CC and yosemite

Similar Questions

• What is the largest hard drive or the RAID supported by El Capitan and Yosemite?

  What is the largest hard drive or the RAID supported by El Capitan and Yosemite?  Also, WHERE can I find this specification?  Drobo claims that 16 TB is the largest external RAID supported and I do not.

  FYI............ 2 UPDATES since I posted this question:

  "1. Drobo has updated their FIRMWARE to allow now to 'beyond' 64 power to RAID".  Thus, their original 16 TB limit has now been replaced by their new limit of 64 to.  Also note that when you use a Drobo, Apple Mac OS does correctly shows space 'Drive' and the 'free space', if the Drobo 16TB exceeds the size; but the Application DashBoard of Drobo displays the correct numbers.  For example, my Drobo 5 d contains 5, 8 TB disks, for a total size beyond 40 to RAID (theoretically, since most of us should know, now, that the ACTUAL SIZE IS SLIGHTLY SMALLER than THE THEORETICAL SIZE).  AVAILABLE FOR USE ACTUAL SIZE IS ONLY 28.9 TB.  Thus, 40-28, 9 = 11.1 TB gets used in place for the PROTECTION of RAID beyond and the difference between REAL SPACE and SPACE THEORY.  It IS NORMAL because any RAID 5 device always uses about 1 size of hard drive for its Protection.  So, knowing this, the DeskTop icon showing 28.9 TB disk space and free space as everything that is not yet used.  However, instead, the Mac OS shows 70,37 TB disk space and free space like 68,37 TB, which are both incorrect.  Although I'd love it if Mac OS has been magically increase my disk space, in fact, these two numbers are false.  Drobo knows this, and Apple has not, in my discussions with both.  So I hope, between the two companies, that this problem can be corrected.

  2. after many hours on the phone with Apple Support, through no less than 6 people including 2 senior advisers, NONE OF THEM COULD ANSWER MY QUESTION ON CE WHO IS MAXIMUM ALLOWED HARD DRIVE or RAID SPACE AUTHORIZED BY Yosemite and El Capitan.  For me, THIS IMPORTANT FACT SHOULD SIMPLY BE LISTED IN THE OS SPECIFICATION TECHNIQUE, it's quick and easy to read on the Support Site.  But Apple is the new bureaucracy, they are, I don't see what is happening any time soon.  So, be aware that, for now, HE IS No. LIMIT ON SIZE, as an Apple adviser said; but could not confirm in writing; and, IT IS AN INCORRECT DISPLAY SIZE AND FREE SPACE, if your drive is greater than an unknown 16 + TB in size.  Note that I have 3 other RAIDs that are properly in place showing that 9 TB, TB 12 and 18 to size; but I do not know how the SIZE IS IMPORTANT to ensure that the operating system display it correctly, except for my Drobo TB 40.  So, the bottom line, somewhere between to 18 and 40 to is where he goes wrong, in its display of sizes.

• Acrobat 10 and Yosemite

  Problem - my 10 Acrobat (to 6) does not work. Sequence of events - I have the Suite 6 and then downloaded CC for my business. After the challenges, I removed the cc apps. My own Acrobat stopped working (I had updated to Yosemite in the meantime). I then remove my Acrobat re 10 - install and it will not install from the disc - it is probably a thing of Yosemite. How to recover a 10 so that I am not limited by my old 9 and not trapped by my cc of companies?

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

  -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

• I'm waiting for a new iMac i5 retina to join my shop this week but I wanted to try CC at the same time, after which I will move at the iMac and Yosemite. Now OS 10.6.8 on my Mac Pro ' 07. It will work or am I turn my wheels?

  I'm waiting for a new iMac i5 retina to join my shop this week but I wanted to try CC at the same time, after which I will move at the iMac and Yosemite. Now OS 10.6.8 on my Mac Pro ' 07. It will work or am I turn my wheels. I do a lot of work that is not in the darkroom with CS3 and use Lightroom starting today, but think to do when I get the new machine. Semi-retired photographer and eager to spread my wings a bit more on the creative aspects instead of to the day the day. Thank you for any response.

