CD burner reading and writing but dvd reading stopped to write
I can burn a cd, but it won't burn dvd
This can happen because the portions of CD and DVD from the drive using different heads of burning discs. If a cleaning disc does not put things right then the likely drive needs to be replaced - assuming, of course, that your question means that you USED TO BE ABLE to burn DVD discs but no. LONGER CAN. If you've never been able to burn DVD discs that can be a problem of software such as Windows XP does not support burning DVDs, you need a compatible software to burn DVD discs.
"cliftonsimpson" wrote in the new message: * e-mail address is removed from the privacy * _xp...
I can burn a cd, but it won't burn dvd
http://answers.Microsoft.com/message/73aef306-DB17-4525-A146-d14e04b78baf
Meta tags: hardware; windows_xp
Sunday April 8, 2012 17:03:32 + 0000: CreateMessage cliftonsimpson
Tags: Windows
Similar Questions
-
How to burn pictures and audio on DVD
Audio on a DVD
I'm still tryihg master, creating a dvd... If I have too many pictures, I get "error synchronizing project" and if I am able to burn one, part of the music is not playing... I have 5 minutes or more in the mddle who is dumb? any ideas? I hope someone can help me!
I'm still tryihg master, creating a dvd... If I have too many pictures, I get "error synchronizing project" and if I am able to burn one, part of the music is not playing... I have 5 minutes or more in the mddle who is dumb? any ideas? I hope someone can help me!
I need to understand...
You have a bunch of photos that you want to make a video of.
You want to add music in the background.I'm wrong, so far?
In the affirmative. Please check your images file extensions and the music file.
File extension is last 3 letters of the file.
Your image files must be either png, jpg, bmp.
Your music file must be wma or wav.If those that occur, then please follow this...
Open Windows DVD Maker > add file, import your photos > next > at the top, click on slide show > click Add music, navigate to the music file and select. Click Add > check "change slide show length to match music length > click Change slide show > Burn"t-4-2
-
Not possible to burn a disc using Windows DVD Maker - stops at 6%
burn a disc in creation of windows dvd... it is 6% and then says... a mistake unexspected portfolio.
It retains this operation around the area of 6/8% and gives not only that details an error due... what should I do?
It retains this operation around the area of 6/8% and gives not only that details an error due... what should I do?
========================================
You may have a problem with incompatible source files.Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:Photos - bmp
Video - wmv or dv - avi
Music - wma, wav, wmvVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Please note that all my photoshop and bridge are closed so don't know why Im having this problem.
Your applications can be closed, but the processes are still present. End it in Task Manager / activity monitor.
Mylenium
-
Burn. AVI file on DVD-R Virgin
I created a .avi file I want to burn it to a DVD so that it can be watched on a DVD player. Essentially, just trying to convert movies to the House that I recorded on a DV tape to DVD format so that it can be monitored via a normal DVD player. (In case it is relevant, I did the .avi file using a software called MotionDV Studio. "It's a program that comes with the model of camcorder, Panasonic PV - GS150 Neu.) However, when I insert a blank Sony DVD-R disc in the DVD drive in my laptop, the player does not seem to recognize that there is a disc in there.
The DVD drive I have is an Optiarc-CDRWDVD CRX890S ATA. I checked the features of this material on the internet and he must accept DVD-R discs. I also checked in the device (from the control panel) Manager. The State of the device indicates that the device is functioning properly.
In the Windows Help and Support window, the theme of 'Format to a CD or DVD' seems to suggest that a dialog box should appear when I insert the blank disc. However, it is not.
I tried to use Windows Media Player to burn the .avi file but it says there is no disc in the DVD drive, even if the blank DVD-R disc is there.
I also tried to use the Windows Explorer. I find the .avi file that was on my hard drive, and then you press the "Burn" button while the file has been selected. At that time, opened the DVD player and a dialog box appears asking to insert the recordable disc. I inserted the above disc, but there is no other activity of the laptop.
