers. I can't boot mode safe. How can I fix?

  Help, please. Thank you!

  Hello Riggs614

  After Exchange of this type of major equipment, you will have to make at least a "repair" of XP.

  A repair will not lose any data, other that the Service Pack (if not on CD), no matter what Windows updates and unsigned, drivers that will need to be re-installed later.

  Stay offline for repairs and not go online again without a firewall is activated. After the repair of XP, install the Service Pack (if necessary), firewall, then you must install to the all the critical updates then.

  How to fix XP.

  1. start the computer from your Windows XP CD.

  2. When you see the "Welcome" screen press [Enter] to start the configuration of Windows.

  Note: Do not choose "to repair a Windows XP installation using Recovery Console, press R", not wanting to load the Recovery Console.

  3. accept the license agreement and Windows will search for existing installations of Windows.

  4. Select the XP installation that you want to repair in the list, and then press [R] to start the repair. Setup copies the necessary files to the hard drive, and then restart.

  5. do not press a key to boot from CD when the message appears. Setup then continues as if she were doing a clean install, but your applications and settings are preserved.

  http://www.theeldergeek.com/repairing_windows_xp.htm

  Way to scroll to the bottom of page for

  Windows installation CD - repair current Installation

   

  http://michaelstevenstech.com/XPrepairinstall.htm

  .

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• MacBook Pro 2.6 13 "mid 2014 8 GB. the HD is fried by virus. should I just take w Apple and replace a new SSD and you know how much $ would cost me? Thank you in advance.

  my MacBook Pro 2.6 GHZ I5 (mid-2014) 3 MB shared level 3 cache, 8 GB on-board 1600 MHz DDR3L SDRAM. the HD is fried by virus. should I just take w Apple and replace a new SSD and you know how much $ would cost me? Thank you in advance.

  Quan

  Contact ask an ANDS Apple Store.

  However, what makes you think that a virus fried your HD?

  Looking at it

  https://en.Wikipedia.org/wiki/MacBook_Pro

  Initially, you Mac Pro came with an SSD.

  Just what failure symptoms are you having? Maybe your SSD did not fail.

  If necessary and if yo are up to it you can replace the SSD yourself

  https://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade/DDR3_16 00MHz_SDRAM

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• I had a computer crash and made a new installation of Win7 and restoring all files to Carbonite.  I managed to get 5 LR running in LR.  However, I don't know that I have all my previous catalogs. How can I find my catalogs to ensure I have

  I had a computer crash and made a new installation of Win7 and restoring all files to Carbonite.  I managed to get 5 LR running in LR.  However, I don't know that I have all my previous catalogs. How can I find my catalogs to make sure I have a complete inventory of all my catalogs.

  If you have downloaded all the files Carbonite, then the question is, are your catalog never included in the Carbonite backup in the first place?

  If so, then all you have to do is look for *. LRCAT file.

• I have updated Dreamweaver for 2014 and this toolbar disappeared.  I have a new installation of 2014 on another computer and the toolbar is there.

  I have updated Dreamweaver for 2014 and this toolbar has disappeared.

  

  I have a new installation of 2014 on another computer and the toolbar is there.

  Anyone know how to get it back?

  I'll make sure "Enable related files" is checked:

  

  Otherwise, click on apply once checked and then restart Dw.

• Install a new hard drive and Windows 7 loading no settings are changed on the mother board or bios installation? :

  I have a desktop Dell-540 in which my c drive is a Raid 1 configuration of 1 TB (two disks to not up to 1 TB, Raid 0, which is the backup) which has all my programs and data.  I have a 2nd J: 1 TB (single drive - no raid) drive that I use as my back in-house to my drive c.

  I am running in all genres or the problems of Windows 7 as well as running out of space so I would install a new 2 TB drive as new drive c and re - install windows 7 for a clean install on a single partition.  I intend to disconnect my current c drive (which consists of my two disks in a raid 1 configuration) as well as to disconnect the 1 TB drive unique j and connect my new 2 TB drive.  I would like to install a clean version of windows 7.  So my question is this:

  If I disconnect all the old disks (c and J) and install a new one and start to load windows 7 on it, the new facility does affect the bios or motherboard settings?

  f for some reason so I have encounter problems, can I just unplug my new drive of 2 TB and re - connect my original c drive and drive j back to the motherboard and have it load up as it was before original, I unplugged my old PC would be back up and runing?  Or, install Windows 7 on a new drive change the settings of the motherboard or bios Setup that would prevent me to connect to any return to as it was before I started?