  MINIMUM requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

• Photoshop CS5 and Yosemite

  After reviewing through questions and answers about Photoshop CS5 and Yosemite, I tried to reinstall CS5, but it still has not solved the problem and I can not open Photoshop. Any ideas out there

  You need to install the latest Java SE6 runtime, go to this link and download it and it should take care of your CS5

  Java for OS X 2014-001

• Why Apple ID work for the devices iOS and Yosemite... .but not for iCloud?

  Recently, I upgraded to Yosemite. So I was forced to change my PWD for Apple ID.  I have AN AppleID account. After having changed the PWD, other requested change upgrade iOS devices, and all the work.

  UNLESS iCloud refuses to accept my new Apple ID... All other devices, updates work fine with the new PWD AppleID...

  What is the problem with iCloud?

  How can I force it to accept the Apple that accept all other devices/systems ID?

  Jim B

  Have you tried the signature to iCloud and then again?

  What to do after changing Apple ID or password - email address

• 3970 scanner and Yosemite

  I use a MacBook Pro, and I have a Scanjet 3970 is fine.  But when I went to download Yosemite, new Apple operating system, I got a message saying that the connection of Power PC with my scanner no longer works.  Is there any solution for this?

  In the past, Apple must approve the driver for the scanner, before the new operating system can interact.  It has been a problem for a while, whenever the operating system is updated.  Wait that the pilot is approved before installing the upgrade to Yosemite.  If you upgrade until the driver gets approved, the scanner part will not work.  I came across this several years previously, is not something new to Apple and scanners.

• Issue of C1765nfw and Yosemite.

  Since the installation of Yosemite om my Mac, my Dell C1765nfw printer will only print single copies. If you request multiple copies, it fails with the following message:

  

  On the same network, with a computer with the Mavericks, it prints very well.

  Even at home too.

  I reinstalled the drivers.

  A kind poster on another forum gave me a temporary solution that worked for me. It's here - use at your own risk:

  1. under the spotlight of Terminal Type and then press ENTER.

  This should bring up the terminal window/program.

  2. in the Terminal type

  sudo sh - c "echo"Sandboxing Relaxed"> etc/cups/cups-files.conf"

  It will ask you your password (if you type it is hidden). After this series of type:

  sudo launchctl stop org.cups.cupsd

  After that if you are lucky, the printer driver must start working. (which he did in my case)

  If you want to revert the changes bring the terminal

  type cd/etc/cups

  type sudo nano cups - files.conf

  After that, enter your password again

  then you are in an editor that allows you to edit the file

  Remove the last line that says Sandboxing relaxed

  Press ctrl x

  Confirm by y

  then press enter to save the file

  After this question again

  sudo launchctl stop org.cups.cupsd

• VMware Fusion 5 and Yosemite

  Hello

  Does VMware Fusion 5 support Yosemite Mac OS X 10.10.4?

  I just upgraded from Mountain Lion, but when I tried to run a virtual machine that was working on the Mountain Lion, I get "could not open/dev/vmmon: no such file or directory."

  Thank you.

  Hello Yu Chun-Pong,

  The answer is 'No', and follows the answer a little longer...

  I'm sorry to inform you that Fusion 5.x does not work under OS X Yosemite.

  5.x end merger of general support was on 23/08/2014, before the release of Yosemite.

  You can watch the Matrix of Life Cycle of the products for the exact dates.

  It is highly unlikely that VMware publishes an update to a product that has been withdrawn.

  You can roll back to Yosemite to the Mavericks if you wish to continue using the Fusion 5.x or upgrade to a newer version supported.

  If you want to test the latest version to see if it is worth your expenses, you can install and run a fully functional version of 30 days before actually committing to spending anything.

  After 30 days, you purchase a license to modify the merger installed in an unlimited version.

  For the assessment of the merger's direct download link

  In addition, you can also choose to run the Tech Preview, but don't realize that--although normally very stable – there is no guarantees with preview/test software.

  The Tech Preview is here: VMware Fusion Technology Preview 2015 [ARCHIVE]

  --

  Wil

• fonts with creative cloud and Yosemite

  I'm finding that some of my fonts will not work with the software CC. Also, the storage of fonts has changed in Yosemite. Can someone direct me to a resource so I can understand which fonts are compatible and where they are stored?