I also tried to buy a new set of DVD-R discs, but met the same problem.
What other steps can I take to burn the .avi on the DVD file?
Thanks in advance for the help on this.
I created a .avi file I want to burn it to a DVD so that it can be watched on a DVD player. Essentially, just trying to convert movies to the House that I recorded on a DV tape to DVD format so that it can be monitored via a normal DVD player. (In case it is relevant, I did the .avi file using a software called MotionDV Studio. "It's a program that comes with the model of camcorder, Panasonic PV - GS150 Neu.) However, when I insert a blank Sony DVD-R disc in the DVD drive in my laptop, the player does not seem to recognize that there is a disc in there.
The DVD drive I have is an Optiarc-CDRWDVD CRX890S ATA. I checked the features of this material on the internet and he must accept DVD-R discs. I also checked in the device (from the control panel) Manager. The State of the device indicates that the device is functioning properly.
In the Windows Help and Support window, the theme of 'Format to a CD or DVD' seems to suggest that a dialog box should appear when I insert the blank disc. However, it is not.
I tried to use Windows Media Player to burn the .avi file but it says there is no disc in the DVD drive, even if the blank DVD-R disc is there.
I also tried to use the Windows Explorer. I find the .avi file that was on my hard drive, and then you press the "Burn" button while the file has been selected. At that time, opened the DVD player and a dialog box appears asking to insert the recordable disc. I inserted the above disc, but there is no other activity of the laptop.
I also tried to buy a new set of DVD-R discs, but met the same problem.
What other steps can I take to burn the .avi on the DVD file?
Thanks in advance for the help on this.
======================================
Without the right software... burn an .avi to DVD file
will create a DVD data... not a DVD-video.To create a video DVD that will play in a free-standing DVD
Player... you need of DVD Authoring software.If you're running Vista Home Premium or Ultimate you...
have Windows DVD Maker, and it should do the work for you:
(if you don't have a DVD Maker... scroll down for an alternative)The Beginner Guide to creating Windows DVD
http://www.windowsdvdmaker.com/guides/beginner/Windows Vista-
Burn pictures and movies to DVD-video
disc using Windows DVD creation
http://windowshelp.Microsoft.com/Windows/en-us/help/5633ddcd-46a8-4d8e-82E1-2506401a60261033.mspxFree the following if you do not have Windows DVD Maker...
software may be worth a try:DVD Flick
http://www.dvdflick.NET/Be sure to read the Guide:
http://www.dvdflick.NET/Guide.phpIf you have problems to download DVD Flick...
Try the following direct link:
http://sourceforge.net/projects/dvdflick/Files/dvdflick/dvdflick_setup_1.3.0.7.exeSave the file to a folder on your hard drive and
install from there.Tutorials:
Tutorial DVD Flick
http://beginwithsoftware.com/videoguides/DVD-flick-Guide.htmlBurn any Format video DVD PC
http://www.freevideoworkshop.com/dvdflicktutorial.htmTo create a video DVD base that should play in a free
permanent drive DVD... try the following...Good luck.
First... read the DVD Flick Guide to familiarize
with the program.Open DVD Flick and insert a blank DVD in your drive.
If the window of Autorun from your computer... just close it.
Click the project settings button and check... Video /.
Target format... residents United States... Choose... NTSC /.
Accept.The title button left click Add and navigate to your
Video clips and select the ones you want on the DVD.You can have by selecting one and then use
the up and down buttons.Left click on the button create DVD / OK / Yes / Yes.
Please wait while the DVD is created.
When the text "Completed successfully" is displayed you
DVD Flick can close. Now you can eject your DVD
and play in your DVD player.At some point you might want to buy more
Advanced Cyberlink, Nero, Roxio, software
Ulead, etc... but at least it is a start.Good luck.
John Inzer - MS - MVP - digital media experience -
Original title: Dvd rom problem
Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?
