CC of 2015 rubber-band layers and vertical lines in the timeline

Similar Questions

• There are horizontal and vertical lines on the screen

  I have an asus game monitor old 2 years... other days I let my 12 year old son House and when I returned, he said my monitor was broken... I shot to the top of the platform and there are... also.i .vertical and horazonaly can see the image on the screen through the lines as if someone in em pencil in... IV never seen this befor... any clues as to get rid of um? Home build phenom 965 be-850 watt he's corsair psu-all sata 1.5 to hdd-7970 saphire dule x - all air cooled and clocked at 4.114

  Check the video cable to the monitor and the computer side, the lines of deformation may indicate when its loose or if you have a bad cable. A bad cable is unlikely, but one cannot rule out completely without trials.

  If you have another monitor or know someone who you can borrow a display test, it would be the fastest and the most effective way to be sure where the problem is.

  If lines change or "move" when you move the mouse or a window autour, this indicates a bad connection or bad cable as indicated above or a problem with the video card. Overclocking can cause this kind of things happen as well so if you have overclocked your hardware, return it back to the factory settings and the problem may disappear.

  If the lines are always the same and do not change when you move the mouse or a window autour, the monitor is probably the problem.

  Figure 8 and 9 on the link below both show what it looks like when the monitor is the problem in the above example: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph05236&lc=en&cc=ie&dlc=en

• 2008-2009 iMac and vertical lines endless boot loop

  My father has an iMac from 2008-2009 and it has been fine.

  However yesterday it suddenly developed vertical lines on the screen (see below). These lines seem to be 'above' the Apple logo. Unfortunately I can not access the info from the computer

  The Mac is stuck in an endless loop of startup where it never gets beyond the Apple logo and turn the circle loading.

  I started using the option key pressed and tried to the recovery for the boot partition. This again goes to the Apple logo and the rotating circle gray until he says: "If you want to continue in English press the return key" what I'm doing and then nothing (the circle stops spinning). Same thing happens when the safe boot mode.

  I also tried to boot from the recovery drive (separate USB) and nothing... Fortunately, I can access its backups like he always its data.

  I also tried the mode via Firewire to my laptop and disk target hard iMac mount (although the Firewire icon appears on the screen of the iMac).

  I also tried re-creation of the AMFR2 and MSC.

  My guess is that it's a failure of motherboard somewhere as it seems beyond normal graphics card. For some reason any my store does not have engineering appointments at the moment, so cannot take it.

  Is the consensus, that it is a dead iMac? Thank you

  

  (Note the "burrs" on screen is from my phone, not on the iMac!)

  Hi, Steve Hayes1,.

  I had one come in the other week with these lines - GPU issue. Replaced it and worked like a charm.

  With respect to the infinite loop, try to start from an external drive and load an operating system. Should I still do the endless loop?

  Kind regards

  BleverCastard.

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Im running ADOBE CC 2015 on an iMac and Illustrator plant all the time when I try to use the save for web. I need to use this feature, all day and am frustrated of all accidents. Help, please.

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• How can I recover the functions drag horizontal and vertical to center the portions of the image being developed? [was: Question]

  How can I recover the functions drag horizontal and vertical to center the portions of the image being developed?

  1 - question double deleted

  2 the name of the program you are using then a moderator may move this message to the correct program forum

  This forum Cloud is not on the program problem... help a program would be Photoshop Lighroom or Muse or?

• HP 8740: Vertical lines, while the scanning & photocopies

  I bought a new HP8740 about three weeks ago and everything worked well until today.

  Now I have black vertical lines down the scan or photocopy.

  First of all, I turned off the printer for 30 seconds and put the plug directly into the wall.  It did not work.

  I turned off - unplugged for 5 minutes - but still has the black lines.

  Can someone please suggest something else I can try.

  Hello @gouldian, thank you very much for your answer.

  The only difference between the analysis of the dumpster and using the ADF is where scanning occurs. Uses of the ADF Strip glass (1 "wide) toward the left side of the pane of glass for analysis. Cleaning if ideally white scanner ADF lid and glass ADF scanner should have solved the problem.

  I suggest you to do a blank copy on ADF, keep the page in front of you and carefully clean the place, you get the line in the band scanner & the white plastic strip.

  If the issue is always I suggest you to clean the ADF mechanism itself. You can watch a video of HP http://hp.care/2bYt7Qu that will help you to do this. The video is made using the Officejet 8600 printer, but it's the same for your printer as well.

  Please let me know what happens. Thank you!

  See you soon

• Flashing of the vertical lines in the tab bar?

  There are small vertical lines in the tab bar. They appear after the closing of the tabs. They are flashing, then change places when I place the cursor on any Firefox buttons or bars. And sometimes, they are flashing and the text cursor in the address bar of mirror.