  In fact, raid 0 is striated, which means that two readers work as something one 1 TB raid 0 disk is made from two 500 GB drives. RAID 1 is mirrored, meaning that you would have two 1 TB drives each of which is one exact copy of the other. Replacing your hard drive and perform a clean installation of Windows 7 will not change your bios settings. You will need to enter the bios and change the configuration of the training of raid 0 or 1 for sata before install Windows on the new drive. To return to your original configuration and the hard disks, you will need to enter the bios and re - configure the hard drives in the raid 0 array or 1, whatever one you had.

  Jim

• I can't uninstall the old silverlight and replace it with the new version.

  Im trying to uninstall the old version of silverlight and replace it with the new. It won't let me uninstall. Help, please

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest you for the link and check if that helps:

  Uninstall previous versions of Silverlight on Windows

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  Also check out the link to install Microsoft Silverlight:

  Download Microsoft Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest to consult the article and try to uninstall the program:

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if it helps.

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• Can I request a new installation for Vista disk and drivers of my laptop after formatting my hard drive?

  I have a stubborn reality and impossible to get rid of the virus on my main hard drive and I think to format and to nine.  I want to know if there is a way to get a new installation of Vista for a clean install disc and a disk for the drivers of my laptop.

  Other info: number of grain of Vista is ripped but I have the model number for my laptop if that should be necessary.

  Hello

  After you have lost your product key shrinks your methods

  key finder programs won't asssit you if it is preinstalled

  Here are the different ways let you reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I had photoshop elements 13 on another computer that has been recovered by Microsoft and replaced by the new. How can I remove the serial number of a computer that no longer exists?

  I had photoshop elements 13 on another computer that has been recovered by Microsoft and replaced by the new. How can I remove the serial number of a computer that no longer exists?

  You are allowed to activate the software on two computers. If this is your second installation on the new machine, the software should assign without problem.

• New installation of Xubuntu w / Firefox on my PC. Everything works VERY slowly, even typing and cursor movement. Is - fixable?

  With this new installation of Xubuntu (which is supposed to be quick enough) with Firefox included, all transactions processed through the browser are incredibly slow: typing, go to other pages or Web sites; move the cursor is painfully slow, and sticky with time delayed reaction and excessive results. I have the maximum encryption and security; This could be the problem? Note: I noticed that type in this window is normal...? E-mail is correct, also.

  Thank you very much
  Bob

  Glad your problem is solved itself, and I see that you have also your problem another (1012424/questions/1012424). Don't forget to update Firefox, it should be 31 Firefox now or if Xubuntu is a bit behind perhaps still Fx30 but certainly not Fx28.

  Be aware that you will see big changes in Firefox

  • Learn more about the design of the new Firefox version 29
  • https://www.Mozilla.org/en-us/Firefox/tour/

  You mentioned

  why would they include an unsupported version of Firefox in the same package with the newest version of an operating system?
  

  Ubuntu and Xubuntu major versions come out every six months. Firefox updates every six weeks. Probably the first thing to do after you have installed a new version of X / Ubuntu is updated the software, also immediately before the upgrade to the next Xubuntu.

  Versions of Firefox & Ubuntu/Xubuntu

  I use Ubuntu 12.04 LTS for most. 14.04 is also LTS, so you have to stay on that instead of update in due course to 14.10

  • Pretty graph http://en.wikipedia.org/wiki/Ubuntu_versions#Table_of_versions

  I use their distro Canon of construction of Firefox since their deposit of Aurora. Who is behind Mozilla versions datewise (I also installed mozilla versions), but it uses the package manager, so no need for manual updates of Firefox. You probably don't want or need to do that, but if you do not want to install this as a browser extra is available for 12.04 & 14.04 of

  • https://Launchpad.NET/~Ubuntu-Mozilla-daily/+archive/Ubuntu/Firefox-Aurora
  • If you are interested by sets it Mozilla see
    Installing Firefox on Linux
    & https://help.ubuntu.com/community/FirefoxNewVersion

  Synaptic (graphical APT front-end server) package manager is therefore longer in default distributions of Ubuntu/Xubuntu, you could add Synaptic (included in gDebi in Xubuntu 12.04) otherwise use the "Software Center" to ensure that everything is kept up-to-date

  • Software Center http://askubuntu.com/questions/4983/what-are-ppas-and-how-do-i-use-them/40351#40351
    • https://sites.Google.com/site/easylinuxtipsproject/first-Xubuntu#TOC-apply-all-available-updates
  • Https://help.ubuntu.com/community/SynapticHowto Synaptic Package Manager

  I know that some earlier versions of Ubuntu to (less LTS versions) the canonical versions of Firefox did not update, but I expect the center of software or package manager to be able to keep Firefox reasonably aware and do not drop by more than one version.