Hello
1. When did you start to question?
2. did you of recent changes on the system?
3. you receive messages or error codes?
You can check the following link and try to run the Fixit and check.
-
Recently, I copied some old tapes vhs to dvd (using a Panasonic dvd recorder). They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?
Hello
Its probably an alignment problem - that is, the Panasonic is written outside of the
able to read DVD computer settings.Normally, if you want to create CD/DVD that can play on standard devices (for example
like the Panasonic) the MASTERED format should be used. Does the Panasonic
offer a choice or formats? If the Panasonic uses MASTERED, then this is definitely one
alignment problem. If the alignment can be defined in fact would cost more than the
device being aligned (if you could find someone who could actually do).I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
TSST corp CDDVDW TS-L633B stopped reading and writing
I have a laptop Acer 4736Z with a TSST corp CDDVDW TS-L633B DVD - RW, so decide simply ceased to read and write DVDs and CDs. When I insert a blank dvd, it will ask me to burn files to it but when I do, it complements the habit and will the useless DVDs. When I insert CD or DVD, the drive does not read it more.
Please help me on how to solve this problem.
Thank youHello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
This troubleshooting might not help if there are problems of alignment and wear it
is worth it.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
UNINSTALL - REBOOT this will refresh the default driver stack. Even if the disc is not
shown continue below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other
programs - a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you
upgrade to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the
Setup Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check
in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
Often, clean power and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system
Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
(Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
function, while others do so correctly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
some registry entries that do not fix the resolution of problems and those who 'could' be the
cause.Check with your system manufacturer Maker and device for these two possible firmware updates
and the correct registry entries for your car.Here are the keys in my opinion, are those in question - for the subkeys of the CD/DVD drive
of course there will be other subkeys in these keys. Do not forget to ask specific keys
in question as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even right for registry settings
your CD/DVD from someone with the same drive model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager,
that displays all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
Need help for reading in parallel on the same interface and writing XNET
Hello. I need help to configure CAN interface to write and read from the same interface.
I use NI PXI-8513/2. I use CAN1 as interface.
My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.
So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...
I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.
What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.
I think I would get errors that interface is already in use.
Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.
I opened to suggestions of how best to implement the interface.
I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.
Thank you
Hi Rus,
The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.
Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.
-
simultaneous reading and writing on a PDM file
I found similar discussions on here, but none that satisfied my problem. I'm running several loops within a vi, which writes data in a permanently .tdms file. Another loop to finish its task from the start in a test, and I want to transition this loop so that it accesses the file writing and started writing on a network. It also enables me to check that the data is being stored in the file and that it is corrupt.
I started with just the basics, but when I pass the second loop to read the file that is is always written off mistakes, saying that she met at the end of the file. It does if I put the count 1, -1 or anything in between. It illuminates, however, the end of the file output.
I have the entry in the file tdms on PDM read wired to a local variable, just as I do writing PDM, they all have both read the same thing and I get an iterations of a data value of the reading, so, apparently, file access is no problem. And I have to someone who cringed to local variables, ensure that reading and writing are not activated until the local variable is updated.
Try to set the "group name" entry on «TDMS read» If you write more than one group, you can use "View the contents of the DDHN" in order to get a list of groups.
Herbert
-
simultaneous reading and writing files TDMS
A customer had a program written in 8.6; the programmer is no longer available and I'm looking to debug intermittent problems.
N - channels of data is acquired and streamed to a PDM file. The operator can select a channel to view data in real time, but the display is one scope table displaying 15 seconds worth of data and when switching of channels the program "returns" display with the last 15 seconds of a data value of the new string (barrier data extracted from the TDMS file).
What I notice here, aside from using sloppy cluster error, is that both references are open in the file - one for writing data and the other for recovery data. Is this a good practice? is it necessary or one reference supports the reading and writing? Is this a possible source of problems?
thanx
lmd2
You can do the same thing with a single file reference.