  Disable all modules and themes does not affect them.

  I'll try to add a screenshot of the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• ProBook 640 G1: Vertical line down the left side of the screen

  I have a vertical line on the left side of my screen on my G1 640 Probook - model number is T1C08UT #ABA.

  I've seen other similar posts and the suggestion was to plug an external monitor. I did it and the line does not appear when hung outside. Someone at - it any other ideas? I used product Wizard and all my drivers also show to date. It is under warranty, should I just through HP warranty repairs? Thanks in advance.

  Yes, thank you. It was under warranty with HP, so they fixed it. It seems they replaced the raw Panel and she came back that all fixed as good as new.

• HP Pavilion Notebook 14-n271tx: a vertical line in the middle of my screen

  Hey there, I would like to know more about the vertical line in the middle of the screen of my laptop. There will be a white vertical line in the middle of my screen sometimes but when I adjust the position of my laptop, it disappears. Can I know why is it happening? Is it because of problems in the system or what? How can I solve this problem? What I send to HP customer Service to solve this problem?

  Hi @DustMidnight85

  Welcome to the HP Forums!

  This is a wonderful place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with the display, but if you change the position of the screen, it disappears.

  Here is a link to the display quality problems that can help.

  As you said it disappears when you reposition the screen, that the connection cable can become loose or damaged opening and closing the display.

  Here is a link to laptop HP Pavilion 14, HP Pavilion 14 Touchsmart laptop, HP Pavilion 14 Touchsmart Ultrabook, maintenance and Service of Guide. Chapter 4 page 36 has removal instructions that can help you check for this problem.

  If your laptop is under warranty or you wish to help please contact HP support for assistance.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Satellite M70-339 vertical lines on the screen

  Hello...

  I have a Satellite M70-339, which will show only the vertical lines on the screen.
  I connected an external monitor and booted in safe mode.
  I uninstalled the display drivers.
  I started to monitor and reinstalled the display drivers.
  The computer will now boot up screen.

  I put the display to indicate to both monitor and screen.

  On the monitor, all right.
  On the screen, I get vertical lines color, similar to a wallpaper (wallpaper is not pretty).

  Did anyone has got any ideas what could be the problem, or how to diagnose the problem
  Any help would be appreciated.

  John C

  If everything is OK on the external monitor that is the best evidence that this problem is related to the internal LCD. Display must be exchanged.

• Qosmio G10 has vertical lines on the screen

  I have a G10 which I use for the last 15 months since I bought it.
  However, there are now 4 vertical lines on the screen, 2 Purple (magenta?), 1 yellow and 1 cyan. Other than these lines there are no other problems, it never fell down or something like that.

  The lines are still there, they do not change in any way and are always in the same place. They appear on the screen at first power up, before the Qosmio logo lights up.

  They have not all appear at the same time, they all appeared individually in the past two months. I've seen the last of them disappear briefly, then stay on.

  I guess that my screen is dying slowly, I guess to be an expensive item.

  Any advice thrown my way would be greatly appreciated!

  I took a picture of the screen you will find at:

  http://www.imagebucket.NET/images/lldata/displaylines.jpg

  Note: the photo was taken with Media Player full screen on a black image, just to clearly show the lines)

  Hello

  I suggest you connect an external display to check if it's a graphics card or a display problem. If cela pipes appears also on the external screen then it could also be a problem with the graphics card.
  If these lines do not appear on the external display while the display of the laptop has a malfunction.
  However, this does not change your situation. I recommend you contact the Toshiba ASP to solve this problem.

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• Satellite P30-110: vertical lines on the screen - Virus?

  I have a 110 - p30 and emerged recently vertical on my screen I have run norton AV and nothing was found is a possible virus any help appreciated because I don't want to lose all my work.

  Hi Dave

  If you don't want to lose your work trial to save on a way you like it (data CD/DVD or copy files on the external HARD disk device).

  I don't really know if the vertical lines are the result of some viruses, but I believe some hardware malfunction can be responsible for this. Just detailed test can give more answers. In your case the best solution is to backup all important data and preinstall the device with the recovery media. On this way the unit will be own pre-installed and you can check if the lines happen.

  If so, there are certainly a hardware problem. Sorry, but in this way it is not easy to give you more answers. Please back up your data. If the problem will be much worse than what you have a big problem.

• Satellite M60-104 - vertical lines on the LCD

  Hello guys,.

  I have a Toshiba Satellite M60-104 and in recent months, I noticed vertical lines on the LCD screen. How can I solve the problem?

  Any response will be useful,

  thanx

  Hello

  First of all, you should check if you have the same problem on an external monitor. So you can check if the problem is the graphics card or screen.

  However, I think that the motherboard or display needs to be replaced. To do this, you can go to an authorized service provider.

  Welcome them