  Hello

  Please see the fonts creative cloud, installation, FAQ | Adobe

  Kind regards

  Sheena

• Zoom tool shortcuts Photoshop CC and Yosemite El Capitan

  Hi people,

  I just upgraded to Yosemite El Capitan (v10.11) now, in CC in Photoshop, hold down the Cmd key and the space bar to zoom in and out with my stylus on my Tablet Wacom, the transition is not smooth more. It does not show the changes until I up my pen for my tablet.

  (same problem with my trackpad and on my two computers)

  Very very unconfortable.

  Prior to El Capitan, she was nice and smooth.

  Any suspicion on this subject?

  Thank you

  Please go through this Document, it is known problem with El capitan.

  Photoshop and El Capitan | Mac OS 10.11

  Thank you

• Hebrew and yosemite problams

  Hey, I have three problems with illustrator cc 2015:

  1. when I copy the Hebrew text for the program it is pasted back... Here is the example:

  

  I tried to change the language, but it won't work

  2. when my keyboard is Hebrew I can't work on simple tasks on illustrator (as: copy, paste, place etc.) it damages my workflow, because I need to change the language whenever... very depressing...

  3. I updated my iMac system operating to yosemite, and now when I want to open a file with column display, I can't see the image of the entire record if the root is long. I asked this on apple's site and they said it is a problem with adobe...

  Here is the example:

  

  hope someone can help me with these problems...

  Thank you!!

  hemdabella,

  To start with the last piece, I think you should drop view column until it is finally set by applying.

  On other issues, you can start with this (which can sort at least some of them on) as appropriate:

  I think that the good order/way is to update the operating system, and then reinstall the applications. Which was how you did it?

  If this isn't the case, it may be best to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Major Photoshop lag when using ATI Radeon HD 5770 and Yosemite

  I have a Mac Pro early 2008 running the ATI Radeon HD 5770 (recommended by, purchased directly from Apple). Since the installation of Yosemite my CC 2015 (or 2014) Photoshop has become excruciatingly difficult to use because of the major lag. I get the spinning beachball after almost every order using a brush or eraser (15 seconds or more of delay). I did a clean install of Yosemite and always have the same question. In Mavericks, Photoshop CC 2014 worked perfectly without any lag.  I adjusted the performance parameters in the pane of Photoshop preferences without success (Advanced Graphics Processor settings Basic), Normal and advanced without success. Does anyone have any ideas or recommendations how to fix this problem?

  If your Mac makes a video card, then this is a way out. Apple is promising El Cap will address the issues of speed of Yosemite, then maybe who will take care of him if you don't mind the wait. Adobe works with them about it.

  Gene

• CS4 and Yosemite

  So I have CS4 Design Premium disks and I would like to install on my new iMac Yosemite 10.10.4. He set up the first disc, but then when he asks me to insert the second disk, it freezes and will not finish the installation.  He acknowledged the second disc (the icon appears on the desktop), but the installation continues.

  I really want to install CS4, so then I can use my CS5 update records.  Any suggestions?

  Please follow the steps on how to install the upgrade: install Adobe Creative Suite 5 or 5.5

  If you get test message, then the serial number or download is incorrect.

  Concerning

  Stéphane

• Illustrator CS6 display problems and Yosemite

  I recently bought a macbook pro with Yosemite and problems with Illustrator CS6.

  There are so many bugs that I can't set as follows:

  • Dialog boxes appear off the screen
  • Cannot scrolling completely on the dialogs for the column
  • Cut and paste Illustrator artwork in Photoshop causes random pixelated appearance.
  • Text in my work and in some of the menus and icons in the tool bar appear to be lo-res.
  I tried various installation options, looked at the display screen and preferences options, but I have no idea what is happening.

  Honey,

  First of all, remove column view until Apple fixed.

  The right path/order is to upgrade the operating system, and then reinstall the applications. If this isn't the case, already, in my view, that it should be, at least for Illy.

  You could reinstall using the way complete three steps to ensure that (if not, strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

  It is also important to drivers (Wacom imcluding) have updated.