The issue of not being able to see the data that was written after the reading of reference has been opened is known for having refnums to open in two different processes, but not in the same executable or VI.
Herbert
-
laptop is not reading/writing cd/dvd
My laptop is not reading/writing CD/dvd
Hello
1 did you change on your computer?
2 did you receive an error message?
I suggest you to follow the steps from the links and check out.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
-
Do not read CD but DVD read & write
Hello
In my ACER laptop, now I am facing problem CD format is not read but DVD can read & write also.
Could be he you pls tell me what may be the problem?Hi ABN1706,
Please see the link below for an article about the if your CD-ROM drive is not recognized, with a few possible corrections:
http://support.Microsoft.com/kb/314060
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Is not my cd - dvd burn/read any dvd.
Original title: tsstcorp cddvdw sn-208bb.
Hello
I have a samsung RC-530-s04pt laptop and my cd - dvd only burn/read all DVDs (no cd try), I update the firmware on TSST corp, fixit performance, update the driver (from Device Manager) and nothing worked. I read the solution suggested here (http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/problem-with-my-tsstcorp-cddvdw-sn-208bb-driver/c2c0bff0-8992-460a-9f74-40132b4372c3?msgId=c7fa2ed9-e64c-4d23-b2fd-b0c043f06446) and did not work, the registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318} shows not all UpperFilters and LowerFilters value.I'm running out of options and really need some help here.Thank youJorgeis there an error message?
Try the procedure described in the link:
-
Reading and writing Excel File
Hi all. I need your help. I need to know how to read EXCEL FILE and insert it into a table of some. Also, can someone tell me how to write in an EXCEL FILE?
Thank you in advance.READING EXCEL
There are several options how read file - ODBC, excel on a fly--> conversion to CSV excel (if you have 11.2 and you want to use tables external preprocessor),... I put (I think all) of the options on my BLOG http://jiri.wordpress.com/2010/01/04/load-ms-excel-file-to-oracle-database/WRITING IN EXCEL
Writing in excel is delicate because there is no direct way of Oracle, here are a few tips1 JAVA - you can create java stored procedure, I did not test this, but it's probably doable http://www.java-tips.org/other-api-tips/jexcel/how-to-create-an-excel-file.html
2. XML Excel format - you can use UTL_FILE and writing to XML Excel can read http://blogs.msdn.com/b/brian_jones/archive/2005/06/27/433152.aspx
3 Excel also reads the CSV files, but it's file plan text without formatting. You can use UTL_FILE to easily create a CSV (comma-delimited) file and read from excel, I have some examples on my blog http://jiri.wordpress.com/2009/03/18/oracle-fast-parallel-data-unload-into-ascii-files/
Maybe you are looking for
-
iOS 10 takes a lot of time synchronization and backup iPad to iTunes
Has anyone noticed that it takes unusually long to synchronize and back up their iPad to iTunes after that 10 updated iOS? What used to take three minutes, it's now at least 15 minutes. My iTunes is up to date. Thanks for ideas or confirmations of th
-
I have a HP 6560 b with Windows 7. Only in the last days, this problem. When the monitor goes to sleep, I can't wake him up. I can hear the computer wake up - the fan starts - but the screen remains dark. I have to reboot to get to the back of th
-
Windows live messenger keeps popping up in the start menu
Windows live messenger keeps popping up in the start menu
-
I have a Cisco VPN 3060 concentrator and sometimes I get the following message from syslog. What does this error mean? Local7.warning, SEV 2 RPT EVENT/42 = 30 = save to FTP server failed (9)
-
HP Battery Check status: unknown (90)
HP dv4-2165dx running Windows 7 64 bit with Support Assistant 5.2.9.2 and battery check 4.0.16.0 Battery status says 'unknown', with the 100% battery charge. Battery seems to work very well, but not checking the battery does not seem to be able to c